-
product
LIDAR & Direct Time of Flight
LIDAR (Light Detection and Ranging) is a sensor technology for remote object detection and ranging, using a light source and receiver. Emitted light pulses hit objects, reflect, and return to the LiDAR sensor system where the receiver detects the returning light pulse.
-
product
Conformal Coating Inspection System
TROI 8800 CI
The PEMTRON CI Series addresses the limitations of the area of theinspection due to the diversity of wavelengths of the existing UV,and performs a clearly separated area of coating onvarious wavelengths.
-
product
Real-time X-ray Inspection System
JewelBox 70T™
The JewelBox-70T delivers superior image quality with excellent resolution and sensitivity for laboratory and failure analysis applications. The system’s 10-micron MicroTech™ x-ray source provides magnification from 7X to 2000X, with resolution of 100 line pairs/mm.
-
product
Metrology & Inspection Systems
Our optical and e-beam wafer metrology and inspection products quickly and accurately measure pattern quality before and during high-volume chip manufacturing.
-
product
Tool, Inspection Depth Gauge, Mini Coax, Receiver
910121156
Used to verify the depth setting of the center conductor of receiver mini coax contacts.
-
product
Inspection of Glue Dot Assembly
ScanINSPECT's ADI
ScanINSPECT provides a simple and user-friendly alternative to inaccurate and time-consuming manual inspection methods or expensive, high-end AOI systems. ScanINSPECT uses a simple Windows user interface integrated with an automatic table and image-processing unit. This combination allows 100% inspection of adhesive placement on PCBs after dispensing.
-
product
Visual Visual Inspection Device
IP-3000
Our visual visual inspection device Inspection Pro IP-3000 is an inspection device that quickly and accurately inspects the mounting board, which is constantly evolving, and judge whether it is good or bad without omission.
-
product
Biofuels Testing and Inspection
Intertek delivers assurance, testing, inspection and certification services to refiners, producers, blenders, distributors, consumers and research institutes across the world.
-
product
Radiographic Inspection Test
The radiographic inspection is a non-destructive x-ray method for detecting internal physical defects in small component parts which are not otherwise visible. Radiographic techniques are intended to reveal such flaws as improper positioning of elements, voids in encapsulating or potting compounds, inhomogeneities in materials, presence of foreign materials, broken elements, etc.
-
product
Testing, Inspecting & Cleaning Kit
KI-TK033
850/1300 nm source & power meter, inspection microscope, cleaning materials. Interchangeable MPO, SC, LC connectors
-
-
product
Inspects MEMS and Wafer Level Devices
NorCom 2020-WL
The NorCom 2020-WL is specifically designed for wafer-level inspection and leak tests up to 1000 devices per cycle. The system can inspect up to an 8” wafer on or off a saw frame. It is designed to test MEMS and other wafer level devices that have a cavity.
-
product
High-Accuracy Automated Optical Inspection Systems
Fully-automated and high-accuracy 3D inspection and measurement systems. High-power, long working distance optics and high-resolution digital camera are perfect for high-magnification applications. These are full-color systems capable of high-accuracy measurements, automated defect detection and color verification.
-
product
Moisture Meters for Building Inspection
Delmhorst offers a wide variety of moisture meters for building materials that will guide your inspections with fast and accurate readings. A moisture meter is the only way to determine structural and safety risks such as mold, rot and decay that may be hidden behind walls, floors and ceilings.
-
product
Bulkflow X-Ray Inspection System
Designed to be integrated into line with optional reject stations, the Bulkflow X-ray System is perfect for loose and free flowing products. Offering a good detection levels on a wide range of contaminants including all metal, bone, glass and dense plastics.
-
product
Flight Control System Test Platform
The Flight Control System Test Platform provides a hardware in-the-loop (HIL) closed-loop test environment for dynamic and maintenance testing of Flight Control Systems (FCS) of both commercial and military aircraft. The system simulates control surface activities from multiple combinations of rudder, flaps, elevator, aileron, and engine controls to the FCS. The system delivers repeatable, cost-effective testing in a fraction of the time needed with typical in-house simulation test systems.
-
product
Can Inspection
Whether they are 14oz cans, 28oz cans, 12oz bottles, or some other size or format – they typically all look fine, as they fly by on your production line or sit on pallets ready to go out to customers. The challenge is, most companies have some kind of sealing issue at some point. Tops go on crooked, lids don’t seal, vacuums don’t set right – and it’s nearly impossible to tell by physical or visual inspection.
-
product
HS-1760 Flight Rated XMC Network Interface Controller
XMC-1760-NIC-CC
Avionics Interface Technologies
Dual Channel configurations supporting NC/NC, NC/NT, or NT/NT - 75 Ohm single ended copper or 150 Ohm differential - Eight (8) opto-isolated discrete I/O lines - Rear I/O through the P16 connector - Conduction-cooling and/or conformal coating available - x4 PCIe interface to NIC interfaces, with DMA controller for data movement - Designed for extended temperature operations - ANSI Application interface supporting C development - Device driver support: Windows, Linux, & VxWorks (others on request)
-
product
Electrical Inspection Adapters & Accessories
Electrical Inspection Adapters & Accessories by electro-PJP
-
product
Wide Range Film Inspection
790
For a wide range of coatings the easy-carry and easy to handle SPY Model 790 speeds inspection time with its built in Jeep meter and various other time saving and comfort features
-
product
Vision Inspection Products
Vision inspection systems use a series of high-speed cameras and imaging software to detect and measure random objects as they move along a conveyor belt. Custom software and measurement algorithms can determine the size, shape, color or composite measurement of any object and convert this into standard units for quality control. Bench, over-line, and in-line systems are available and provide real-time 100% inspection and rejection of any production line.
-
product
Matrix-Assisted Laser Desorption/Ionization Time-of-Flight Mass Spectrometer
MALDI-8020
The MALDI-8020 is the latest in a long line of MALDI-TOF products from Shimadzu. This benchtop, linear MALDI-TOF mass spectrometer delivers outstanding performance in a compact footprint, making it an ideal choice for today’s increasingly demanding laboratories.
-
product
Fixture and Software for Open/Leak Inspection
In addition to jigs and fixtures for probing conductors and electrode pads, NIDEC-READ provides specialized software for test point selection and log analysis.
-
product
Foreign Material Detection And Inspection
Cantrell•Gainco offers the latest high-performance inspection and detection solutions from the world’s proven performers – Anritsu and Fortress Technology – with whom we’re partnering to deliver the best inspection capabilities to poultry plants across the United States.
-
product
Inspection scope
KI-TK1012
Inspection scope & cleaning materials. Interchangeable MPO SC LC connectors
-
product
Leadframe Inspection Machine
IV-L200
The IV-L200 is a leadframe inspection machine ideal for measuring leadframe dimension and pitch. Aside from identifying leadframe warpage, it is also used to detect bent or skewed leads as well as surface defects such as scratch, ink, and contamination, among others.
-
product
Flight Test Switches
Curtiss-Wright Defense Solutions
Our compact, deterministic flight test switches have been qualified to reliably deliver high-speed, real-time data with a wide temperature operation ranging from -40 to 85°C. Their rapid boot-up capability minimizes data loss from power outages, while their flexible forwarding and filtering configurations can send what is required to multiple destinations for real-time monitoring, recording, and transmission.
-
product
Cargo and Vehicle Inspection
In a world where threats continue to evolve and concealment techniques become more sophisticated, our customers are facing more complex, difficult missions than ever.
-
product
Defect Inspection Systems
Candela® defect inspection systems detect and classify a wide range of critical defects on compound semiconductor substrates (GaN, GaAs, InP, sapphire, SiC, etc.) and hard disk drives, with high sensitivity at production throughputs.
-
product
X-Ray Inspection System
TruView™ Cube
The Perfect Solution for a Powerful Small Form Factor X-ray Inspection System. The all new TruView™ Cube X-Ray Inspection System is a fully motorized radiography system developed to meet the stringent requirements of electronics assembly and component inspection. Ideal for applications where space is premium, the the TruView™ Cube X-Ray sits comfortably on your laboratory bench.
