X-ray
Electromagnetic Spectrum whose radiation wavelength is 1 nm - 1pm and frequency (Hz) ranges between 10 to the 17th and 10 to the 20th power.
See Also: X-ray Systems
-
-
Product
X-Ray Detector
Cmosaix CMX4343
-
The technology used for the Cmosaix CMX4343 x-ray detector is based on a large array of CMOS cameras and sophisticated mathematical algorithms that produce superior X-ray imaging and enable new applications that were not possible before, at a fraction of the cost of existing technologies.
-
Product
X-ray Fluorescence Measuring system
FISCHERSCOPE® X-RAY 4000 Series
-
Inline measuring with maximum endurance. Robust inline device for measuring on solid strips, punched grids with measuring structures from a few millimeters up to coated membranes or solid strips up to one meter wide.
-
Product
Benchtop X-ray Diffractometer
Aeris
-
Meet Aeris – our brand-new benchtop X-ray diffractometer. Aeris will impress you with data quality and speed of data acquisition so far only seen on full-power systems. The instrument is accessible for everyone with its built-in touch screen and intuitive software. Being a Malvern Panalytical product guarantees delivery of the best benchtop data and full automatability for industrial applications. Aeris is designed for low cost of ownership and is available in 4 editions tailored to the needs of specific markets: the Cement, Minerals, Metals and Research editions.
-
Product
X-ray Inspection System
TruView Prime
-
The TruView Prime is a fully motorized radiography system developed to meet the stringent requirements of electronics assembly and component inspection. The TruView Prime is professionaly built - something hard to find in entry level systems in the TruView Prime's price range.
-
Product
X-ray Fluorescence Measuring System
FISCHERSCOPE X-RAY/XDV-SDD
-
Premium model for universal use for the inspection of very thin or complex layers up to RoHS screening at very low detection limits.
-
Product
X-ray Camera
-
Up until the introduction of SID-A50, X-ray inspection systems has been using detectors such as Image Intensifier (I.I.) and C-MOS Flat Panel Detectors, which needs to convert X-ray into optical light first, in order to visualize X-ray.These Indirect Conversion Method X-ray Detectors comes with multitude of issues. These problems include but not limited to; Low Sensitivity, Fuzziness, Time Degradation, Inadequate Life
-
Product
Benchtop X-ray Crystallography System
XtaLAB mini II
-
The Rigaku XtaLAB mini II, benchtop X-ray crystallography system, is a compact single crystal X-ray diffractometer designed to produce publication-quality 3D structures. The perfect addition to any synthetic chemistry laboratory, the XtaLAB mini II will enhance research productivity by offering affordable structure analysis capability without the necessity of relying on a departmental facility. With the XtaLAB mini II, you no longer have to wait in line to determine your structures. Instead your research group can rapidly analyze new compounds as they are synthesized in the lab.
-
Product
X-ray Fluorescence
-
XRF analysis – one of the best analytical techniques to perform elemental analysis in all kinds of samples, no matter if liquids, solids or loose powders must be analyzed.
-
Product
Dynamic X-Ray Detector
Shad-o-Box HS
-
The Shad-o-Box HS family of x-ray detectors are high-performance, high-resolution x-ray imaging devices designed for high speed digital radiography applications. Each model combines our x-ray sensor modules with appropriate readout electronics and a 14-bit digital interface for easy connection to a PC. The high-speed digital connection allows real-time imaging at frame rates up to 66 fps, while the state-of-the-art CMOS technology offers superb contrast, dynamic range, and resolution.
-
Product
Small-Angle X-Ray Scattering (SAXS) Products
-
Small-Angle X-Ray Scattering (SAXS) Products from Rigaku
-
Product
X-ray Microscopy
Xradia Family
-
✔ Characterize the properties and behaviors of your materials non-destructively.✔ Reveal details of microstructures in three dimensions (3D).✔ Develop and confirm models or visualize structural details.✔ Achieve high contrast and submicron resolution imaging even for relatively large samples.
-
Product
X5 Pipeline X-Ray Inspection
-
Designed to be integrated into the production line and available with product pipes in 2.5 and 3 ", the X5 pipeline is perfect for a wide range of pumped products such as poultry, meat, slurries and sauces. The system is capable of offering good detection levels on a wide range of contaminants including all metal, bone, glass, dense plastics.
-
Product
Real-time X-ray Inspection Systems
JewelBox Series
-
JewelBox x-ray inspection systems feature ultra-high resolution, powerful microfocus x-ray tubes, five-axis, and positioners. The JewelBox Series is divided into three broad categories: JewelBox 70-T, JewelBox 90-T and Ultra Compact each of which can be customized for specific applications.
-
Product
X-Ray Cameras
-
A range of scientific camera solutions optimized for high energy / X-Ray detection.
-
Product
Detachable X-Ray Detector
RadEye HR
-
The Remote RadEye HR x-ray detector is a slim, lightweight, rugged solution for high-resolution radiation imaging. The detector is suitable for industrial inspection applications where images are taken in tight or difficult-to-reach spaces.
-
Product
Energy Dispersive X-ray Fluorescence Spectrometer
EDX-LE
-
EDX-LE is an X-ray fluorescence spectrometer designed specifically for screening elements regulated by RoHS/ELV directives. The model uses a detector (Si-PIN semiconductor detector) that does not require liquid nitrogen, thereby achieving lower operation cost and easier maintenance. Automated analysis functions improve operability without sacrificing its high level of inspection reliability. The time required from start of measurement to judgment is as short as one minute for some samples, which is very helpful in screening inspections for elements regulated by the RoHS directive.
-
Product
TEL-X-Ometer X-ray System
-
X-ray experiments can include radiography, x-ray fluorescence, and x-ray diffraction. All can be performed with the TEL-X-Ometer, a compact x-ray source designed for student use. Take a look at the TEL-X-Ometer and accessories today.
-
Product
X-Ray Flaw Detectors
XXQ/XXG/XXGH Series
-
XXQ series are suitable for the material directional of thin iron plate, aluminum, rubber and so on, may get very good picture quality and clarity.
-
Product
X-ray Non-Destructive Testing (NDT) System
DynamIx HR / Series 5
-
High precision 12-bit 50µm reading allows inspection of minute image details. Wide dynamic range resulting in wide allowance of X-ray exposure value.
-
Product
X-ray Fluorescence Measuring System
FISCHERSCOPE X-RAY 5000
-
Inline measuring with highest precision for thin films. Robust XRF instrument for measuring and analyzing thin films and layer systems in the running process with connection to the production control system.
-
Product
X-Ray Inspection System
MXI Quadra 5
-
Quadra™ 5 is the X-ray inspection system of choice for sub micron applications such as PCB and semiconductor package inspection, counterfeit component screening and finished goods quality control.
-
Product
Pulsed X-ray technology
-
Golden Engineering X-ray generators are based on Pulsed X-ray technology. Pulsed X-rays generate a high intensity X-ray burst (pulse) in a very short period of time (10 to 50 nanoseconds depending on the model). The output dose of each pulse is 3-6 mR measured 12 inches from the front of the X-ray generator. The operator varies the overall dose of each exposure by changing the pulse setting. The pulse rate varies from 10 pulses per second to 25 pulses per second depending on the model. The generators can fire up to 200 pulses before a four-minute rest period.
-
Product
X-ray Inspection System
NEO-690Z / NEO-890Z
-
Off-line Microfocus X-ray Inspection System equipped with PONY ORIGINAL Direct Conversion X-ray Camera; SID-A50. Suitable for inspection of BGA, CSP, and LGA on PCB.
-
Product
3D X-ray hybrid inspection system
YSi-X
-
Ideal for 100% inspection of onboard automotive products and many other items by 3D X-rays acquire layered of target. X-ray, optical, infrared, and laser height measurement as standard equipment; hybrid and high reliability with multiple inspection modes.
-
Product
X-ray Analytical Microscope Super Large Chamber Model
XGT-9000SL
-
Large chamber capacity (W x D x H) : 1030 mm x 950 mm x 500 mm. X-ray shield complying with JAIMAS0101-2001/ IEC1010-1 to protect you from X-ray exposure. Mapping area size up to 350 x 350 mm2 <15 µm spot size with ultra-high intensity without compromising sensitivity and spatial resolution. Dual types of detectors for transmission and fluorescent X-rays. Detectable element range down to C with a light element detector and He purge module.
-
Product
X-ray fluorescence spectrometers
-
SPECTRO Analytical Instruments GmbH
SPECTRO is a world leader in the manufacture of energy dispersive X-ray fluorescence spectrometers. In recent years, SPECTRO has set standards by further developing X-ray fluorescence technology to create many new fields of operation for ED-XRF spectrometers.
-
Product
Benchtop Small Angle X-ray Scattering (SAXS) Instrument
NANOPIX mini
-
Non-destructive measurement of particle size and size distribution.Rigaku NANOPIX mini is the world’s first benchtop small angle X-ray scattering (SAXS) system that is engineered to deliver automatic nanoparticle size distribution analysis for both quality control (QC) and research and development (R&D) applications. Nanoparticle size, size distribution, and particle shape are the key pieces of information obtained from SAXS. Samples may range from solutions, suspensions or slurries to solid plastics, rubbers or polymers.
-
-
Product
X-Ray Line Camera
X-Scan C
-
Slim, plug-and-play-type, water-resistant X-ray line cameras for harsh industrial environments.
