Product

Battery Test and Analysis System

BTAS-16

-

JFM Engineering

BTAS-16 - JFM Engineering

The task of testing an aircraft’s Nickel-Cadmium batteries is complicated and involved because of the high number of cell voltage readings that need to be taken during testing. Taking voltage readings from all 20 cells in the typical nickle-cadmium aviation battery multiple times is laborious and error prone, but must be done to properly estimate the condition of the battery under test.

Product

Low Voltage DC / Battery Powered HV Amplifiers

WMA-01 And WMA-01LF

-

Falco Systems

WMA-01 And WMA-01LF - Falco Systems

The Falco Systems WMA-01 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 3mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-01LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.1mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.

Product

Ethernet Flying Lead

-

Teledyne Marine ODI

Teledyne Marine ODI

​Qualified 100m Subsea Ethernet jumpers designed for data transmission and real-time situational awareness and monitoring. The typical Ethernet harness system consists of wet-mateable, Nautilus connectors, Nautilus penetrators, and pressure balanced, oil-filled (PBOF) hose conduits. Internally, the Ethernet signals are transmitted over custom Ethernet cabling sealed to seawater ingress by two independent barriers. Seven and 12-way configurations are available. Subsea connection of the harnesses may be accomplished by ROV, Diver-Mate or Stab-Plate applications. For Ethernet needs above 100 meters, see Extended Ethernet Flying Leads.

Product

Automatic Battery with Filters with Standard Contactors

BATLVF800

-

Lifasa - International Capacitors, SA

BATLVF800 - Lifasa - International Capacitors, SA

LIFASA automatic capacitor banks are used for centralized compensation ofpower factor in low voltage instalations

Product

5V50mA Coin Cell Battery Test Equipment

TOB-5V50mA

-

Xiamen Tob New Energy Technology Co., Ltd

TOB-5V50mA - Xiamen Tob New Energy Technology Co., Ltd

8 Channels Battery Test Equipment (0.1-50mA, up to 5V) For Lithium Coin Cell Battery Research. TOB-5V50mA Battery Test Equipment is an eight-channel battery analyzer to analyze small coin cells with a range current 0-50mah, voltage 0-5v. Each channel of the analyzer has independent constant-current and constant-voltage source, which can be programmed and controlled by computer software.

Product

Car Battery Checker

BT-300

-

Konstar Electric Industrial Co., Ltd

BT-300 - Konstar Electric Industrial Co., Ltd

Battery tester can test the car battery whether is ok, if the battery is bad or need charge or bad, the tester will give you the right check result, then can do the right plan for the battery before work.

Product

Automotive Battery Production Line Tester

-

Digatron Power Electronics

Digatron Power Electronics

The Production Line Tester (PLT) is typically installed at the end of battery production lines (finishing). An electrical load test after formation charging is essential to assure performance and quality. The energy discharged during this test must be minimized to eliminate the need for recharging after testing.

Product

Probe Ground Lead (22 cm)

PP005-GL22

-

Teledyne LeCroy

PP005-GL22 - Teledyne LeCroy

Probe Ground Lead (22 cm).

Product

Automatic Battery Testers

-

SPEA S.p.A.

SPEA S.p.A.

T100BT is an innovative, modular battery testing equipment able to combine, on a single test platform, all the tests required to detect any possible defect on battery cells and modules: from defective cell wiring, to geometrical or surface irregularities, to out-of-specs performances.The battery tester is designed for the high-volume production test of battery modules composed by prismatic, cylindrical, or pouch cells, as well in a Lab/NPI version for engineering, prototypes and low-volume battery testing. The complete configurability allows you to equip the tester with the modules and tools you need to test your products, reaching the desired throughput.

Product

Battery Test Equipment

-

KV Hipot Power Test Equipment Co.,Ltd

KV Hipot Power Test Equipment Co.,Ltd

Battery testers are the class of instruments designed to assess the condition—the charge, impedance, ripple current, or other measurement—of batteries to ensure they are working as required. Just as batteries have a very wide range of sizes and uses, so do battery testers.

Product

Y Lead Adapter for ZD Differential Probes Qty 1

PACC-ZD001

-

Teledyne LeCroy

PACC-ZD001 - Teledyne LeCroy

Y lead Adapter for ZD differential probes Qty 1

Product

Battery Safety Testers

-

Chroma Systems Solutions, Inc.

Chroma Systems Solutions, Inc.

The flexibility of our battery test equipment provides customers a test environment specifically for their application requirements.

Product

Battery Charger-Analyzer for small battery systems (up to 10A-Hr)

24-400xg

-

JFM Engineering

24-400xg - JFM Engineering

The 24-400XG is an instrument designed to charge, trickle charge and analyze (discharge) Nickel-Cadmium, Sealed Lead-Acid and other types of rechargeable batteries.With its multiple modes of operation of Constant Current Charge (dual and single rate), Constant Current & Float Charge, Constant Current & Peak Stop Charge, Automatic Discharge (analysis), Resistance Discharge (analysis) and Full Discharge (deep cycle), the 24-400XG can satisfy the requirements of most small (0 to 10 A-hr) rechargeable battery systems.The instrument features safety interlocks to protect the operator, the charger and the battery in the event of reversed polarity connection, short circuit, open circuit (no load) and Overvoltage conditions.Two large LED digital meters permit the simultaneous monitoring of voltage and current, while eight indicator lights inform of the status of the operation.

Product

Low Voltage DC / Battery Powered HV Amplifiers

WMA-02 And WMA-02LF

-

Falco Systems

WMA-02 And WMA-02LF - Falco Systems

The Falco Systems WMA-02 is a high voltage amplifier that runs from an 24 - 30V DC power supply and can be battery powered if required, e.g. for use in a Faraday cage. Its internal high voltage generator is inductor-free and hence does not spread magnetic interference in sensitive experimental setups. The output noise is impressively low at 4mVrms. For extremely low noise applications where bandwidth is not an issue, a dedicated WMA-02LF version is available that contains an output low pass filter capacitor which reduces the bandwidth to 50Hz, but makes the noise drop to below 0.2mVrms. This bandwidth-limited amplifier is ideal for MEMS or piezo positioning with manual voltage adjustment.

Product

Advanced Battery Tester

DBT-12+

-

DeltaTech Electronics

DBT-12+ - DeltaTech Electronics

The tester enables safe measurement of voltage, current rating, state of charge and state of health for 12V and 6V batteries. The device is powered by an internal battery, so it can test even discharged batteries and can be conveniently used as a voltmeter.

Product

Kelvin Test Leads

-

Parrot Invent

Parrot Invent

Kelvin Test Probes, Kelvin Test Leads, based on the Parrot™ Clip Invention provide  reliable contacts and connections for the Sense and for the Current  leads .