Teledyne RF & Microwave
Teledyne RF & Microwave Solutions (RF&M) has over 50 years of experience in the design, development, and manufacture of sophisticated microwave/RF components and integrated assemblies for the most demanding challenges. Our products are sought after by civilian and military organizations spanning numerous markets, including Aviation, Communication, Electronic Warfare (EW/ECM/CIED), Industrial, Missile/UAV, Radar, Satcom, Space, and Test and Measurement. Our product portfolio is one of the most comprehensive RF/MW product lines in the world.
- (650) 691-9800
- microwave@teledyne.com
- 1274 Terra Bella Avenue
Mountain View, CA 94043
United States
-
product
IQ Networks
Teledyne Microwave Solutions (TMS) offer a capable range of high performance IQ Modulators and Image Reject Mixers as well as IQ (Quadraphase) Modulators which can be used on applications from commercial test equipment to space qualified projects. IQM products can be used either as an IQ modulator or IQ demodulator and cover several frequency bands from 1.4 GHz to 18 GHz.
-
product
VHF Band 1.0 Watt Amplifier With RF Bypass
Teledyne RF & Microwave has developed a 35 to 350 MHz custom amplifier with 1 watt output power. The amplifier has 29 dB gain with 3 dB noise figure. The amplifier assembly has a RF switch so that the RF input can be connected directly to the output bypassing the amplifier. The amplifier goes into the "bypass" state when the DC bias is removed from the switch. This unit is one of a series of amplifiers that covers the 1 MHz to 2100 MHz with similar operation.
-
product
Switch Amp
One of many potential designs, Teledyne RF & Microwave's switched amplifier covers 100 to 2000 MHz, providing 18 dB gain, phase matched to within ±1.0 degree. The primary RF input and a secondary calibration signal input are switched, then amplified, and split to two outputs. Gain balance between any of the two outputs is ± 0.5 dB. Output power at 1 dB compression is +14 dBm and input/output VSWR is 2.0:1 maximum.
-
-
product
Frequency Doublers
Teledyne Microwave Solutions (TMS) offers several Frequency Doublers providing high fundamental suppression, broadband input/output frequencies, and low conversion loss figures for a variety of communications applications.
-
product
Attenuators
Teledyne Microwave Solutions (TMS) offers a variety of analog controlled attenuators operating over a 10MHz to 26GHz range. With many units operating over many octaves, switching speeds less than 100nS and attenuation control up to 50dB, TMS has a product that meets your demanding needs.
-
product
Solid State Power Amplifiers
By combining significant R&D funding with judicious acquisitions of microwave technology leaders, Teledyne Microwave Solutions (TMS) has built a strong portfolio of SSPAs supported by innovative, collaborative engineering and manufacturing teams. Covering 100MHz to 100GHz, with power from 0.1W to 10kW, TMS SSPAs include both Pulsed and CW for all markets, from commercial Satcom to military and space qualified platforms.
-
product
Integrated Assemblies Products
Teledyne Microwave Solutions offers State of the Art integrated microwave assemblies (IMAs), utilizing custom building blocks and mixed media construction techniques to meet the most challenging performance and size constraints on the market today.
-
product
Switched Amplifier With Analog Detector Output
Operates at 3 GHz-10 to -5 dBm Input Power to +4 to +7 Output powerAnalog Detector OutputTTL Compatible, 70 dB On-to-Off Ratio, 50 ηSec Response Integrated RF Switch
-
product
Communication Systems
Tactical networking radio system comprising of transmit/receive modules, converters, synthesizer, RF switching, power supplies, controllers and an antenna array. The radio automatically selects the best communications path to create a self-forming, self-healing network.
-
product
2 To 18 GHz 6 Channel Downconverter
Teledyne RF & Micrrowave's Six Channel 2 - 18 GHz (RF and LO) downconverter operates with an IF of ~960 MHz, providing 25 dB of RF-IF gain, and bandwidth of ~500 MHz. This downconverter operates on a single LO at -6 dBm which is amplified, split, then again amplified to each of the 6 channels. Integrated into each channel is a range extension switch, controlled by a TTL input and adding 20 dB attenuation. Noise figure is ~ 13.5 dB and output IP3 is ~+25 dBm. The downconverter is 2- sided, hermetically sealed and designed for rugged applications.
-
product
Standard Amplifiers
Teledyne RF & Microwave, a Business Unit of Teledyne Microwave Solutions (TMS), supplies catalog and custom RF and microwave amplifier designs for aerospace, defense, and industrial applications. These standard amplifiers, originally designed by Teledyne Cougar, provide both excellent stability and cascadability.
-
product
Low Noise Dual Band VCO
This custom oscillator subassembly consists of two low noise oscillators covering 1.5 to 2.5 GHz, a power combiner, a standard Teledyne RF & Microwave amplifier, and a lowpass microstrip filter. Teledyne RF & Microwave designed both oscillators for low phase noise and linear tuning. The output frequency bands are switched using standard TTL control.
-
product
Gain Shape Linearizer Amplifiers
Gain Shape amplifiers are used in a number of applications where it's necessary to flatten the gain characteristic of the preceding or following component. This would include flattening the attenuation of a long cable run or perhaps changing the input gain response to a MPM (Microwave Power Module) or TWT (Traveling Wave Tube) to compensate for the gain variation within the tube.
-
product
IQ Demodulator
Teledyne RF & Microwave IQ Demodulators are fully space-qualified designs providing stringent phase and amplitude matching, and superior output third order intercept performance. To meet high LO and IF rejection requirements diplexers are used at the I and Q ports. All components and processing fully meet MIL-PRF-38534, Class K and MIL-DTL-28837. Teledyne RF & Microwave can provide performance to meet most receiver system requirements, including single or moving LO frequencies and tight phase and amplitude matching. Customers can specify our designs for space, military, or commercial applications.
Parent
-
Teledyne Technologies Incorporated
Teledyne Technologies Incorporated provides enabling technologies for industrial growth markets that require advanced technology and high reliability. These markets include aerospace and defense, factory automation, air and water quality environmental monitoring, electronics design and development, oceanographic research, deepwater oil and gas exploration and production, medical imaging and pharmaceutical research.
-
Teledyne Defense Electronics
From advanced RF/Microwave systems to Hi-Voltage Interconnects & Components to comprehensive Space-qualified offerings and aerospace materials, our portfolio is sought after by technology leaders large and small worldwide. Leveraging the capabilities and the unique breadth of our many leading Teledyne Defense Electronics brands, we engineer solutions to meet your most complex specifications.
Siblings
-
Teledyne FLIR
A world leader in the design, manufacturing, and marketing of thermal imaging and stabilized camera systems for a wide variety of thermography and imaging applications including condition monitoring, research and development, manufacturing process control, airborne observation and broadcast, search and rescue, drug interdiction, surveillance and reconnaissance, navigation safety, border and maritime patrol, environmental monitoring and land-based security.
Siblings
-
Teledyne Advanced Pollution Instrumentation
Teledyne API (TAPI) designs and builds precision air quality and industrial gas monitoring instrumentation at our factory located in San Diego, California, USA. Our products are used worldwide in ambient air quality monitoring systems (AQMS), continuous emissions monitoring systems (CEMS), and industrial process applications.
Siblings
-
Teledyne Marine Benthos
Teledyne Benthos designs and manufactures rugged and reliable oceanographic instrumentation and sensor solutions for marine environments. Teledyne Benthos product lines include: acoustic communications, acoustic recovery and acoustic positioning technology.
Siblings
-
Teledyne DALSA
DALSA Corporation is an international high performance semiconductor and electronics company that designs, develops, manufactures and markets digital imaging products and solutions, in addition to providing specialized wafer foundry services.
Siblings
-
Teledyne e2v
Teledyne e2v is a global leader in specialised components and subsystems for innovative solutions in medical, science, aerospace, defence, and industrial applications.
Siblings
-
Teledyne Energy Systems, Inc.
Teledyne Energy Systems, Inc. (TESI), a Teledyne Technologies Company, is a leading global provider of on-site gas and power generation systems and fuel cell test equipment.
Siblings
-
Teledyne ICM
At ICM, we have more than 20 years of expertise that has been fully dedicated to the development, manufacturing and marketing of highly innovative portable X-Ray solutions. Nowadays, this know-how is used throughout the world in a wide range of applications and products. This includes its use for Non Destructive Testing applications, such as of welding inspections, as well as for such security functions as the scanning of suspect objects. We are proud to say that ICM’s products always deliver accurate, clear and reliable results.
Siblings
-
Teledyne LeCroy quantumdata
Leading provider of innovative solutions for testing emerging video technologies.
Siblings
-
Teledyne LeCroy
Teledyne LeCroy is a leading provider of oscilloscopes, protocol analyzers and related test and measurement solutions that enable companies across a wide range of industries to design and test electronic devices of all types. Since our founding in 1964, we have focused on creating products that improve productivity by helping engineers resolve design issues faster and more effectively.
Siblings
-
Teledyne Leeman Labs
We are a company of scientists, engineers, and service professionals that are truly passionate about what they do, and that's atomic spectroscopy. Producing world-class instruments for elemental analysis is our mission. Our goal - through continuous innovation, dedication, and fresh thinking - is to constantly raise the bar, providing scientists and analysts with cutting edge instruments that deliver extraordinary results.
Siblings
-
Teledyne Marine Oceanscience (Obsolete)
Teledyne Oceanscience supplies the hydrologic and hydrographic community with deployment platforms for environmental monitoring and survey instrumentation. We manufacture remotely-controlled unmanned surface vehicles (USVs) for echo sounders and ADCPs. We also manufacture turnkey remote hydrographic survey boat systems, typically including environmental monitoring or bathymetry equipment, GPS positioning and data telemetry.
Siblings
-
Teledyne Marine Odom Hydrographic
2015 marked a milestone of 30 years of manufacturing echosounding equipment, Teledyne Odom Hydrographic (formerly Odom Hydrographic Systems) continues its legacy of unwavering dedication to the principles of customer service and product innovation. With over five thousand echosounders produced and distributed worldwide, Teledyne Odom Hydrographic has established an enviable high standard for product reliability and customer service that is unmatched.
Siblings
-
Siblings
-
Teledyne Marine RD Instruments
Teledyne RD Instruments was founded in 1982 and revolutionized the industry through the development of the first acoustic Doppler current profiler (ADCP). Now a part of the Teledyne Marine group, Teledyne RD Instruments continues to be an innovative force in the industry by designing, improving and manufacturing, proven solutions for current profiling, wave measurement, and precision navigation. With a staff of over 100 scientists, engineers, technicians, and sales and support personnel, the company's San Diego-based global headquarters is an 80,000 square-foot ISO-9001:2008 facility that includes state-of-the art engineering, laboratory, manufacturing, and test areas.
Siblings
-
Teledyne Marine RESON B.V.
Teledyne RESON, together with Teledyne BlueView and Teledyne Odom Hydrographic make up the Teledyne Marine Acoustic Imaging Group (TMAIG). We develop some of the world's most sophisticated sonar technology. The group offers the strongest collective product portfolio in the market for subsea acoustic imaging and multibeam echosounder solutions.
Siblings
Siblings
-
Teledyne Photometrics
Teledyne Photometrics designs and manufactures high performance Scientific CMOS, CCD and EMCCD cameras that support demanding, quantitative bio-research. The original architect of the first scientific-grade EMCCD, Teledyne Photometrics maintains its leadership role with the release of it’s award winning Prime, the sCMOS camera with built-in computational intelligence for image restoration, and Prime 95B, the industry’s first Scientific CMOS camera with 95% Quantum Efficiency for the highest sensitivity available. More recently, the company expanded it’s CMOS camera offerings to include the Prime BSI Scientific CMOS and the Iris 15 Scientific CMOS cameras.
Siblings
-
Teledyne SP Devices
Teledyne SP Devices designs, develops, and manufactures world-leading modular data acquisition and signal generation instruments. As a part of the Teledyne family with over 15 500 employees worldwide, we have access to some of the industry's most knowledgeable experts, research and development capabilities, and manufacturing facilities worldwide.
Siblings
-
Teledyne Princeton Instruments
Teledyne Princeton Instruments (TPI), a business unit of Teledyne Digital Imaging US, Inc, designs and manufactures high-performance CCD, sCMOS, ICCD, EMCCD, emICCD, and InGaAs cameras; spectrographs; and optics-based solutions for the scientific research, industrial imaging, and OEM communities. We take pride in partnering with our customers to solve their most challenging problems in unique, innovative ways. Teledyne Princeton Instruments has two U.S. manufacturing facilities, one located in New Jersey (Trenton) and one in Massachusetts (Acton). Our worldwide sales and service organizations in Germany, France, the United Kingdom, Japan, and China provide sales support and discuss application requirements in addition to being your local contacts for order processing and service.
Siblings
-
Teledyne Hanson Research
Hanson Research, an innovative leader in the design and manufacturing of dissolution testing and diffusion testing instruments for the pharmaceutical industry. Hanson Research, founded in 1951 by Dr. William A. (“Bill") Hanson, designed and manufactured the world's first six-vessel dissolution testers in 1969, and the first fully automated dissolution testing system, the Dissograph, in 1975. Widespread adoption of Hanson's technology along with an extensive support network made Hanson a trusted supplier for pharmaceutical development and manufacturing lab facilities in 75 countries worldwide. In the diffusion-testing line, focused on transdermal drug formulations, Hanson's innovative vertical diffusion cell, a modified Franz cell, led the way, eventually becoming officially incorporated into the United States Pharmacopoeia (USP) as “Apparatus A." Hanson's Microette™ automated diffusion testing system was first released in 2000, and an advanced design in 2014.
Siblings
-
Teledyne Princeton Instruments (Obsolete)
Teledyne Princeton Instruments (TPI), a business unit of Teledyne Digital Imaging US, Inc, designs and manufactures high-performance CCD, sCMOS, ICCD, EMCCD, emICCD, and InGaAs cameras; spectrographs; and optics-based solutions for the scientific research, industrial imaging, and OEM communities. We take pride in partnering with our customers to solve their most challenging problems in unique, innovative ways. Teledyne Princeton Instruments has two U.S. manufacturing facilities, one located in New Jersey (Trenton) and one in Massachusetts (Acton). Our worldwide sales and service organizations in Germany, France, the United Kingdom, Japan, and China provide sales support and discuss application requirements in addition to being your local contacts for order processing and service.
Siblings
-
Teledyne Marine
Teledyne Marine is a group of leading-edge subsea technology companies that are part of Teledyne Technologies Incorporated. Through acquisitions and collaboration over the past ten years, Teledyne Marine has evolved into an industry powerhouse, bringing Imaging, Instruments, Interconnect, Seismic, and Vehicle technology together to provide total solutions to our customers. Each Teledyne Marine company is a leader in its respective field, with a shared commitment to providing premium products backed by unparalleled service and support.
Siblings
-
Teledyne Marine AG Geophysical Products
AG Geophysical supplies the world’s marine seismic fleet with the highest quality submersible connectors engineered to work in the most hostile of working environments. AG Geophysical has built a reputation for solid engineering, performance that excels in the ocean’s depths and a reliability that won’t crack under pressure. As a company, our methods of production, quality assurance, technical support and service remain unparalleled in the marine seismic sector.
Siblings
-
Teledyne Marine BlueView
Teledyne BlueView is a worldwide leader in 2D imaging and 3D scanning sonar technology. The company’s advanced sonar systems are currently deployed on AUVs, ROVs, surface vessels, fixed positions, portable platforms, and have been adopted by leading manufacturers and service providers to support mission-critical operations.
Siblings
-
Teledyne Marine Bolt
Teledyne Bolt is a leading worldwide developer and manufacturer of seismic energy sources used in offshore seismic exploration for oil and gas.
Siblings
-
Teledyne Marine Bowtech
Teledyne Bowtech specialises in the design and manufacture of underwater vision systems including: video inspection systems, underwater cameras, underwater LED lights, xenon emergency relocation strobes, custom moulded cable assemblies, pan and tilts, electrical and fibre-optic connectors, fibre-optic multiplexers and slip rings for use in hazardous areas or subsea.
Siblings
-
Teledyne Marine Cable Solutions
Teledyne Cable Solutions is comprised of Storm Cable and VariSystems, an integrated alliance supplying engineered solutions to challenging cable situations. TCS provides application-specific, multi-core cable and ruggedized assemblies for a variety of industries.
Siblings
-
Teledyne Marine Cormon
Teledyne Cormon designs and manufactures subsea and surface erosion and corrosion sensors, as well as flow assurance monitoring systems.
Siblings
-
Teledyne Marine DGO
Teledyne DGO designs connection systems that transmit signals, data or power through challenging media, such as subsea oil wells, and through pressure barriers, such as the hull of a submarine. Because the cost of failure is so high, Teledyne DGO designs and manufactures its products to deliver total reliability. We engineer and manufacture our products as if lives and fortunes depended on them. Because they do. Teledyne DGO designs and manufactures systems to transmit signals, data and power in applications where failure to perform may contribute to substantial lost revenue, aborted missions or even loss of life: •Aircraft •Biomedical devices •Deep-sea exploration vehicles •Offshore oil and gas operations •Power generation, including nuclear power •Submarines
Siblings
-
Teledyne Marine Geophysical Instruments
Teledyne Geophysical Instruments has earned a strong reputation in the industry for delivering high-quality marine seismic exploration products. Our products are used aboard more than one-third of all commercial seismic research vessels.
Siblings
-
Teledyne Marine Impulse
Teledyne Impulse designs and manufactures high reliability electrical and optical interconnection systems, motorized power transfer switches, and custom insert molded compression connectors for a broad range of harsh environment applications. The company’s products are proven performers in the most demanding applications, which include oceanographic exploration, spacecraft and launch vehicles, defense, oil and gas production, nuclear systems, and wastewater management.
Siblings
-
Teledyne Marine Impulse-PDM
Teledyne Impulse-PDM designs and manufactures underwater connectors and harnesses for harsh environments. Impulse-PDM has over 30 years experience in mechanical, electrical, and optical design, as well as considerable expertise in material selection for subsea applications.
Siblings
-
Teledyne Marine Oceanscience
Teledyne Oceanscience supplies the hydrologic and hydrographic community with deployment platforms for environmental monitoring and survey instrumentation. We manufacture remotely-controlled unmanned surface vehicles (USVs) for echo sounders and ADCPs. We also manufacture turnkey remote hydrographic survey boat systems, typically including environmental monitoring or bathymetry equipment, GPS positioning and data telemetry.
Siblings
-
Teledyne Marine ODI
Teledyne ODI provides subsea electrical and fiber optic interconnect systems for the harshest environments and at any ocean depth. Wet mateable connectors include signal and high-power electrical, fiber optic, and hybrid electro-optical products all based on patented oil-filled, pressure-balanced technology. Dry mate submersible connectors also provided.
Siblings
-
Teledyne Marine Seabotix
The Seabotix vectored Little Benthic Vehicle (vLBV) is the ultimate MiniROV with over 1600 units sold over 20 years to every corner of the world. The vLBV300 system offers features for use in a full range of applications, industries, and environments. SeaBotix ROVs are industry accepted and field-proven in real-world conditions around the globe.
Siblings
-
Teledyne Marine PDS
Teledyne PDS is a multipurpose software platform and supports a wide range of tasks within Hydrography, Dredge Guidance, Construction Support, Search & Recovery Operations and Port Entrance Monitoring.
Siblings
-
Teledyne Marine Real Time Systems
Teledyne Real Time Systems provides seismic source synchronizing equipment to the global seismic data acquisition community.
Siblings
-
Teledyne Marine TSS
Teledyne TSS is a world leader in the design, manufacture and support of marine products for applications including navigation, motion compensation, platform stabilisation, and subsea pipe and cable survey. The company has specialist sales and support worldwide through a comprehensive network of distributors and service providers.
Siblings
-
Teledyne Marine Webb Research
Teledyne Webb Research designs and manufactures scientific instruments for oceanographic research and monitoring. Teledyne Webb Research specializes in three areas of ocean instrumentation: Neutrally buoyant, autonomous drifters and profilers, autonomous underwater gliding vehicles, and moored underwater sound sources.
Siblings
-
Teledyne Lumenera
Teledyne Lumenera, part of the Teledyne Imaging Group, is a leading developer and manufacturer of high performance digital cameras and custom and OEM imaging solutions used worldwide for industrial and scientific applications.
Siblings
-
Teledyne e2v (Obsolete)
eledyne e2v is part of the Teledyne Imaging group of leading-edge companies aligned under the Teledyne umbrella. With unrivalled expertise across the spectrum and decades of experience, the collective of Teledyne Imaging offers world-leading technology and exceptional capabilities in sensing and synthesis, helping you capture better data and analyze it for better decisions.
Siblings
-
Teledyne AnaFocus
Teledyne AnaFocus is a supplier of standard off-the-shelf and customized high performance, high quality vision and CMOS sensor technology for the industrial, professional, scientific, medical and high end surveillance markets.
Siblings
-
Teledyne Defense Electronics
From advanced RF/Microwave systems to Hi-Voltage Interconnects & Components to comprehensive Space-qualified offerings and aerospace materials, our portfolio is sought after by technology leaders large and small worldwide. Leveraging the capabilities and the unique breadth of our many leading Teledyne Defense Electronics brands, we engineer solutions to meet your most complex specifications.
Siblings
-
Teledyne RF & Microwave (Obsolete)
Teledyne RF & Microwave has more than 50 years experience in the design, development, and manufacture of sophisticated components and integrated microwave assemblies optimized for the most demanding applications and harshest operating environments, from deep sea to space.
Siblings
-
Teledyne Relays
Teledyne Relays is Everywhereyoulook™, providing switching solutions for aviation, test & measurement equipment, industrial control, and military & space applications. With bandwidths from DC - 18GHz and signal integrity up to 40Gbps, Teledyne’s ultraminiature surface-mountable relays are perfect for high frequency and high throughput applications. Teledyne Relays offers industrial solid state relays for precise heating, lighting and motor control. For extreme environments and integration into ultraquality military systems, Teledyne offers military solid state relays.
Siblings
-
Teledyne Storm Microwave
Teledyne Storm Microwave has been providing high-quality interconnect products and cable assemblies to domestic and international defense, space and telecom markets since 1978.
Siblings
-
Teledyne Lincoln Microwave
Serving Defense, Space and Commercial sectors worldwide, Teledyne Defense Electronics (TDE) offers a comprehensive portfolio of highly engineered solutions that meet your most demanding requirements in the harshest environments. Manufacturing both custom and off-the-shelf product offerings, our diverse product lines meet emerging needs for key applications for avionics, energetics, electronic warfare, missiles, radar, satcom, space, and test and measurement.
Siblings
-
Teledyne Paradise Datacom
Teledyne Paradise Datacom, a division of Teledyne Defense Electronics, LLC, designs, manufactures and sells satellite modems, solid state power amplifiers (SSPA), block up converters (BUC) and associated redundancy subsystems. We deliver satellite communications products around the world.
Siblings
-
Teledyne Analytical Instruments
Teledyne Analytical Instruments (TAI) is a world leader in the design and manufacturing of high quality gas and liquid analyzers with a product line that includes: electrochemical sensors, analyzers and custom systems which combine expertise in electronics, chemistry and engineering. Our products and services cover many industries including: air separation/bulk industrial gas manufacturing, chemical and petrochemical processing, cement, metals and metal processing, oil and gas, medical/pharmaceutical, nuclear, power generation, pulp and paper, safety, semiconductor/ electronics and steel. With over 50 years of experience, TAI's mission is to meet the industry's varied requirements for gas and liquid analysis. In addition, detailed attention to our customers' needs and dedication to the highest standards of performance and quality are just some of our top priorities. These standards are enhanced by our ISO 9001:2015 certification.
Siblings
-
Teledyne Gas & Flame Detection
Teledyne Gas and Flame Detection uses its global capability, manufacturing excellence, and custom engineering to provide end-to-end gas and flame detection solutions for a wide range of hazards worldwide. With an industry-leading, comprehensive portfolio of products and services, our commitment to cross-platform integration provides protection for today and confidence for tomorrow.
Siblings
-
Teledyne OEM Solutions
SSI and CETAC join forces to leverage our liquid management expertise and automation solutions to deliver a one source solution that satisfies the needs of global instrument manufacturers (OEMs). Decades of serving OEMs with innovative solutions, using advanced technologies, over a broad spectrum of techniques (ICP to HPLC…) with a team that has a true passion to exceed our OEM customers' expectations.
Siblings
-
Teledyne Hastings Instruments
Teledyne Hastings Instruments is a trusted manufacturer of a wide range of quality Vacuum Instruments and Gas Mass Flow Instruments . Our vacuum product line includes the original DV-4 and DV-6 thermocouple gauge tubes, along with other vacuum sensors used in combination with meters and controllers that cover a wide range of vacuum pressure from atmosphere to ultra high vacuum. The gas mass flow line of meters and controllers cover a broad range of flow rates from 5 sccm to 15,000 slm that includes a variety of flexible options for outputs, calibration, and fittings.
Siblings
-
Teledyne ISCO
ISCO, Inc., was founded in 1958, and since its inception has been headquartered in Lincoln, Nebraska, USA. Through our focus on designing and building products to meet specialized customer needs, the company grew from founder Dr. Robert Allington's garage into its current 200,000 square foot plant. In June of 2004, Isco was acquired by Teledyne Technologies, Inc., becoming Teledyne ISCO and beginning a new chapter in the company's story. Today, Teledyne ISCO manufactures a wide range of products for professionals working in water pollution monitoring and abatement, engineers and managers involved with wastewater process control, and scientists involved in field and laboratory work. We have always taken pride in the fact that the products we produce are used by our customers to improve the quality of life on Earth. Benefits realized from the use of ISCO products range from maintaining a clean environment, to developing disease-curing drugs and finding new energy supplies.
Siblings
-
Teledyne Monitor Labs
Teledyne Monitor Labs (TML) has more than 50 year’s global experience in the design and manufacture of continuous emission monitoring systems (CEMS), process monitoring, industrial sensors and instruments, ambient monitoring and software. Our services and products serve the following industries: power generation, oil/gas refining, petrochemical, cement, lime, pulp and paper, steel, chemical, and agriculture.
Siblings
-
Teledyne Tekmar
Teledyne Tekmar is a leader in the design and manufacturing of analytical instrumentation for the laboratory providing productivity-enhancing instrumentation and solutions to a number of industries. Our world-renowned product lines include Volatile Organic Compound (VOC) systems for Gas Chromatography (GC) Sample Introduction, High-Throughput Purge and Trap sample concentration and Sample Automation. The Total Organic Carbon (TOC) Analyzers provides unparalleled accuracy, precision, throughput and robustness for water samples.
Siblings
-
Teledyne LABS
Teledyne LABS is a collection of decades-old Teledyne brands contributing to the research, development and manufacturing of laboratory instruments and technologies used around the globe. You’re sure to recognize some or all of the entities comprising Teledyne LABS. After all, we’re Everywhereyoulook™:
