Filter Results By:
Products
Applications
Manufacturers
-
product
Deep Submersible Particle Size Analyzer
LISST-Deep
The LISST-DEEP instrument obtains in-situmeasurements of particle size distribution,optical transmission, and the opticalvolume scattering function (VSF). Using ared 670nm diode laser and a customsilicon detector, small-angle scatteringfrom suspended particles is sensed at 32specific log-spaced angle ranges. Thismeasurement is post-processed to obtainsediment size distribution, volumeconcentration, optical transmission, andVSF. The electronics and opticalconfiguration in the LISST-DEEP are verysimilar to Sequoia’s workhorse, the LISST-100X. However, because of the extremedifficulty associated with keepingalignment under high pressure, the LISSTDEEPhardware design is radically differentfrom the LISST-100X. This allows theLISST-DEEP to be deployed down to 3000m and obtain reliable measurements ofthe in situ particle size distribution andvolume concentration in waters withoptical transmission up to 98.5%.
-
product
Particle Metrology System
Archimedes
Archimedes is an innovative instrument which uses the technique of resonant mass measurement to detect and accurately size and count particles in the size range 50nm to 5um*. Archimedes can distinguish different species from their buoyant mass is particularly useful when characterizing proteinaceous aggregates from contaminating silicon oil in biopharmaceutical preparations, in distinguishing bubbles from lipid micelles and contaminants in ultrasound contrast agents or protein from fat in dairy products.
-
product
Process Particles Suspensions
Process Particles™ Suspensions are used as particle material standards. They represent real-world contaminant particles encountered in semiconductor device fabrication processing. Deposition of these particles on wafers and reticles enables characterization of the material-dependent response of a surface inspection system when accurate particle size or particle sphericity are of secondary importance. They consist of broad size distributions of irregularly shaped solid particles suspended in ultra-pure water (UPW). Each bottle contains a suspension volume of 100 mL.
-
product
Prep HPLC & SFC Columns - 5 µm Spherical Particle Size
RediSep Prep
When you need the highest purity compound, the first choice in laboratories worldwide is Teledyne LABS RediSep Prep columns. Durable RediSep Prep columns are specifically designed to provide quick, accurate results to fulfill your High-Performance Liquid Chromatography (HPLC) and Supercritical Fluid Chromatography (SFC) needs.
-
product
Laser Scattering Particle Size Distribution Analyzer
Partica LA-960V2
This latest evolution in the LA series advances scientific knowledge for tomorrow's world through intuitive software, unique accessories, and high performance.The LA-960V2 continues HORIBA's proud tradition of leading the industry with innovative design.
-
product
Aggregation Analysis System For Biopharmaceuticals
Aggregates Sizer
The "Aggregates Sizer" aggregation analysis system enables the quantitative evaluation of particle amounts in the SVP range as a concentration (unit: μg/mL). Aggregations of biopharmaceuticals can be categorized into 3 ranges: IVP (In-visible Particle), SVP (Sub-visible Particle), and VP (Visible Particle), according to their particle size. Until now, no particle size analyzer could cover the SVP range with a single measurement. Therefore, multiple methods had to be used. Aggregates Sizer completely covers the SVP range.
-
product
Nanoparticle Analyzer
nanoPartica SZ-100V2 Series
A highly advanced analyzer solves the mysteries of the nano-world. A single device analyzes the three parameters that characterize nanoparticles: particle size, zeta potential, and molecular weight.
-
-
product
Nanoparticle Tracking Analyzer
ZetaView®
ZetaView® Nanoparticle Tracking Analyzer for hydrodynamic Particle Size, Zeta Potential and Concentration. With ZetaView® individual particle tracking, classical micro-electrophoresis and Brownian motion are presented as modern analysis tools. Auto-alignment and auto-focusing make the “Seeing is Believing” principle user friendly. By sub-volume scanning robust results of zeta potential and size histograms are derived from thousands of particles.
-
product
Portable Particle Size Analyzer
LISST-Portable|XR
Truly portable – completely self-contained with built-in data logger, processor, rechargeable battery, and 7” color touch screen display.Particle Size Range 0.35 to 500 micronsPumped and recirculating mixing chamber that keeps large and heavy particles suspended.Shock mounted optics block that can withstand the rigors of field use.A built-in ultrasonic probe for complete sample dispersion.Touch panel allows for easy SOP programming, sample analysis and display of data without a PC.Multiple Mie models as well as Fraunhofer model available for inversion, selectable from the touch panelAll data-processing is performed on board and stored in ASCII format. No post-processing necessary.Outputs: Total volume concentration, mean size, standard deviation, optical transmission, D5, D10, D16, D25, D50 (median grain size), D60, D75, D84, D90, D95, D60/D10 (Hazen uniformity coefficient), particle surface area, silt fraction, silt volume, size distribution, battery voltage, sample notes.Based on the laser diffraction principle. Compliant with ISO-13320-1 standard.
-
product
Laser Diffraction Systems
Since the release of the 7991 in 1974, the first commercially available particle size analyzer, Microtrac has been at the forefront of Laser Diffraction technology. By continuously improving the instrument technology, Microtrac offers customers a robust portfolio of Laser Diffraction instruments that’s ideal for particle sizing and characterization.
-
product
flow Coefficient
For the determination of the flow coefficient of fine aggregates up to 4 mm particle size.
-
product
Benchtop Small Angle X-ray Scattering (SAXS) Instrument
NANOPIX mini
Non-destructive measurement of particle size and size distribution.Rigaku NANOPIX mini is the world’s first benchtop small angle X-ray scattering (SAXS) system that is engineered to deliver automatic nanoparticle size distribution analysis for both quality control (QC) and research and development (R&D) applications. Nanoparticle size, size distribution, and particle shape are the key pieces of information obtained from SAXS. Samples may range from solutions, suspensions or slurries to solid plastics, rubbers or polymers.
-
product
Nano Particle Size Analyzer
SALD-7500nano
Delivering 10 times the sensitivity of previous models, this innovative analyzer is capable of continuously measuring changes in particle size and particle size distribution at one-second intervals, within a range spanning 7 nm to 800 μm. In addition, unique options that accommodate the measurement of even high-concentration samples (up to 20 wt%) and trace quantity samples (down to 15 μL) are available. Due to its leading-edge measurement capabilities, the analyzer will likely be used for many applications in new areas, including nanotechnology, the life sciences, and fine bubbles (microscopic bubbles).
-
product
Supermicron-Capable Particle Sizer Spectrometers
When your application requires measuring particle sizes above a micrometer, TSI has four options for you to consider. Our ‘supermicron-capable’ family of instruments includes optical and aerodynamic techniques for measuring particles in this size range. Whether you need real-time mass measurements, user-customizable size binning, or a size range that spans both below and above a micrometer, TSI has a sizing solution for you.
-
product
Engine Exhaust Particle Sizer
3090
The Engine Exhaust Particle Sizer 3090 (EEPS™) spectrometer measures the size distribution of engine-exhaust particle emissions in the range from 5.6 to 560 nm with the fastest time resolution available. Users can visualize and study the dynamic behavior of particle emissions that occur during transient test cycles, during the first few seconds of a cold start, or during regeneration of a particle trap or diesel particulate filter (DPF).
-
product
Particle Size Analyzers
Particle systems can be complex, but measuring them doesn’t have to be! Anton Paar offers two different technologies to characterize particles from the nanometer to the millimeter range. The Litesizer series employs light-scattering technology to determine not only particle size, but also zeta potential, transmittance, molecular mass, and the refractive index of nano- and microparticles in liquid dispersions. The PSA series uses laser diffraction technology to measure the size of particles in both liquid dispersions and dry powders in the micro and millimeter range. Side by side they open up a wide range of possibilities for comprehensive particle characterization.
-
product
Shadow Sizing
The Shadow Sizer measures size, shape and velocity of particles using backlighting and image analysis software based on the shadowgraphy technique.The Shadow Sizer can measure a wide range of particles types including bubbles, liquid droplets, solid particles and any object with a well-defined contour.Data is analyzed by DynamicStudio and includes histograms of size distribution, 2.5D spatial distribution plots, cumulative histograms and tables.
-
product
Solid Density Analyzers
The solid density analyzers from Anton Paar are tried and tested solutions. The Autotap and Dual Autotap tapped density analyzers conform to a wide range of international standards for the determination of bulk density. The Ultrapyc automatic gas pycnometers are ultra-simple to use and provide ultra-precise skeletal density or true density measurements of your solid materials. The Micro Rotary Riffler ensures representative sampling of the samples typically used for particle size, mercury intrusion, and gas sorption experiments from the larger amounts delivered to your lab.
-
product
Laser Scattering Particle Size Distribution Analyzer
Partica mini LA-350
HORIBA's new LA-350 Laser Diffraction Particle Size Distribution Analyzer is the ideal combination of performance, price, and packaging. The LA-350 excels in applications as diverse as slurries, minerals, and paper chemistry. Based on the advanced optical design of previous LA-series analyzers, the LA-350 strikes a harmonious balance between high-functionality, easy operation, low maintenance, and cost-effectiveness.Bench space is used efficiently due to the LA-350’s compact size (297 mm x 420 mm). The clever design and precision, high quality manufacturing ensure convenient, reliable operation and accurate results, now with a wider size range (0.1-1,000 µm).
-
product
Environmental Air Monitors
TSI’s environmental monitors measure size fractions of particles and ultrafine particles. They capture PM1, PM2.5, Respirable PM4, PM10, and Total PM.
-
product
Dispersion
Dispersions are often used in latex wall paints, which can thus be diluted with water. The homogenity of a dispersion depends on size and weight of particles. To determine the size of particles the use of a Fineness of Grind gauge or grindometer is needed. For proper mixing and / or stirring a variety of laboratory and industrial tools are available depending on volume or capacity.
-
product
Particle & Molecular Size/Charge Analyzers
Zetasizer Range
Instruments in the Zetasizer range are used to measure particle and molecular size from less than a nanometer to several microns using dynamic light scattering; zeta potential and electrophoretic mobility using electrophoretic light scattering; and molecular weight using static light scattering. The Zetasizer system is available in a range of variants, including the new Zetasizer Pro and Ultra. These two new systems offer unprecedented ease-of-use and flexibility, along with empowering user guidance and novel measurement techniques such as MADLS® and Particle Concentration.
-
product
Absolute Contamination Standards (ACS)
The Absolute Contamination Standard (ACS) is used to calibrate instruments which size and detect particles on the surface of bare silicon wafers. Use ACS to characterize particles, before particles characterize products.
-
product
NanoSilica Size Standards
MSP’s NanoSilica™ Size Standards are concentrated suspensions of amorphous SiO2 particles with highly uniform size distributions, suspended in ultra-pure water (UPW). NanoSilica Size Standards are available in 26 nominal sizes ranging from 15 to 200 nm, with size distributions narrower than commercially available PSL spheres. They’re provided in 5-mL quantities in dropper-tip bottles for convenience when mixing suspensions. All NanoSilica standards come with a Certificate of Calibration and Traceability and a Safety Data Sheet with handling and disposal instructions.
-
product
Fast Particle Sizer Spectrometers
To measure rapidly-evolving aerosols (such as engine or 3D printer emissions), you need a particle sizer that can keep up. TSI has several fast particle sizer spectrometers that are designed for such situations. Whether your application requires 1 Hz (or faster) size distributions, a soot-specific data inversion, or sample dilution, TSI has a fast sizing solution.
-
product
Particle Sensor
HPM Series
Honeywell Industrial Automation
The Honeywell HPM Series Particle Sensor is a laser-basedsensor which uses the light scattering method to detectand count particles in the concentration range of 0 g/m3to 1,000 g/m3 in a given environment. A laser light sourceilluminates a particle as it is pulled through the detectionchamber. As particles pass through the laser beam, the lightsource becomes obscured and is recorded on the photo orlight detector. The light is then analyzed and converted toan electrical signal providing particulate size and quantity tocalculate concentrations in real time. The Honeywell particlesensor provides information on the particle concentration forgiven particle concentration range.
-
product
NTA Particle Size Analyzers
NanoSight Range
The Malvern Panalytical NanoSight range of instruments utilizes Nanoparticle Tracking Analysis (NTA) to characterize nanoparticles from 10nm -2000nm* in solution. Each particle is individually but simultaneously analyzed by direct observation and measurement of diffusion events. This particle-by-particle methodology produces high resolution results for nanoparticle size distribution and concentration, while visual validation provides users with additional confidence in their data. Both particle size and concentration are measured, while a fluorescence mode provides differentiation of intrinsic or fluorescently labelled nanoparticles.
-
product
Spray Particle Size Analyzer
Spraytec
Malvern Panalytical's Spraytec laser diffraction system allows measurement of spray particle and spray droplet size distributions in real-time for more efficient product development of sprays and aerosols. It has been specifically designed to address the unique requirements for spray characterization and deliver robust, reproducible droplet size data.
-
product
Process Particle Size Analyzers
Insitec Range
Insitec systems deliver the online continuous particle size analysis needed for efficient, cost-effective monitoring and control of industrial processes. Suitable for the widest variety of process streams from dry powders to hot sticky slurries, sprays and emulsions, whether milligrams of material or hundreds of tonnes per hour. Insitec systems measure particles in the size range 0.1 micron to 2.5 mm.
