Product

High Speed Cameras

TETHERED HEAD SERIES

-

Photron Ltd.

TETHERED HEAD SERIES - Photron Ltd.

The FASTCAM Multi is a unique high-speed camera system featuring two compact and lightweight, sealed camera heads tethered to a remote processor. Benefiting from a high light sensitivity sensor delivering 1.3 megapixel resolution at 4,800fps, built-in data acquisition and options for long duration direct-to-SSD recording with the additional of the optional FASTDRIVE, the FASTCAM Multi is truly innovative.

Product

Linear Bench or Rack Mount Power Supplies Programmable, Local Control, Ultra Low Ripple/Noise

Series PAT

-

Kepco, Inc.

Series PAT - Kepco, Inc.

SERIES PAT are operationally programmable power modules that can be programmed to any level within their rated range and fully loaded at any output setting. These power supplies offer ultra low noise and ultra low ripple at the output and are MIL-STD-461 compliant.

Product

High Isolation Switches

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

High Isolation Switches by Pasternack

Product

High Voltage Measurement

-

ESDEMC Technology LLC

ESDEMC Technology LLC

High Voltage Pulse Attenuator is used to attenuate high voltage pulse signals in a 50 system. It is consist of highly surge robust components with great voltage linearity. The device is symmetrical, Input and output can be exchanged.

Product

High Current Discharge Testing System

DTV

-

Bitrode, Inc.

DTV - Bitrode, Inc.

Cold Crank Testing to industry standards: IEC, SAE, BCIDischarge capacity performance testing to thousands of amperes

Product

Ultra High Performance Multi-Sensor Camera System

FLIR M500

-

Teledyne FLIR

FLIR M500 - Teledyne FLIR

The gyro-stabilized FLIR M500 cooled thermal camera is our most technologically-advanced M-Series pan and tilt camera ever. Designed around a cryogenically-cooled 640 x 512 pixel Mid Wave Infrared (MWIR) thermal sensor, the FLIR M500 excels at both short and ultra-long range target detection and identification. It features a 14X continuous optical thermal zoom, a color HD camera with 30x zoom, an LED spot-beam, video tracking and radar integration.

Product

Ultra High 2.84 (81.00) - 10.00 (283.00) High Performance Lead Free Probe

LFRE-1H-10

-

ECT

LFRE-1H-10 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

High Sensitivity Vibrating Sample Magnetometer

VSM-P7

-

TOEI INDUSTRY CO, LTD.

VSM-P7 - TOEI INDUSTRY CO, LTD.

Quick response as well as high stability measurement in magnetization measurement sensitivity of approx. 2×10-6emu can be made possible. Small size and reasonable price upon VSM-5 series. Combination with option of gas-flow system of temperature variable unit is capable of making measurement at -50°C~200°C. Varieties of magnetic materials can be automatically measured with a plenty of software.

Product

High Mix High Component Count Or LED Panels

MC388

-

Manncorp

MC388 - Manncorp

The MC388 features four simultaneous heads with dual-vision alignment that can achieve placement rates of 10,500 CPH. When used as an inline machine, up to 192 Smart Feeder can be attached, providing a near-zero job changeover time. Plus, it has the huge placement area, high precision, and accuracy that users have come to expect from MC-series component placers. The MC388 is ideal for LED strips, drivers, or other large, high-component panels.

Product

High Flow Mass Flow Controllers

-

MKS Instruments

MKS Instruments

High flow thermal mass flow controllers and meters offer both elastomer and metal seals for flow rates up to 300 slm. Versions are available for standard and harsh environments where protection from water and dust is required.

Product

High Energy Shock Test System

KRD13 series

-

CME Technology Co. Ltd.

KRD13 series - CME Technology Co. Ltd.

KRD13 series high energy shock test system is specially designed to meet the requirements of military and automotive testing. The system adopts the principle of pneumatic energy storage expansion. By adjusting the inflation pressure, various high-level acceleration tests can be easily implemented in a short stroke.For the high-G classic shock test, it’s equipped with the corresponding shock amplifier to complete high-peak shock test.

Product

High Voltage Differential Probe

ADF25A

-

Link Instruments

ADF25A - Link Instruments

Permits conventional grounded oscilloscopes to be used for the display and measurement of multiple floating signals with high common mode voltages

Product

High Resolution Magnet Systems

EPR

-

Cryogenic Ltd.

EPR - Cryogenic Ltd.

EPR samples with S=1/2 electronic spins exhibiting a narrow signal at G=2 and require magnetic fields of only ca. 3.5 T. However, EPR spectra from S>1/2 spins are typically much broader and have spectral features that spread over magnetic field range of several Tesla.

Product

High Voltage Probe Meters

-

Shanghai Beha Electronics Co., Ltd.

Shanghai Beha Electronics Co., Ltd.

*High voltage test probe *is a high voltage probe that is used with Oscilloscope● Attenuation Ratio: 1000:1*Measuring range: AC 20KV/DC 30KV

Product

Raptor HV High Voltage Tester

-

EUROSMC, S.A.

EUROSMC, S.A.

The Raptor-HV, also called the high voltage slave, is an optional product that extends the Raptor’s applications to tests that require the use of a moderately high AC voltage.

Product

High Performance Geophone

SG-10

-

Sercel Group

SG-10 - Sercel Group

The SG-10 was developed utilizing rare-earth magnet technology to achieve very low distortion and the highest tilt tolerance in the industry.

Product

RFID High Temperature Products

-

Contrinex AG

Contrinex AG

Contrinex RFID High Temperature Products

Product

High Voltage Power Capacitors

-

Lifasa - International Capacitors, SA

Lifasa - International Capacitors, SA

Capacitors of correction power of cos φ and filtering of harmonics for AT of Lifasa, are manufactured under the base of the container / stainless steel box and porcelain terminals. There are two types, depending on the connection mode that we are going to use:*Single-phase (1 or 2 terminals) with internal fuses, for connection to the network through a double star. Recommended for networks of tension superior to 11 Kv or need of equipment of high power.*Three-phase (3 terminals) with internal fuses, for direct connection to three-phase network. Recommended for voltage networks lower than 11 Kv.

Product

High Speed High Mix Pick And Place

MC389

-

Manncorp

MC389 - Manncorp

The MC389 sets new standards for SMT pick and place speed, precision, and flexibility. Based on the MC Series’ durable ball-screw and rotary-encoded drive train, its three heads and on-the-fly vision allow accurate placement of any SMD (including 01005 chips, µBGAs, and 12-mil pitch QFPs). With an enormous placement area of 650 mm x 460 mm (25.6" x 18.1") and a capacity for up to 160 Smart Tape and Stick Feeders, the MC389 can easily be configured for virtually any high-mix project.

Product

High Voltage Meter

STME-VM

-

Statclean Technology (S) Pte Ltd

STME-VM - Statclean Technology (S) Pte Ltd

This is a High Input Impedance Voltmeter with 70 Gigohm input impedance. Capable of measuring up to DC voltage up to +/-5.5kV with 1.0V resolution over a range of himidity and temperature, the meter measures with better than 1% accuracy without loading the power source. Its compact size and light weight body allows applications in laboratory and field work when powered by battery.

Product

High Sensitivity Pressure Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

High sensitivity ICP® pressure sensors are for low pressure measurements requiring excellent resolution and small size. They are used to measure small dynamic hydraulic and pneumatic pressures such as turbulence, noise, sound, and pulsations, especially in adverse environments. They are capable of measuring high-intensity sound pressures from 111 to 210 dB at any static pressure level from full vacuum to 1,000 psi (6,895 kPa).

Product

High Temperature Accelerometer

HA602-A100

-

Semapi Corp

HA602-A100 - Semapi Corp

Charge Amplifier for use with CM362 High Temperature Accelerometers, Acceleration

Product

R.F. Coupler and high Pass Filter

7415-3

-

Solar Electronics Company

7415-3 - Solar Electronics Company

There are those who disagree with the r.f. conducted susceptibility test setup of Method CS02 of MIL-STD-462. Homemade rigs have sprouted to comply with the coupling capacitor requirement, each with it own disadvantage. Our little Type 7415-3 R.F. Coupler is the answer. A neat little box with BNC connectors and a pair of binding posts, it is rated at 270 V.A.C. at the LINE terminals and 20 volts PMS into the GEN port. Looks good and does a fine job.