Product

Hydrophone

RESON TC 4035

-

Teledyne Marine RESON B.V.

RESON TC 4035 - Teledyne Marine RESON B.V.

​The TC4035 is a miniature probe hydrophone specifi cally designed as a standard reference hydrophone for sound measurements in the frequency range 100 to 500kHz. The hydrophone incorporates a 10dB low-noise preamplifier, which includes an insert calibration circuit for convenient electrical testing of the hydrophone condition. The pre-amp has a drive capability for cable length up to 25 meters.

Product

Meter w/ pH Electrode, Conductivity/ATC Probe, Integral Electrode Holder

PC 700

-

Eutech Instruments

PC 700 - Eutech Instruments

The multi-parameter Eutech PC 700 measures pH, ORP, conductivity and temperature with a single meter. User-friendly with advanced features and a large custom-size display – perfect for research work on a budget!

Product

6 Sided Bed of Nails Testers

BoxProber Family

-

Test Electronics

BoxProber Family - Test Electronics

6 sided Bed of Nails circuit board test fixture. Probes top bottom and all 4 sides. Central camming mechanism pull plates inward. Mechanically or electrically actuated options. Designed primarily for testing products in plastics. Side access electrically probes outside panel connectors. The unit will also optically read LEDs and key segments off LCD displays. Solenoids will press buttons and servos will turn selector switches. DC motors are used to adjust multiple turn potentiometers. Microphone will detect audio output tones. Top and bottom of circuit boards can also be probed if removable access panels are available. This unit will also probe all 6 sides of a circuit board. This is typically utilized in applications where connector testing is required.

Product

CUSTOM Sensors

-

Lion Precision

Lion Precision

Over half of our orders are customized. Custom systems include simple calibrated range changes, vacuum compatability, mechanical probe changes, unique driver electronics, unusual calibrations, and completely new designs for inclusion in OEM products.

Product

Radiometric Probe for UVB Irradiance

LPUVB03BLAV

-

Senseca

LPUVB03BLAV - Senseca

The LPUVB03BLAV probe measures global irradiance (W/m²) on a surface area (m²) in the UVB (280 nm…315 nm) spectral region. In particular, the spectral sensitivity is focused at 305 nm, with a bandwidth (FWHM) of 5 nm. The global irradiance is the result of the sum of direct solar irradiance and of diffused irradiance incident on a planar surface.

Product

Probes & Test Leads

-

Di-Log

Di-Log

The Di-LOG range to test leads are designed and manufactured to the highest quality and meet all safety standard as stipulated in BS EN 61010

Product

Elevated 1.68 (48.00) - 7.00 (198.00) High Performance Lead Free Probe

LFRE-1I35-7

-

ECT

LFRE-1I35-7 - ECT

Current Rating (Amps): 6Average Probe Resistance (mOhm): 10Test Center (mil): 75Test Center (mm): 1.91Full Travel (mil): 250Full Travel (mm): 6.35Recommended Travel (mil): 167Recommended Travel (mm): 4.24Mechanical Life (no of cycles): 500,000Mechanical Life Remark: *Ultra High force products may observe slight decrease in cycle life.Overall Length (mil): 1,300Overall Length (mm): 33.02

Product

Flexible Current Sensor Probe

CTA

-

Powertek LLC

CTA - Powertek LLC

The CTA current sensors convert ac current to an isolated 0-5A current with available ranges from 100A to 10,000A. Because the current sensors are flexible split core, installation is possible without shutting down the LV electrical supply, avoiding expensive down-time costs. Typical applications are retrospective energy monitoring in factories, offices buildings, process control data logging systems, where power, energy and current monitoring is important. Typical applications are factories, offices buildings, ac/dc VFD drives, welding, power conversion and power distribution. For all CTA current sensor models, a NIST/NPL (UKAS) traceable calibration certificate and certificate of conformance is supplied. All CTA sensors use UL94V0 or CSA approved materials. The CTA flexible current sensors are suited to permanent or semi permanent installation. The coil sensor is durable, lightweight, flexible and will easily clip-around a power cable. The 5A output from the CTA current sensor connects direct to installed metering, rotary metering or current transducers.

Product

Scanning Kelvin Probe Microscope

VS-SKP

-

Ametek Scientific Instruments

VS-SKP - Ametek Scientific Instruments

The Kelvin Probe experiment uses a nondestructive method to determine the relative work function difference between the probe and the sample. Work function describes the energy required to liberate an electron from the surface of a conductor; electrochemists often interpret this as the difference from an electrode’s Fermi Level, average energy of electrons, and that of vacuum.

Product

Dissolution Tester Accessories

-

Teledyne LABS

Teledyne LABS

Teledyne Hanson's diverse range of dissolution tester accessories significantly expands the functionality of their instruments, catering to various applications such as small volume testing, Chinese small volume testing, semisolids testing, and immersion cell usage per USP <1724>. The lineup includes:- Precision dissolution vessels- Vessel covers- Paddles (USP Apparatus 2)- Baskets (USP Apparatus 1)- Paddle over disk “transdermal sandwich (USP Apparatus 5)- Rotating cylinder (USP Apparatus 6) - Sampling probes- Small volume kits- Filter block kits- Humidity-sealed dosage-drop chambers- Stationary basket and cover

Product

O-E PROBE

-

OptCom Company, Ltd

OptCom Company, Ltd

O-E probe is the unit to convert optical signals to electrical signals. It can be connected to Oscilloscopes or data loggers via a BNC connector and monitor the conversion waveform. It can acquire the optical signal easily by just pointing the optical fiber probe at the light source. Recently, more and more light sources utilize optical modulation for next generation lighting such as LED. Acquiring the emission timing is required to measure the emission phenomenon of the light source. This O-E probe unit is the ideal tool for these tasks.

Product

Test Probes

-

Equip-Test Kft.

Equip-Test Kft.

Test Probes provide the vital link to transfer measurement signals as true and as undistorted as possible. Therefore these elements can be regarded as the heart of Test Fixtures – and for this very reason it is important for Equip-Test to offer high performance Test Probes with best quality and value, and thus ensure maximized ROI (Return of Investment) for our customers. Test Probes supplied by Equip-Test always provide the best-possible available solution for your contacting demands.

Product

Inputs Temperature Data Logger – Pt100

HD32.7

-

Senseca

HD32.7 - Senseca

The instrument HD32.7 is a robust 8 inputs data logger for Pt100 sensor temperature probes. The probes can be Pt100 with SICRAM module, direct 4-wire Pt100 or direct 2-wire Pt1000.

Product

Temperature Measurement Interments

-

Testo AG

Testo AG

Most everyone wants to know the temperature on a daily basis, so we rely on accurate thermometers to give us this information. Testo manufactures a fully comprehensive offering of temperature solutions employing different senory technologies among a full assortment of measuring devices, all supported with a great probe selection to fit nearly any application.

Product

Differential Probe

DP-100

-

PINTEK Electronics

DP-100 - PINTEK Electronics

*This is the first detachable design (patent for 15 years)*High frequency, big power using. Max. Measuring is 7000Vp-p.I*t is capable for any brand of digital and analog oscilloscopes.*Additional AC Adaptor.*16MΩ high input impedance.

Product

Trace Probe

-

Ashling Microsystems Ltd

Ashling Microsystems Ltd

Vitra-XS is Ashling’s Debug & Trace Probe for embedded development with support for multiple target architectures including RISC-V, Arm-Cortex, MIPS (P8700 & I8500) & Synopsys ARC-V & ARC powered systems. Vitra-XS works with Ashling’s RiscFree™ SDK for advanced embedded system debugging, tracing, profiling & analysis.

Product

Hydrophone

TC 4037

-

Teledyne Marine RESON B.V.

TC 4037 - Teledyne Marine RESON B.V.

Incorporating a 10dB low-noise preamplifier able to drive a 25-metre cable and a wide usable frequency range, the TC 4037 is a spherical probe hydrophone that’s ideal for measuring sounds in the 100 to 500kHz range.

Product

Penetration Probe

TP49AP.I

-

Senseca

TP49AP.I - Senseca

Penetration probe, Pt100 sensor. Range -70 +250 °C. Stem Ø 2.7 mm, length 150 mm. Cable length 2 meters. Aluminium handle.

Product

Adapter/Stainless Steel

WADP-QNMNF-01

-

Warison Technology inc

WADP-QNMNF-01 - Warison Technology inc

Warison provides wide range of wireless passive coaxial components, includes Adapters, Attenuators, Coaxial Cables Assemblies, DC Blocks, Filters, Isolators & Circulators, Probes & Terminations. With outstanding capability of development and design, Warison is able to custom the spec based on customer��s demand. All Warison��s products pass inspection and electronic performance test before shipping out. It is our principal to deliver the best solution to all our clients.

Product

Photonics Test Solutions

-

Chroma ATE Inc.

Chroma ATE Inc.

Chroma offers precision instruments such as laser drivers, photodetector monitoring, and temperature controllers. These lab class instruments are often intefrated into production solutions for wafer probe test, burn-in and device or module characterization with inspection, metrology, robotics, Industry 4.0 and more.