Impulse Current
-
Product
Through Hole Type AC Current Sensor
CTA-120A
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*For AC current and power measurements.*High accuracy and compact size.*Wide measuring range:AC 1A～120A.
-
Product
DC BIAS CURRENT UNIT
3265B SERIES
-
To evaluate components at currents up to 125 A the 3265B DC Bias Units are used with either the Wayne Kerr 3255B series of Inductance Analyzers or the 3260B Precision Magnetics Analyzer. When one 3265B/25A or 3265BQ/25A DC Bias Unit is connected to an instrument up to 25 A of DC bias current can be set in steps of 25 mA with one unit. Additional DC Bias Units can be added such that with five units connected in parallel it is possible to set DC bias currents up to a maximum of 125 A DC.
-
Product
PXI Analog Output / Current Loop Simulators
-
These modules are aimed at simulating industrial control transceivers, utilizing 4–20mA current loops. The modules include built-in relays for shorts and opens functionality enabling fault insertion testing on every channel and also enable slew rates to be programmed so that different sensors can be effectively mimicked.
-
Product
Through Hole type DC Current Sensor／for DC Leakage Current Measurements
DCZCT-20M
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*DC earth fault measurement for solar power system*Least affection from the magnetization of core and temperature fluctuation*DC leakage current measurements*Current measurements for small DC motor*Convenient ＋5V single polarity power supply
-
Product
150 A, 10 MHz Current Probe - AC/DC, 150 A rms, 500 A Peak Pulse, 2 meter cable
CP150B
-
Teledyne LeCroy current probes are available in a variety of models for a wide range of applications. The full range of Teledyne LeCroy current probes includes models with bandwidths up to 100 MHz, peak currents up to 700 A and sensitivities to 1 mA/div. Teledyne LeCroy current probes are often used in applications such as the design and test of switching power supplies, motor drives, electric vehicles, and uninterruptible power supplies.
-
Product
PXI/PXIe Battery Simulator Module, 6-Channel, Simplified Current Sink, 750 V Isolation
41-752A-901
Battery Simulator
Targeting EV, automotive, aerospace, energy storage and electric aircraft applications, the new battery simulator modules occupy a single PXI slot. These 6-channel battery simulators are capable of supplying up to 7 V and 300 mA per channel. The channels are fully isolated from ground and from each other, allowing series connection to simulate batteries in a stacked architecture.
-
Product
High Current Probes (Battery Contacting) HCF34005S350N260
1003520
-
The High Current Probes (Battery Contacting) HCF34005S350N260 is engineered for superior reliability and high-performance in demanding applications. Capable of handling a continuous current of 16A, this probe not only ensures robust connectivity but also maintains a typical contact resistance of only 10 mOhm, making it an ideal choice for precision tasks. The design features a basic contact probe with an operational temperature range from -45°C to +200°C, ensuring it can perform under extreme conditions without compromising on performance.
-
-
Product
Clamp type AC Current Sensor／for Load Current Measurements(CT Series)
CT-23
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*Compact size*AC 1A～200A*Current measurements of terminal feeder
-
Product
Current Mirrors
-
Analog Devices current mirrors are precision, high dynamic range, wide variable supply parts used for optical power monitoring, voltage biasing with current monitoring, and voltage-to-current conversion. Our current mirrors can monitor current down to as little as 3 nA and as much as 3 mA, with a linearity of 1% or better. The current dynamic range is 120 dB or 6 decades of current range, while the overcurrent protection feature in our devices forces the input pin to ground to avoid part damage. Over temperature (–40°C to +85°C) and process, the dynamic range only suffers 10 dB at the lower end of the range.
-
Product
High Current Probes (Battery Contacting) HCF73211B100G300A
1165607
-
The High Current Probes (Battery Contacting) HCF73211B100G300A, designated with order code 1165607, is engineered for precision and reliability in various demanding applications. This basic contact probe features exceptional specifications that make it suitable for environments with extreme temperature fluctuations of -45°C to +200°C. Designed with a pitch of 2.54mm (100 mil), the HCF732 model ensures optimal performance in electronic devices where high current is critical. The continuous current rating of 20A coupled with a remarkably low typical contact resistance of just 10mOhm ensures minimal energy loss and stable electrical performance, making it an ideal choice for battery contacting applications.
-
Product
High Current Probe Receptacle H725LARD
1031263
-
H725LARD (item number 1031263) is a receptacle for the compatible High Current Probe and defines its installed position in the test fixture. As a Receptacle, H725LARD guides and positions the matching Contact Probe; depending on the design, the Receptacle can also provide electrical connection or insulation and supports controlled probe replacement during maintenance. When selecting H725LARD, the matching probe family, installation dimensions and any required connection or insulation design should be considered together.
-
Product
Current Sensing
-
voltage-output, current-sensing amplifier family that integrates an internal shunt resistor to enable high-accuracy current measurements at common-mode voltages that can vary from 0 V to 36 V, independent of the supply voltage. The device is a bidirectional, low- or high-side current-shunt monitor that allows an external reference to be used to measure current flowing in both directions through the internal current-sensing resistor sensor. The integration of the precision current-sensing resistor provides calibration equivalent measurement accuracy with ultra-low temperature drift performance and ensures an optimized Kelvin layout for the sensing resistor is always obtained.
-
Product
Low Input Bias Current Amplifiers (<100 pA)
-
Low input bias current op amps are required whenever the difference of currents or voltage is small and needs to be measured accurately. These op amps are used so that the signal is not loaded down by the input of the op amps. Low input bias current op amps are critical for interfacing sensors in applications from photodiodes, pH meters, or other electrometer related functions to downstream electronics. Analog Devices has many precision op amps that fit the definition and range of these applications.
-
Product
Primary Current Injection Set
-
It is widely used in industries for instrument transformer and switchgear testing.
-
Product
DC High Current And Power Resistance Standards
-
Specialized high-accuracy electrical metrology equipment designed to measure, source, and calibrate high direct current (DC) and power levels with extreme precision and low uncertainty.
-
Product
High Current Probe HCF73206B250G300A
1165581
-
The High Current Probes (Battery Contacting) HCF73206B250G300A is engineered for precision and reliability, making it an ideal choice for advanced battery connectivity applications. This basic contact probe features a unique design characterized by a pitch of 2.54 mm and can operate effectively in temperatures ranging from -45°C to +200°C. The robust construction ensures that it can handle continuous currents of up to 20 A with a typical contact resistance as low as 10 mOhm, providing reliable electrical performance in critical applications.
-
Product
High Current Connectors
-
Panasonic Industrial Devices Sales Company of America
Panasonic’s offering includes various High Current Board-to-Board Connectors suitable for applications that require a connection to a power source/battery. These High Current Connectors have low mated height profiles, high reliability, and are manufactured with Panasonic's Tough Contact technology.
-
Product
AC/DC Current Clamp Meter
CM100
-
Small jaw: 1.2"(W) x 0.53" (D) (300x13.4mm). Clamp opens up to 1/2 inch (12.5 mm). One rotary switch operation. Large 4 digit LCD display. AC/DC Voltage measurement up to 600 Volt. AC/DC current measurement from 0.001 up to 100 A. Relative measurement. One touch auto zero
-
Product
SolarIV Series Solar Cell Current Voltage Measurement System
SlarIV
-
SolarIV IntroductionOne of the key measurements needed for photovoltaic devices in the measurement of their I-V characteristics. Through measuring the I-V curves the user can determine physical performances of devices such as photo-electric conversion efficiency, fill factors and so on. Such data is important for reliable work in research and quality inspection. ZOLIX supply the SolarIV system and the most perfect, professional technical support.
-
Product
AC/DC Current Probe (1-Channel), 3 MHz, 50 UA
N2821A
Battery Probe
As modern battery-powered devices and integrated circuits become more green and energy efficient, there is a growing need to make high-sensitivity, low-level current measurements to ensure the current consumption of these devices is in acceptable limits. The N2821A high-sensitivity probe is engineered to make high-dynamic-range, high-sensitivity measurements to meet today’s challenging current measurement needs.
-
Product
High Current Probes (Plug Connectors) HCE08FA52S28E200
1040337
-
The High Current Probes (Plug Connectors) HCE08FA52S28E200 is a cutting-edge contact probe designed to handle extreme conditions. With its impressive temperature range of -45°C to +200°C, this probe ensures reliability and precision even under harsh environments. It features a basic contact probe design with a pitch of 16.5 mm, making it suitable for a variety of applications where high electrical performance is paramount. The probe's robust engineering is illustrated in its ability to sustain a continuous current of 200 A, alongside a typical contact resistance of just 1.00 mOhm, ensuring minimal power loss and enhanced efficiency.
-
Product
Ultrafast Photodetector with Current Monitor, 700 - 870 nm, DC - 25 GHz, FC/PC
DXM25CF
-
The DXM25CF Ultrafast Detector is a DC - 25 GHz, fiber-coupled, GaAs-based photodetector designed for applications in the 700 nm - 870 nm wavelength range. The core element of the detector is the fiber-coupled, hermetically sealed, microwave detector module. For convenience and simplicity of use, the module is mounted inside a rugged housing that includes a rechargeable battery, current monitor circuitry, and a digital display of the DC photocurrent.
-
Product
Split type AC Current Transformer
CTS-100
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
*1A output for metering application.*Short circuit switch for secondary output is provided for safe operation.*High accurate transformer for the application of first class meter.*Easy installation by metal fitting.
-
Product
Clamp type AC Current Sensor／for Leakage Current Measurements(ZCT Series)
HFCT-34
-
MULTI MEASURING INSTRUMENTS Co., Ltd.
Clamp type AC Current Sensor／for Leakage Current Measurements(ZCT Series)
-
Product
Split Core Hall Effect DC Current Sensor
CYHCT-C2TV
-
ChenYang Technologies GmbH & Co. KG
This Hall Effect current sensor is based on open loop principle and designed with a split core and a high galvanic isolation between primary conductor and secondary circuit. It can be used for measurement of DCcurrent etc. The output of the transducer reflects the real wave of the current carrying conductor.
-
Product
High Current Probes (Plug Connectors) H762RD
1009947
-
The High Current Probes (Plug Connectors) H762RD are designed for maximum efficiency and reliability in high current applications. With a pitch of 3.50 mm, these connectors ensure seamless connectivity while minimizing the risk of interference. The brass construction enhances durability, ensuring that the probes can withstand various environmental conditions without degradation in performance. This model features an internal thread of 2.5, further enhancing its adaptability for a variety of technical setups.
-
Product
High Current Probes (Battery Contacting) HCF77214B130G300A
1165649
-
The High Current Probes (Battery Contacting) HCF77214B130G300A is designed to meet the rigorous demands of modern electronic testing and battery interfacing applications. With a unique basic contact probe design, this product boasts an impressive operating temperature range from -45°C to +200°C, ensuring reliability in extreme conditions. It features a pitch of 2.54 mm, which makes it suitable for precise applications. The probe's construction is robust, utilizing high-grade materials to achieve durability and consistent performance.
-
Product
High Current Probes (Power Electronics) HCF73512A400U500
1019042
-
The High Current Probes (Power electronics) HCF73512A400U500 is engineered for precision and durability in demanding electronic applications. With a basic contact probe design and a small pitch of just 5.00 mm (197 mil), it is capable of operating across a wide temperature range from -45°C to +200°C, making it suitable for various environmental conditions. Designed for high performance, it can handle a continuous current of up to 50 A while maintaining a low typical contact resistance of only 5 mΩ. This ensures effective and reliable electrical connectivity in high-power scenarios.
-
Product
High Current Probes (Plug Connectors) HCF76289B310150400G300
1015093
-
The High Current Probes (Plug Connectors) HCF76289B310150400G300 are engineered for exceptional performance in various demanding applications. With a robust continuous current rating of 40 A and a temperature range of -45°C to +200°C, these probes ensure reliable connectivity even in extreme conditions. The probe's design includes a pitch of 4.00 mm and is crafted from high-quality materials, including a beryllium copper plunger with gold plating, making it durable and reliable for industrial use.
