Regression Test
tests the software changes, then that code affected by change and finally runs full suite of tests.
See Also: Regression Testing
-
Product
Manual Testing
-
At UpDoer Technology, we're dedicated to providing you with quick and accurate test results. We offer a range of manual testing services to fulfill your needs and keep your projects on schedule and within budget. We follow a test-driven development approach to ensure quality at every moment of the software development cycle.
-
Product
Rotor Testing
-
Rotor testing equipment is capable of testing cast rotors of a range of sized and variety of designs. It is operator friendly and easy to maintain. It has data acquisition system that operates through software on PC. It offers high level analysis of individual measurement. Also allows maintaining records & generating reports with ease and flexibility.
-
Product
Switchgear Test Systems / Circuit Breaker Testing
-
ACTAS test systems provide precise information as to the condition of the chamber and drive unit without requiring them to be opened. The sheer number of parameters to be determined, the wide variety of different types of switchgear equipment in use and the harsh environmental conditions encountered during on-site tests place extreme demands on test equipment.
-
Product
Test Module
MTC
-
The measuring channels can be connected depending on the application to the pins on the system interface or to the six internal bus lines.Four measuring channels per module on 8:1 multiplexer = 32 InputsUp to 4 parallel measurements per MTC (4 parallel counters)Intelligent algorithms for fast measurements even at low frequenciesFrequency, period, pulse width, rise- and falling time as well as event counting on each channelTime measuring range: 10 ns - 42 s, resolution 10 nsFrequency measuring range: 0.015 - 100 MHzEvent counting: 0 - 232, maximum 100 MHzMax. input level/trigger voltage: +/-100 VSynchronization with external trigger possible
-
Product
Cleanroom Testing
-
MicroStat Laboratories -R.E.T.S.
We utilize the relevant test methods and standards set forth by the ESD Association, ANSI, ASTM, NFPA, IEST, IEC, ISO, or our clients’ in-house specifications. ESD testing is performed in-house; other testing can be arranged through sub-contractors with interpretation of results performed by experienced contamination control experts..
-
Product
Test Receiver
FSWT
-
The R&S®FSWT is the right tool for detecting compromising emanations. With two equivalent, switchable RF inputs, up to 500 MHz measurement and analysis bandwidth and two analog outputs for video voltage and demodulators, the R&S®FSWT fits perfectly into typical test setups and easily replaces older instruments.
-
Product
Functional Testing
-
Whatever your functional testing requirement, whether analogue, digital, or a combination of technologies, we have a solution. With over 2500 applications delivered in this field we have a level of experience that cannot be matched. Ensure the reliability of your product with our functional testing tools. Our functional test solutions range from completely standalone applications to those matched for our FLEX range of ATE test systems. Whatever your testing needs, we will help you choose the best option for you.
-
Product
Testing Services
-
We are professionals who deliver software testing services. We are able to boost your software testing, increase product quality and reduce costs.
-
Product
Test Fixtures
-
Pneumatically actuated Kelvin connection to custom manufactured device inserts either to complement ART's wide range of precision parametric test equipment or for use with third party measurement hardware.
-
Product
Diagnostic Testing
-
Response Dynamics Vibration Engineering, Inc.
Response Dynamics has made diagnostic testing our core focus for over 30 years. We do this detective work well because we have particular expertise in structural dynamics and how it relates to vibration and acoustic noise issues on a myriad of levels. We enjoy this work because it stays interesting and draws on multiple disciplines in engineering and science.
-
Product
Test Sockets
BGA/LGA
-
There are a lot of options when it comes to bench test sockets. Save yourself and your lab time, money and frustration by working with Ardent for truly customized test socket solutions to meet your needs and do the job with high performance, reliability and quick turnaround that you need and deserve.
-
Product
Test Software
DISPATCHER
-
DISPATCHER is offered as a fully functional download with a 15-day free trial period. In this way, you can fully test the software and connectivity before purchasing a license, to be sure it will work properly with your hardware.
-
Product
Sound Testing
SP series
-
Are ideal for on-site measurements in accordance with the noise at work legislation for industrial and office environments.
-
Product
Quick Test Connectors
-
Pressure-tight connection in seconds. Since 1980 WEH have offered an innovative range of test connectors, which can make pressure- and function-tight connections in seconds. The vast product line includes quick connectors for pressure, vacuum, function and leak testing.
-
Product
Backplane Test System
402HV
-
Our model 402HV is the result of 25 years of high voltage / high pin count test systems experience. We produced our first high voltage system back in 1985. It was programmable up to 600 volts / 600 Mohms and had over 49,000 test points. It could test a 5k point board in less that 15 seconds. Since then we have built hundreds of high voltage test systems, with our highest voltage system capable of testing up to 2000 Volts DC / 1500 Volts AC. (One of our 600 volt systems, built in 1986 is still in operation testing boards for a defense contractor.)
-
Product
Parts Screening And Testing
-
DPA Components International performs 100% screening as well as qualification testing on electronic parts supplied to the high reliability Commercial, Industrial, Space, and U.S. Military sectors. We generate software and hardware to test microcircuits, discrete semiconductors, hybrids, PEMS, and other EEE electronic components to exact customer and military specifications.
-
Product
Test Automation Framework
softTAF
-
SoftTAF is Softdel’s test automation framework for testing your embedded systems products. SoftTAF provides automated test coverage with no manual intervention required. SoftTAF was developed to use fewer resources and requires less time compared to manual testing.
-
Product
Armature Test Systems
-
Automation Technology's ATS-3800 is at the top of the class when it comes to Armature Test Systems. The ATS-3800 is packed with standard features and like all of ATI's 3800 Series Test Systems; it is backed by ATI's industry leading two-year limited warranty. The ATS-3800 offers the most comprehensive testing of armatures available.
-
Product
Compatibility Testing
-
An application is incomplete if it is not compatible with the user environment so that the user can operate it
-
Product
Transformer Testing And Monitoring
-
Can detect the symptoms of transformer failure by monitoring the cooling system, load tap changer, dissolved gas, bushing power factor and capacitance, partial discharge, oil levels, pressure, temperatures and more.
-
Product
Battery Testing Equipment
-
Mainly for battery testing in lab,such as 5V1mA, 5V10mA, 5V50mA,5V100mA, 5V1A,5V3A,5V6A,5V10A
-
Product
Professional Test Management
Klaros-Testmanagement
-
verit Informationssysteme GmbH
Klaros-Testmanagement is a database-driven web application and assists you in assembling, managing and analyzing your test data and test cases. The guided, automatically logged test execution and integrated management of test planning allows a reproducible test process at any time.
-
Product
Nanomechanical Test System
Hysitron TS 77 Select
-
The Hysitron TS 77 Select automated benchtop nanomechanical and nanotribological test system provides the highest level of performance, functionality, and accessibility of any instrument in its class. Built around Bruker’s renowned TriboScope capacitive transducer technology, this new test system delivers reliable mechanical and tribological characterization over nanometer-to-micrometer length scales.
-
Product
PCB Test Points
-
Test Socket 2mm. Plug 2mm. Measuring Socket 2mm . 2 Pin Test Socket 2mm. Miniature Test Socket 2mm
-
Product
Portable Test System
MT680s
-
Actual value, vector, curve displaypower generationerror measurementMeasurement of harmonics up to the 40thVoltage supply via existing measurement voltage
-
Product
Functional Test Systems
-
With extensive experience in functional test equipment, a world-wide service and support organization, and a broad range of software/hardware options, we will supply cost-effective production-ready test solutions to meet your test challenges. Proposals developed by our functional test engineering team include a detailed description of system requirements, test instrumentation, estimated test cycle times (as applicable), footprint, and other key specifications.
-
Product
Environmental Testing Equipment
-
It is to do adaptability and properties test for materials under different environment conditions, which includes salt spray test to determine corrosion resistance and temperature and humidity chamber to do a variety of high-low temperature alternating test.
-
Product
Usability Testing
-
Do your customers have to navigate through a maze of actions on your application to achieve what they need to? Are your customers leaving your website without completing the purchase since they could not find the right link or page?
-
Product
Test Equipment
Digital Multimeter
-
*True RMS*2,000 counts*Auto/manual range*Auto power off (APO): 5 mins approx.*Over range display*Non-contact AC voltage detection (NCV) (with audible sound and visible indication)*Auto/manual AC/DC voltage measurement (600V AC/750V DC)*Auto/manual resistor measurement: 0-20MΩ (approximate)*Continuity check: approximate <50Ω buzzer sounds*Diode check*Auto/manual AC/DC current measurement (mA/mA/10A)
-
Product
Test Power Rectifiers
-
Kinetics has designed and manufactured various types of power rectifiers for traction test applications that include both power and electronic loads. Kinetics’ engineers will use our extensive application experience to work with an application’s specifications for the design and manufacture of a testing unit that provides the optimum power system for a customer’s application.
