Waterproof Test Chambers
-
Product
Shock Test System
-
Labtone Test Equipment Co., LTD
Products are inevitably affected by impact, bump, free fall, tumbling etc. during production, transportation, loading and unloading as well as during the use of the products. All of these are transient excitation on the object, causing the object to produce mechanical characteristics of high speed, acceleration, strain rate instantly. These kind of characteristics are completely different from that in static load, and may cause problems to the object in terms of structural strength and stability and sometimes the object may fail. Therefore, it's necessary to study the effect of impact and reproduce the shock environment, to assess the structural strenghth and performance of the object under shock environment.
-
Product
Test System
ITC57300
-
The ITC57300 Dynamic Parametric Test System mainframe accepts Test Heads that perform nondestructive transient measurements on semiconductor devices such as Insulated Gate Bipolar Transistors (IGBT), power MOSFETs, diodes, and other bipolar devices(requires additional optional bias power supplies and custom personality boards). Included in the mainframe are all test equipment and software necessary to analyze and perform resistive and inductive switching time, switching losses, gate charge, Trr/Qrr, and other transient tests.
-
Product
Boundary-Scan Test Executive
ScanExpress Runner
-
Efficiency in engineering means managing your most precious resources: time and effort. Automated testing is essential and boundary-scan is a critical component; no other structural test system provides the same value.When down to the wire, your boundary-scan test system needs to be built both for ease-of-use and reliability; a robust and powerful mechanism to ensure that no matter the state of production, all boundary-scan tests can be quickly and faithfully executed to maintain forward momentum.
-
Product
Chloride Test System
C-CL-2000
-
The C-CL-2000 produces results on-site, within minutes that are accurate and comparable to expensive laboratory tests. It measures the electrochemical reaction of a weighted sample placed in an extraction liquid. It automatically shows a temperature compensated reading of percent of chlorides on its digital display. A wide range - from 0.002 to 2% chloride by weight - is covered.
-
-
Product
Geomembranes Testing Equipment
-
Similar to roofing membranes, geomembranes can be tested using our Wet Roof Pro' leak detector kit or one of our dry roof leak detector kits, such as the PD30R or PD40R.
-
Product
Avionics Test Solutions
-
IES Systems is a turnkey test systems solution provider with 10 years of proven experience in avionics test solutions. We provide final acceptance test equipment and environmental stress screening test equipment for the following programs.
-
Product
ELECTRICAL TEST Kit
1021 TK
-
Standard Electric Works Co., Ltd
2950 CL ● Pocket size.● 4000 counts.● Full automatic measurement : Voltage measurement. Current measurement. Resistor measurement.● Data hold function.● Continuity check.● Diode measurement.● Select function.● Low battery indication.● Auto off function.● Flashlight (auto off in 1 minute). ALS-2 ● Use with any clamp meter.● x10 mode allows for more accurate measurements of low amperage devices.● x1 mode allows for direct reading.● 4mm voltmeter input jacks.● Integrated ground conductor.● 10 amp capacity.● 10cm plug cord for greater flexibility.
-
Product
Radio Testing RED
-
dB Technology has been providing radio testing services for more than 30 years. With so many electronic devices now containing radio devices, it is critical that manufacturers are aware of their regulatory obligations, and our knowledgeable and experienced team is on hand to provide advice and guidance accordingly.
-
Product
E-mobility Test Systems
-
Correct contactingcharging cable detectionsecurity questionExtensive range of accessories for on-site measurements in a separate caseCharging cable with additional measuring lines (Sense)Convenient control through guided test procedure via WinSAM and tabletElectromechanical locking
-
Product
Vibration Testing System
F Series
-
Suited to durability tests for all industrial products such as aeronautical, automobile, electronic and precision equipment.
-
Product
Material Testing
-
With so many materials and applications in the world, you need to know that you can trust your products are durable and do what your engineers designed them to do. Manufacturers rely on results from hardness testing and international safety standards require materials to have a specific hardness or stiffness. Different metals need to be tested according to different hardness testing standards, whether it’s using a Rockwell, Brinell, Vickers or a Universal machine. Bowers Group have a variety of portable, bench and floor models in our product range to provide a solution for your hardness testing needs, whatever it may be.
-
Product
Wireless Test Solutions
-
Adivic/Chroma Group has been in the development of RF & Wireless test solutions for more than a decade. Take RF Recorder as an example, it has been adapted by all major Japanese & Korean automotive brand names such as Mitsubishi, Honda, Hyundai,.. ,most of the global IC design houses with DTV chips, and also military entities in NATO. With the same customer-proved Software Defined Radio architecture, we have introduced Wi-Fi, Bluetooth tester since 2014. It will soon cover other current/future wireless standards such as 4G/LTE, 802.11ax, 802.11ah, etc.
-
Product
Temperature Humidity Test Chamber
-
Dongguan Kejian Instrument Co., Ltd.
This equipment can simulate different environment condition. It's appropriate for testing material performance, such as resist heat, resist dry,resist humidity and resist cold. That can define performance of material.
-
Product
Remote Test Witnessing
-
DTB can test in a wide range of environmental factors while keeping staff and customers safe.
-
Product
Test Hardware
TTPSimulate XMC/PCIe
-
TTPSimulate is a high-performance test system which enables the simulation of a networked TTP system in real-time. It allows full hardware in the loop verification of a TTP unit. There are two form factors available for this product – PCIe and XMC card format. Both cards can act as four independent TTP nodes and have an IRIG-B interface for time-stamping.
-
Product
Distortion Test Sets
DTS-C
-
Matrix Test Equipment Incorporated
The Model DTS Distortion Test Sets combine Matrix products with those of other manufacturers. When properly equipped, a Model DTS can measure virtually any parameter important to the CATV industry. Controlled completely through the (GPIB) IEEE-488 bus interface, a Model DTS allows rapid, repetitive, and objective readings in a production-type environment.
-
Product
RF Diagnostic Chamber
DST200
-
The R&S®DST200 RF diagnostic chamber is the ideal environment for RF analysis during development. It supports a wide range of radiated test applications for wireless devices and fits on any R&D lab bench, where it can be used at all times during the product design and optimization phase. The R&S®DST200 effectively assists in achieving high first-time pass rates during final type approval, which saves time and money.
-
Product
Insulating Oil Testing
-
Insulating materials are the elixir of life of electrical equipment. These materials lose their insulating and cooling properties due to impuri ties and ageing. This damages equipment, causes failures and is consequently often accompanied by high costs. Precise and reliable measurement results.
-
Product
Chemical Testing
-
Our modern and comprehensive Chemical Laboratory has been certified and registered in accordance with the Environmental Laboratory Accreditation Program (ELAP) and by the State of California Department of Health Services.
-
Product
Testing & Measurements
-
Kiwa Dare performs measurements and tests in the area of CE marking, Automotive and FCC. The laboratory is specialized in EMC, RED and Product Safety tests for household, industrial, automotive, medical, telecom, maritime, railway, aerospace and military equipment.
-
Product
Environmental Test Chamber
-
Labtone Test Equipment Co., LTD
Environmental test system, Electro-dynamic Shaker, Shock Test Systems, Drop Tester, Bump Test Systems, Combined Environmental Test Systems
-
Product
Test Fixture Kit
322109
-
Each kit comes with enough supplies to run 5 tests and we offer all materials separately if you ever need more. These kits can be purchased by themselves, with a furnace or with a test stand. If you have any questions about these fixtures please contact one of our testing experts to get more information.
-
Product
Multi-Spectral Test Set
MSTS
-
The Multi-Spectral Test Set (MSTS™) is a two-color infrared (IR), ultra-violet (UV), and multi-band laser hand-held test set with an integrated detector. The MSTS provides an end-to-end flight line confidence test for directional infrared countermeasure (DIRCM), UV missile warning systems, IR missile warning systems, and multi-band laser warning systems. The MSTS is ruggedized, battery-operated, and can be hand-held or mounted on a tripod.
-
Product
X-ray Analytical Microscope Super Large Chamber Model
XGT-9000SL
-
Large chamber capacity (W x D x H) : 1030 mm x 950 mm x 500 mm. X-ray shield complying with JAIMAS0101-2001/ IEC1010-1 to protect you from X-ray exposure. Mapping area size up to 350 x 350 mm2 <15 µm spot size with ultra-high intensity without compromising sensitivity and spatial resolution. Dual types of detectors for transmission and fluorescent X-rays. Detectable element range down to C with a light element detector and He purge module.
-
Product
Micro Test Tubes
-
Shandong Drick Instruments Co., Ltd.
Length: 50mm, capacity is less than 0.8ml, apply WZZ-2S (2SS), SGW-1, SGW-2 and other automatic polarimeter
-
Product
Test Technology
GLP3
-
The GLP3-Windows®-testers are our premium testers to test a variety of different complex products. They are preferably used to test electric component groups, run-in test benches, power supplies, cables, washing machines and more and are ideally suited for complex test benches and inerlinkes assembly- and test lines.
-
Product
Refrigeration Training Chamber
-
The most effective way to help a student learn about refrigeration is through hands-on experience. Skill retention and efficiency improve when they are practiced and applied in a setting that simulates real work experience. In cooperation with a local vocational program, Thermotron developed the S4-T Refrigeration Chamber.
-
Product
Functional Testing Services
-
We manage an in-house team of testing specialists having sufficient experience to perform quality functional testing activities.ImpactQA exhibits cross-browser & cross-platform testing capabilities together with the latest interoperability testing methods to assess functionalities across multi-faceted systems.Unlike other functional testing services, our testing model is loaded with adaptable properties to perform white-box testing and functional testing of Java and .Net applications.
-
Product
Microbiology Testing Products
-
Bio-Rad microbiology products are a diverse array of: Culture media, rapid assays, biochemical tests, direct antigen detection, immunological serotyping, latex agglutination, and other tools for the recovery, growth, identification, and measure of microorganisms from clinical specimens.
