Product

Non-Contact Voltage Tester

2AC

-

Fluke Corporation

2AC - Fluke Corporation

The Fluke 2AC is the latest addition to the VoltAlert™ AC non-contact voltage tester family. It is designed to be pocket-sized and easy to use. The tip of the pocket-sized tester will glow red when within close proximity of an outlet, terminal strip, or power cord where voltage is present. The 2 AC is always on, with a battery check function to make sure the tester is working properly.

Product

3 Phase Voltage Extension To Turns Ratio Meter Rack

T-REX R

-

Raytech AG

T-REX R - Raytech AG

The Raytech three phase voltage system option T-Rex R is an optional system accessory for 3- Phase transformer ratio meter test sets designed by Raytech (i.e. TR-MARK III R). T-Rex R was designed to give Engineers and Test Technicians the ability to test the phase relationships and actual voltage ratios of transformer windings while applying three phase voltage.

Product

HV High Voltage Detector

-

The Motwane Manufacturing Company

The Motwane Manufacturing Company

For decades, Motwane Voltage Detector has been a standard for international quality and safety ratings. Voltage detectors are used to signal the presence of voltage in a conductor since they make visible what we normally can’t see. Its application lies mainly in safety reasons during research, or when a service operation is under way. Most of the time, the monitored conductors come from low impedance sources whose voltage and energies are considered life-threatening.

Product

Standard Digital Multimeter - Auto Ranging

MM39

-

Martindale Electric Co. Ltd

MM39 - Martindale Electric Co. Ltd

The MM39 is an auto-ranging multimeter with a large rotary switch for easy selection of the required test, even when wearing gloves. There are two test buttons, one to lock the range and the other to hold the results which are displayed on a 3½ digit LCD screen.

The main test functions are AC voltage and DC voltage and current and resistance. The MM39 measures both AC and DC voltage between 0.1mV to 600V and AC and DC current between 10mA to 10A. There is a diode test and an audible continuity test which sounds at less than 25Ω.

Product

Incremental > Standard Encoders - Shaft

-

SCANCON

SCANCON

Incremental > Standard Encoders - Shaft

Product

Standard Helmholtz Coils

-

Magnetic Instrumentation Inc.

Magnetic Instrumentation Inc.

Helmholtz Coils are ideal for the measurement of Rare Earth (Samarium Cobalt, Neodymium) and Hard Ferrite permanent magnet materials (materials which exhibit a relative straight line demagnetization). Our standard Helmholtz Coils are for use with fluxmeters. The Helmholtz Coil measures the magnet sample as a single magnetic moment provided that the longest dimension of the magnet sample is less than one-third (1/3) the diameter of the coil system. By definition, the magnetic moment per unit volume is the intrinsic magnetization of the sample. With our calibrated Helmholtz Coil and Integrated Fluxmeter – and given the volume of the permanent magnet sample – the intrinsic open circuit operating B (Bdi) can be measured.

Product

Replacement Spade Terminals for High Voltage Differential Probe

PK-HVA-05

-

Teledyne LeCroy

PK-HVA-05 - Teledyne LeCroy

Replacement Spade Terminals for High Voltage Differential Probe

Product

FaithTech Ultra Low Voltage And High Current DC Load

NZ/N Series

-

Shenzhen FaithTech Technology Co., Ltd.

NZ/N Series - Shenzhen FaithTech Technology Co., Ltd.

Ultra low voltage and high current DC electronic load is a high reliability and high performance electronic load product derived from FT conventional electronic load for low voltage and high current test scenarios such as fuel cell test and CPU power supply device test. For different current levels, this product includes two series: NZ and N. The voltage is 0-20V or 40V, in which the NZ series can be loaded with 0V full current, and the N series can be loaded with ultra-low voltage and full current. The load capacity is up to 0V@1200A and 0.2V@5000A . This series of products has high precision and high cost performance, which is your good choice for testing.

Product

Compliance Voltage Ohmmeter

ΩhmRanger-LCV

-

AltoNovus Ltd

ΩhmRanger-LCV - AltoNovus Ltd

ΩhmRanger-LCV is an accurate, 3.5 Digit, Low Compliance Voltage Ohmmeter. It is able to measure from >100M to 10 Ohms, ΩhmRanger-LCV is suitable for professionals and enthusiasts alike.

Product

High Voltage Waveform Digitizer Family

PXD731x/PXD70xx

-

VX Instruments GmbH

PXD731x/PXD70xx - VX Instruments GmbH

The PXD731x High Voltage Waveform Digitizer family features up to two 100MS/s simultaneously sampled input channels with 16Bit resolution, input voltages up to ±250V and a bandwidth up to 50MHz. Every digitizer channel has its own 2MB memory which allows up to 1 million samples. Data can be acquired before and after the trigger event with a programmable sample counter, that controls the number of data points. All PXD731x High Voltage Waveform Digitizer family devices have a high common mode rejection ratio (CMRR).

Product

Safety Voltage Detector

289 SVD

-

Standard Electric Works Co., Ltd

289 SVD - Standard Electric Works Co., Ltd

● Bright LED visual indication● Audible indication● Mute function● AC voltage detection: 100Vac ~ 69kVac● Frequency range: 50/60Hz● Easy-to-prove method● Self-test function● Power source: 1.5V(AA) alkaline battery × 3● Non-contact detection by proximity● Personal sensor, easy to wear and convenient to use● Can be attached with hot sticks by optional accessory● Lightweight, robust and compact● Easy access to batteries Comply with EN 61326-1

Product

Clamp type AC Current Sensor／with DC Voltage Output

ACT-5H

-

MULTI MEASURING INSTRUMENTS Co., Ltd.

ACT-5H - MULTI MEASURING INSTRUMENTS Co., Ltd.

*For current measurements of the control board*AC 0.1A～5A*DC 5V full scale output

Product

CANbus Controller Standard Interface

PCI360

-

AcQ International

PCI360 - AcQ International

The PCI360 CANbus controller PCI card is based on the SJA1000. The SJA1000 provides an interface to the popular CANbus that support both standard (11-bit) and extended (29-bit) identifier messages. LEDs provide diagnostics information.The CAN network is a serial communication protocol which efficiency supports distributed real-time control with a high level of reliability.

Product

Third Rail Voltage Tester

4E2-1

-

TESCO

4E2-1 - TESCO

The Knopp 4E2-1 Voltage Tester is designed to detect electrical potential (voltage) between the third rail and ground on high voltage electrified transit systems. Two, redundant neon bulbs are used to indicate the presence of voltage. The prod handle and the tester housing are both made from moisture- and oil-resistant laminated phenolic. The prod tips are made from stainless steel. The tester housing includes a rubber hand guard to guide the operator in proper placement of his or her hand. There are no exposed metal parts other than to the two prod tips. All internal connections are soldered.

Product

Voltage Protection ICs

-

STMicroelectronics

STMicroelectronics

ST’s voltage protection devices prevent external overvoltage (or undervoltage) peaks from damaging circuitry.  They are commonly implemented on the power charging patch of portable devices to prevent USB or AC charger power failure.   ST’s devices offer the advantage of very precise voltage thresholds, so that the protection is activated accurately, and without fail.

Product

Non Contact Voltage Detection

-

Di-Log

Di-Log

Our range of Non Contact Voltage Detectors offer a safe and accurate method of checking for voltage present on a conductor. With audible and visual indication, our range offers total confidence when checking cables for live voltages