-
Product
Radio Frequency Probes (Automotive) HF77HFMf0112G540MSMPmF
1051503
-
The Radio Frequency Probes (Automotive) HF77HFMf0112G540MSMPmF are expertly designed coaxial probes, essential for effective automotive RF applications. These probes are engineered to operate efficiently across a range of temperatures from -45°C to +100°C and feature a pitch of 6.00 mm or 236 mil. With an impedance of 50 ohms and a frequency rating of 12 GHz, they provide reliable performance for a variety of automotive testing scenarios.
-
Product
NI-9237, 50 kS/s/channel, Bridge Analog Input, 4-Channel C Series Strain/Bridge Input Module
779521-01
Strain/Bridge Input Module
50 kS/s/channel, Bridge Analog Input, 4-Channel C Series Strain/Bridge Input Module - The NI‑9237 includes all the signal conditioning required to power and measure up to four bridge-based sensors simultaneously. The module provides strain or load measurements with zero interchannel phase delay. It also has 60 VDC isolation and 1,000 Vrms transient isolation, providing high‑common‑mode noise rejection and increased safety. You can program the NI‑9237 for use with half-bridge and full-bridge sensors with built-in excitation. The four RJ50 jacks provide direct connectivity to most torque or load cells and offer custom cable solutions with minimal tools.
-
Product
DC Isolating Transmitter
Model TW2D
-
Kusam Electrical Industries Limited
• 2 Inputs / 2 Outputs User Selectable• High Accuracy 0.1% RO at 23 °C ± 5 °C• Aux. Power AC 85 ~ 265V or DC 85 ~ 300V• PC Plastic Case, DIN Rail or Wall Mounting• High Dielectric Strength (AC 2KV/ Min, between Input/Output/Power)
-
Product
Needle Microprobe
MT-26/6HT
-
Fast-response 26 gauge needle probe, (needle length is 6 cm) for instant readings in tissue, semisolids, liquids. Also for very small specimens, powders and materials. Needle tip is sealed to ensure only stainless steel contacts specimen. Max. temp. 200°C. 5 ft. lead. Smallest microprobes give fastest reading. Short probes are easier to insert and last longer. Type #'s indicate needle gauge and needle length in cm.
-
Product
Single / Dual channel Dual Redundant DDC Controller
PCI-1553DDC-2
Controller
The PCI-1553-DDC-1/2 implements a complete single channel dual-redundant MIL-STD-1553 bus terminal on a half size PCI Card. Full BC/MT/RT modes are supported. 0°C to 70°C operating temperature is standard. Included is an DDC Enhanced ACE intelligent communications protocol engine, dual transceivers and encoder / decoders, shared memory, and management logic.
-
Product
Emulates AT89C5121 Derivatives with 6/12 Clocks/Cycle
FE-5121
-
* Emulates AT89C5121 Derivatives with 6/12 Clocks/Cycle * 16K Code Memory * Software Trace * Real-Time Emulation * Frequency up to 16MHz/ 3V, 5V * X1 and X2 Mode Support * MS-Windows Debugger for C and Assembler * Keil mVision2 Debugger Compatible * PLCC-52 and SSOP-24 Emulation Headers * Serially Linked to PC at 115Kbaud
-
Product
Development System
FE-C450
-
* Emulates Dallas Semiconductors DS89C450 * 62K Code Memory * Real-Time Emulation * Frequency up to fmax at 5V * Windows Debugger For C/C++ And Assembler * 44-PLCC Emulation Header * Target Board and Programmer Included * RS-232 or USB Interface * 64K C/ASM and 8K C++ Included
-
Product
Environmental Test Chambers
TTC/CTC
-
Rapid, precise and energy-saving temperature changes in the range from -42 C to +190 C, along with fast humidity recovery times, make the TTC temperature test chamber and the CTC climatic test chamber with humidity unit a perfect duo for controlled material testing, function tests, ageing tests or climate tests on composites, concrete, plastics or electronic components in material technology, the automotive and aerospace industries, and electronics.
-
Product
Switch Probes F87517B180G200
1003089
-
The F87517B180G200, identified by the SKU 1003089, is a high-performing Basic Contact Probe designed to meet various industrial switching needs. This switch probe operates in a normally open (NO) configuration, making it an ideal component for applications that require precise, reliable contact switching under a range of temperature conditions. With an operational temperature range of -45°C to +100°C, this probe is versatile enough for demanding environments.
-
Product
PMC Module
PMC-1553-TACEx
PMC Module
Operating temperatureCommercial: 0 to +70 °COptional: -40°C to +80°C• Airflow requirement: .5 CFM• Humidity: 5 to 90% (non-cond.)• Altitude: 0 to 20’000 ft
-
Product
Basic Contact Probes (100 Mil) F56212B190G100B
1001219
-
The Basic Contact Probes (100 mil) F56212B190G100B are designed for precision and reliability in various applications. With a robust construction featuring an 18K gold plated steel handle, these probes ensure excellent conductivity and durability. Engineered to operate within a temperature range of -45°C to +80°C, they are suitable for use in a variety of environments. The design includes a 100 mil pitch, making it ideal for high-density connectivity while maintaining performance integrity.
-
Product
Switch Probe F88517K230U080SM
1011420
-
The F88517K230U080SM is a high-performance switch probe categorized under the F885-NO family, designed for various applications requiring reliable electrical performance and precise measurements. This probe operates within a temperature range of -45°C to +100°C, making it suitable for extreme environments. Featuring a basic contact probe design, it has a pitch of 3.50 mm, ensuring broad compatibility with different systems. Its compact yet robust construction allows for a significant adaptable application in automating processes and measuring devices with a typical contact resistance of only 50 mOhm, ensuring minimal energy loss at the interface.
-
Product
Isolated DC Input/Output Module
ADAM-3014
Input/Output Module
1000 V DC , fully isolatedEasy input/output range configurationLow power consumption, 0.85 W (Voltage Output)Wide input/output rangeFlexible DIN-rail mountingOperates from single +24 VDCTemperature range 0 to 70°C
-
Product
F88503B080G200SM
1043636
-
The F88503B080G200SM Switch Probe, part of the F885-NO family, is designed to provide exceptional performance in applications requiring precision and reliability. This normally open (NO) switch probe operates effectively within a temperature range of -45°C to +100°C, making it suitable for use in various demanding environments. With a pitch of 3.50 mm (138 mils), the probe's design includes a basic contact configuration that ensures solid connections for a variety of electronics testing and validation tasks.
-
Product
Switch Probes (Normally Open (NO)) F87911B100G200
1017272
-
The Switch Probes (Normally open (NO)) F87911B100G200 is an essential component designed for high-performance applications that demand reliability and precision. With a temperature range of -45°C to +100°C, it caters to a variety of industrial requirements. The probe features a basic contact design optimized for quick response and accurate readings, ensuring consistent performance under diverse operating conditions. This particular model, falling under the F879-NO family, boasts a compact pitch of 2.54 mm, making it suitable for applications requiring tight spacing without compromising functionality.
-
Product
4-CH RTD Thermal Input EtherCAT Module
EPS-3504
-
ADLINK" s EPS slave system features modular design for flexible high channel density, rugged construction, easy maintenance, and intelligent performance, compatible with 3rd party EtherCAT products. Precise time-deterministic control enables I/O synchronization for critical applications, and FPGA and ARM technology allow users to fully monitor status of EPS modules and systems, including operating temperature and usage cycle of relay switching, as well as motion control status for general purpose motor drive control. In addition, the ADLINK EtherCAT configurator enables auto-scan and configuration across EtherCAT systems. The EPS" unique structural and electronic design supports hot-swappable function, reducing repair time, and the rugged construction and operating temperature range of -20°C to 60°C allow operation in the harshest environments.
-
Product
Basic Contact Probe F73316B180G150
1001596
-
The F73316B180G150 is a versatile and reliable basic contact probe designed for a wide range of applications. Its robust construction allows it to operate effectively in extreme temperature conditions ranging from -45°C to +100°C, providing stability and performance in demanding environments. The probe features a pitch of 4.00 mm, making it suitable for precision tasks. With a continuous current capacity of 10.00 A and a low typical contact resistance of 25.00 mOhm, this probe ensures efficient electrical connectivity and responsiveness during operation.
-
Product
High Current Probe HCF34009S350L540
1001372
-
The HCF34009S350L540 High Current Probe is engineered for precise battery contacting applications, offering robustness and reliability in demanding environments. With an operational temperature range from -45°C to +200°C, it effectively meets the performance requirements of various technical and industrial settings. This probe's design incorporates a basic contact probe with a pitch of 4.00 mm (157 mil), ensuring compatibility with a wide variety of devices. It is optimized for continuous operation with a maximum current of 16A, delivering consistency and dependability where it matters most.
-
Product
Pocket Sized Celsius Scale Dial Thermometer w/ 5 Inch Stem
TC100
-
UEi Test & Measurement Instruments
Celsius scale thermometer with a 1 inch dial and 5 inch stem with a -10˚ to 100˚C range
-
Product
Small Corrosion Test Electrochemical Cell – 30ml / 80ml
SCT-1
-
Small corrosion test electrochemical cell (8–80ml) with 2 electrode ports, borosilicate + PTFE body, and integrated graphite and Ag/AgCl electrodes. Temp range: RT–60°C.
-
Product
Push Back Probes (VF3) VF383B0002G15
1005896
-
The Push Back Probes (VF3) VF383B0002G15 is a high-precision contact probe designed for reliable performance in a variety of demanding environments. With a temperature range of -45°C to +100°C, this probe ensures that it can operate effectively under extreme conditions. Its robust construction features a beryllium copper plunger with gold plating, providing excellent conductivity and corrosion resistance. The brass barrel, also gold-plated, complements the design, ensuring durability and reliability during use.In terms of functionality, the VF3 probe boasts impressive specifications. The continuous current rating is 8.00 A with a typical contact resistance of just 30.00 mOhm, minimizing energy losses and enhancing efficiency. The mechanical specs of the probe include a preload of 300 cN and a spring force of 1500 cN, enabling the probe to maintain consistent contact under various pressures. With an impressive pointing accuracy of ±0.10 mm and a nominal travel of 5.00 mm, this probe is engineered for precision in measurement applications.
-
Product
Pogo Connectors (≤ 1,27mm / 50mil) P07011B045G030ML060HST
1029816
-
The Pogo Connectors (≤ 1.27mm / 50mil) P07011B045G030ML060HST, with Order Code 1029816, represents a highly versatile and reliable connection solution primarily designed for electronic applications requiring precision. These basic contact probes are built within the P-M / P070M-L060 family and are tailored to operate under extreme conditions, featuring a temperature range from -45°C to +200°C. The compact design ensures optimal performance, contributing to their reliability in both consumer and industrial electronics.
-
Product
Standard Precision GNSS Module
AIW-213
-
Half size mini-PCIe form factorStandard Precision GNSS L1 band92 Channels u-blox NEO-M9 engine (GPS, GLONASS, BeiDou, Galileo, QZSS and SBAS)USB 2.0 communication interfaceSupport Dead Reckoning (DR), Including IMU and Oscillator2 second TTFF for Hot Starts, Open sky code start 24 second.Accuracy 1.5M CEPOperating temperature: -40°C ~ +85°C / -40°F ~ 185°F
-
Product
DCDC
TA Series 25 Watt
-
The 25-Watt TA series operates over an ultra wide input range of 9-36 Vdc or 20-72 Vdc. Efficiencies of 77% are typical over varying load conditions of 25% to 100%. Additional features include input reverse polarity protection, remote on/off control, logic compatible with CMOS or open collector TTL, short circuit protection with auto restart, overvoltage protection, and an operating temperature range of -25°C to +71°C with no derating. Units are packaged in a six-sided continuous shielded case for EMI/RFI protection and measure 2.5” x 3.0” x 0.83”
-
Product
Radio Frequency Probes (Industrial) HF860SMAf018G990MCXfS
1038922
-
The Radio Frequency Probes (Industrial) HF860SMAf018G990MCXfS is designed for high-performance applications requiring precise measurement capabilities. With a pitch of 6.50 mm, this probe efficiently operates within a temperature range of -45°C to +100°C, ensuring reliability even in extreme conditions. Its superior electrical specifications, including a continuous current rating of 10 A and an impedance of 50 ohms at frequencies up to 8 GHz, makes it a vital tool for various industrial applications. The probe's construction utilizes premium materials such as gold-plated brass and beryllium copper for enhanced durability and conductivity, ensuring minimal signal loss and high accuracy during measurements.
-
Product
Step Probes (F720SP, F730SP) F73012B0005G110SP
1001133
-
The Step Probes (F720SP, F730SP) F73012B0005G110SP, designated by order code 1001133, are engineered for optimal performance in a variety of applications, ensuring precise measurement and functionality. These probes feature a unique design with a pitch of 1.27 mm, making them ideal for compact environments where space is at a premium. Operating within a temperature range of -45°C to +100°C, they are suitable for harsh conditions while maintaining reliability. The spring mechanism is designed to provide a preload of 55 cN and a spring force of 110 cN, offering excellent responsiveness and accuracy during use. With a nominal travel of 4 mm and a maximum travel of 5 mm, these probes deliver exacting precision, with a pointing accuracy of +/- 0.08 mm.
-
Product
ARINC 429 XMC Interface Module
XMC-429
-
Avionics Interface Technologies
16, 32, or 64 ARINC 429 channels (up to 32 Tx & 32 Rx) - Programmable Tx channel output amplitude - Programmable high/low speed operation - Eight (8) Discrete I/O (Four (4) inputs, and four (4) outputs) - Concurrent operation of all Tx/Rx Channels at high data rates - Full error injection and detection - Data capture filtering, 100% bus recording, and physical bus replay - IRIG‐B time code encoder/decoder for data correlation - Conduction-cooling and/or conformal coating available - Designed for extended temperature operations - ANSI Application interfaces supporting C, C++, C#, and .net development - Device driver support: Windows, Linux, and VxWorks (others provided upon request)
-
Product
Basic Contact Probes (100 Mil) F58806B150G200
1092096
-
The Basic Contact Probes (100 mil) F58806B150G200 are designed for precision and reliability in a variety of applications, with critical specifications that ensure optimal performance. These probes feature a pitch of 2.54 mm (100 mil) and can operate in extreme temperatures ranging from -45°C to +80°C, making them ideal for harsh environments. With a continuous current capacity of 5.00 A and a typical contact resistance of only 30.00 mOhm, the probes ensure efficient electrical connections while minimizing energy loss.
-
Product
Pico-ITX SBC With Intel® Pentium® Processor N4200 & Celeron® Processor N3350, HDMI/LVDS And LAN
PICO312
-
The PICO312 is a palm-sized fanless pico-ITX motherboard built with the latest 14 nm Intel® Pentium® processor N4200 or Celeron® processor N3350 (codename: Apollo Lake SoC). One 204-pin DDR3L-1867 SO-DIMM socket supports system memory up to 8GB. The tiny 2.5” pico-ITX embedded board features Intel® Gen9 graphics engine bringing a true high definition visual experience with dual display configurations through one LVDS and HDMI. In addition, it was designed for special needs of fanless operation under temperature from -20°C to +70°C. The PICO312 features a full-sized PCI Express Mini Card slot in support of mSATA and a pair of expansion connectors with additional signals including one PCIe x1 lane, one LPC, one DDI, four USB 3.0 ports, one SMBus and one HD audio, giving this SBC high expandability to meet all requirements.
-
Product
Vision System With LGA1151 Socket 7th/6th Gen Intel® Core™ I7/i5/i3 & Celeron®, Intel® Q170, 4 PoE, 4 USB 3.0, And Real-time Vision I/O
IPS962-512-PoE
-
The IPC962-512-PoE meets the increasing requirements for maximum quality and flexibility in modern production plants. It features flexible expansion capacity, camera communication interfaces, real-time vision-specific I/O with microsecond-scale and LED lighting control. This machine vision controller is powered by the LGA1151 socket 7th/6th generation Intel® Core™ (codename: Kaby Lake/Skylake) and Celeron® processors (up to 65W) with the Intel® Q170 chipset. The IPS962-512-PoE comes with a full range of isolated I/O interfaces and real-time controls essential to machine vision applications, including trigger input, LED lighting controller, camera trigger, as well as an encoder input for conveyor tracking. The real-time vision system PS962-512-PoE enables a fast and high accurate inspection to ensure that the desired quality is achieved with no manufacturing defects. It supports four IEEE802.3at PoE LAN ports and four USB 3.0 ports for connection with industrial cameras. Operating over a wide temperature range from -10°C to +55°C, the IPS962-512-PoE provides reliable and stable performance within severe environments. Its easy setup and compact design are ideal for space constrained environments. Moreover, one PCIe x16 and one PCIe x4 expansion slots allow quick installation of I/O cards and graphics cards. Two easy-swappable 2.5" HDDs are available for extensive storage needs.
