Filter Results By:
Products
Applications
Manufacturers
Regression Test
tests the software changes, then that code affected by change and finally runs full suite of tests.
See Also: Regression Testing
-
product
Software Development
Test Gap Analytics
Too many unnecessary tests are developed and maintained, wasting valuable engineering resources. SeaLights minimizes test development by identifying areas where code was recently changed or executed in production, but has not been tested in any of your regression cycles. Managers and teams leveraging smart data can see exactly where gaps exist and plan where to develop new tests in the upcoming sprints.
-
product
Automated Testing for SAP
Autonomous Testing℠ for SAP
Designed for your SAP environment, Panaya Test Center is an integrated end-to-end testing platform, covering the entire functional testing spectrum including Unit Testing, System Integration Testing, Regression and UAT.
-
product
Real-time RF Channels Simulator
RF-LiveSim
Covering a frequency range from 50 to 900 MHz, RF Live Simulator can emulate RF channels propagation modes in real-time for a signal bandwidth from 20 kHz to 20 MHz (gaussian noise, multipath, Doppler and frequency drift tools). RF-LiveSim is a cost effective solution for intense automatic non regression tests at the physical layer level. RF-LiveSim includes 1x RF input and 1x RF output ports, and provides a complete set of channel models, either for fixed or mobile propagation environments. Whatever the standard, any type of receiver can be tested. Thanks to its real-time process, from your basic original signal, RF-LiveSim can perform, for instance, efficient regression testing of LTE solutions to check the good behavior and the limits of your receiver when multipathes, Doppler and Gaussian noise are applied.
-
product
Test System
BMS HIL
The BMS Hardware-in-the-Loop (HIL) Test System is a high performance platform providing all necessary input signals used for battery pack simulation. A real-time operating system executes complex cell and pack models commonly used for BMS algorithm development and firmware regression testing.
-
product
GUI Tester
Squish
Testing the user interface of today's applications is a very complex and error-prone task. Automating this task is challenging, but approached correctly very rewarding. Squish is the leading cross-platform/cross-technology GUI test automation tool for functional GUI regression tests. Many companies in all kinds of industries all over the world use Squish to drastically cut down the time spent on GUI testing software releases while increasing the quality of their applications.
-
product
Fluxmeter
DX-201
DX-201 digital fluxmeter is a precise magnetic measuring instrument, adopted low drift electronic integrator design and production. The most important features are test response quick, without data lose in the testing process. In the process of test samples flux by the Czochralski method, fast pull and slow pull datas are consistent, fine features especially shows in repeated measurements and regression testing. It can measure magnetic flux or magnetic moment matched with different fixtures according to users’ requirements.
-
product
Automated Regression Testing
TestingWhiz, a codeless automation testing tool facilitates fast, accurate, and flexible automation testing. The tool lets you automate regression testing for software, web, database, mobile, web services, and API by re-running automated tests in continuous integration.
-
product
Configurable Simulation Of ECU Diagnostics.
TestCUBE2
Softing Automotive Electronics GmbH
The ECU simulation TestCUBE2 is the counterpart for all cases of application in which an ECU is not yet (e.g. preparation of workshop tests) or no longer (e.g. tester regression test) available. TestCUBE2 is a configurable hardware and software solution for simulating ECU diagnostics with real bus communication. With just one device, you can simulate several ECUs or even an entire vehicle at the same time.
-
product
Fully Automated Web Testing
webmate
Cross-Browser Layout Testing - Cross-browser layout testing identifies parts of a web page that are not displayed the same across different browsers. Regression Layout Testing - regression layout test compares the visual appearance of two versions of a page within the same browserr. Live Testing with Browser Fleet - For debugging, access to live systems is indispensable. Browser Fleet is part of webmate and provides live access to virtual machines, directly in your browser (no plugin necessary).
-
product
Automated Regression Testing For BACnet
BOTS
BOTS is an easy-to-use BACnet regression testing tool for Windows. BOTS runs under Windows 7/8/10, and Server 2012. It provides a robust set of regression tests based on the 135.1 standard, including BTL additional tests and PolarSoft's own developer-oriented tests. BOTS includes many features tailored to the needs of QA Testers and product developers, at a price that's lower than competing systems that cost more than ten times as much.
-
product
Quality Assurance
Functional Test Code Coverage
Applications are developed with multiple builds each containing unique incremental code changes. In today’s reality of incremental code changes, especially functional, API and regression testing, CI/CD pipelines need simple Functional Test Code Coverage to enable visibility and quick feedback loops.
-
product
Audio Test Software
1. Distortion free stimulus even the equalized stimulus.2. Unlimited channels acquisition and processing. (Hardware limited)3. Human correlated listening test(Bark Scale intensity chart). (Requires large memory)4. Hi Res intensity chart for buzz/pop detection. (Requires large memory)5. Auto equalization method with target dBSPL accuracy.6. TCP client for test framework integration.7. Easy limits and logs development.8. Easy logs visualization module.9. Auto waveform alignment and triggering.(Upto single point alignment accuracy)10. Easy regression testing via TCP client.11. Standard Magnitude, Phase, THD, THD+N, Rubb&Buzz, Pink Noise, Noise Tests.12. Unlimited calibrations and equalization for scaling to different products and stations.13. Lowest test system and test sequence development times.14. Requires minimal training and debugging.15. Automatically avoid Reference speaker play and stop pops.16. WMD/ASIO driver compatible sound cards supported.(B&K 3670 recommended)
-
product
Java Testing Framework
TestNG
TestNG is a testing framework using annotations to provide a more powerful way to test your code in various ways: unit, regression, functional, integration, etc… TestNG allows you to clearly separate your Java code from the way your tests are run. You never need to recompile any of your classes if you decide to run a different set of tests or suites.
-
product
Test System
Tessy
TESSY automates the whole unit test cycle including regression testing for your embedded software in C/C++ on different target systems. As an easy-to-install and easy to operate testing tool TESSY guides you through the unit test workflow from the project setup through the test design and execution to the result analysis and reporting. TESSY takes additionally care of the complete test organization as well as the test management, including requirements, coverage measurement, and traceability.
-
product
ATE For Data Communications Equipment
• Developed for DRS Codem Systems, Inc. to test the CTM-IP product line of the Multi-Interface Protocol Converter.• Manufacturing Test support for the CTM-IP chassis and Interface Modules. Functional test of signaling, protocol and software configurations for various communication interface configurations.• Regression Test support for Engineering Product Development. Configurable test sequencing allows engineer to select specific tests for execution, with the ability to exercise all combinations of data rates and interface configurations.
-
product
Robotic Test Automation
Robotic Test Automation provides faster delivery of test execution, rather than getting bogged down in creation, execution, and maintenance of test scripts. RTA reinvents traditional application regression testing by removing the need for test script creation and maintenance. It eliminates the excessive cost, effort, and complexity of traditional testing methods, allowing you to significantly accelerate major projects and run a regression test before every application release.
-
product
Test Automation Services
Automating software products and applications at ImpactQA is performed with an aim to reduce regression testing time and time-to-market. Ouryears of experience and shining reputation among top automation testing companies have strengthened our engagement with global clients from different industry domains. ImpactQA and its test automation approach involve best in class tools for functional regression automation and webapplication automation testing partnered with creation & maintenance of automated test suites. Our true asset is the availability of IP-driven tools and custom test automation framework that permits cross-platform application testing for both web and mobile applications.
-
product
SAP Regression Testing Tool
Testimony
Testimony reinvents SAP regression testing with a transformative new approach: Robotic Test Automation (RTA). RTA eliminates the challenge and expense of traditional test automation and provides a highly efficient alternative to manual methods. Testing becomes truly automated, from creation of test assets to execution and maintenance, providing the confidence needed for more regular deployments, accelerated project delivery and faster time to value.
-
product
Functional, regression, load and integration Testing
Rational Test Workbench
BM Rational Test Workbench delivers end-to-end functional, regression, load, and integration testing to address the quality challenges of highly complex applications.
-
product
Programmable USB Hubs & Multiplexers
Acroname's unique line of programmable USB products help automated tedious USB port handling and monitoring tasks. Simplify and automate USB testing in manufacturing test, validation, regression or stress testing of your USB products.
-
product
Regression Testing Execution Factory Services
Our QA Experts can take the burden off of your team by performing regular and consistent full regression tests. Our company works on your schedule.
-
product
ECU Simulator
PT-LabCar
PT-LABCAR is an open and scalable Hardware-in-the-Loop (HiL) system. It is designed for open- and closed-loop testing of ECUs specifically in the powertrain application domain. The system can be used to run automated regression tests for the release of software variants as well as for the validation of control and diagnostic functions in early phases of ECU development.
-
product
EFT Module for Teststand
The Electronics Functional Test (EFT) Module for TestStand provides out-of-the-box tools to speed up development of automated tests for electronic assemblies including PCBAs, subassemblies and final assemblies. Test engineers can develop, deploy and execute test sequences quickly and efficiently with minimal custom code development for a shorter time-to-solution.
-
product
VXI Digital Multiplier
4152A
The 4152A’s advanced features like limit testing, averaging, speed/resolution trade-offs, and fast function changes provide the high “test system” throughput required in today’s production test environments.
-
product
6TL23 Off-Line seat operation Base Test Platform w/o Table
H71002301
- 18U height 19inch rack space (580mm depth)- VPC G12 or G12X interface- Man Machine interface H73000301 (not included)- stand-up operation
-
product
6TL08 Benchtop Test Platform
H710008
The 6TL-08 base platform was designed to cover the most common testing and in-system programming (ISP) needs with a reduced initial budget. The system includes a robust manual linear push mechanism allowing a low-cost fixture strategy thanks to the exchangeable cassettesThe platform enclosure features an 8-Slot fixture receiver, compatible with VPC 90 Series Mass Interconnect Module, as well as 6TL intelligent YAVModules (YAV90MMU &YAV90059), with room for fast ISP devices, optional PXI chassis and various power supplies. A removable back panel allows easy placement of custom connectors or test auxiliary circuitry.
-
product
6TL60 Rotary Test Handler
H79006010
6TL60 has been designed according to the 6TL philosophy, following the concepts of flexibility, modularity and scalability, and with the aim of improving production efficiency as well as increase production capacity and reduce costs.The 6TL60 is the best production solution to automate test processes to reduce the cycle time and the footprint used in the manufacturing plan
-
product
Laser Diode Reliability Burn-In / Life-Test System
58602
Chroma 58602 is a high density, precision multi source measurement Unit (SMU) module with temperature control and exchangeable interface developed for burn-in, reliability and life test of optoelectronic components including laser diodes, VCSELs, VCSEL Arrays, silicon Photonics, photo-diodes and other similar components.
-
product
EV Power Components End of Line Test Platform
Test and Validate all EV Power Electronics with One Flexible and Scalable Solution
-
product
ESD Test System
58154 Series
ESD (Electrostatic Discharge) Test Systems are PXI/PCI controlled module to simulate electrostatic discharge pulse during electronic device testing. The 58154 series offer both ESD STM5.1-2001-Human Body Model and ESD STM5.2-1999-Machine Model. The user friendly software offers programmable and flexible features, such as sampling test on a wafer, ESD model, ESD pulse polarity, ESD pulse interval in a sequence, and automatic testing function.
