Product

Isolation Adapter

-

Blackhawk

Blackhawk

For harsh environments and motor control applications where debug tools may be exposed to high voltage or ground loop potentials, Blackhawk offers two product models of galvanic isolation.

Product

Vibration Isolation Mounts

Series 1206

-

Kinetic Systems, Inc.

Series 1206 - Kinetic Systems, Inc.

The Series 1206 VIBRAPLANE Isolation Mounts are ideal when designing or retrofitting sensitive equipment. They use the same isolation techniques as our workstations and platforms, and perform exceedingly well in new equipment or to retrofit existing applications that don’t fit the standard table or platform.

Product

High Isolation USB Switches

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

RF gain block amplifier from Pasternack is featured in our extensive in-stock RF amplifier selection. Our connectorized gain block RF amplifier uses SMA connectors. This SMA gain block amplifier has a minimum frequency of 500 MHz, a maximum frequency of 2 GHz and a typical gain of 17 dB.

Product

High Isolation Switches

-

Pasternack Enterprises, Inc.

Pasternack Enterprises, Inc.

High Isolation Switches by Pasternack

Product

High Voltage Isolation Test Systems

HT 9460 and 9464

-

HARRIS TUVEY

HT 9460 and 9464 - HARRIS TUVEY

Accurate and non-destructive production testing of ac Isolation Voltage and Partial Discharge.With over 450 systems installed worldwide the 946X series of test systems are the standard and system of choice used by the majority of semiconductor manufacturers that produce optically isolated devices.

Product

Isolation Power Panels for Healthcare Facilities

-

Bender Inc.

Bender Inc.

Standards such as NFPA 99 and CSA Z32 require isolated power systems in all areas deemed “wet procedure locations” in healthcare facilities. Isolated power systems offer an invaluable advantage - early detection of ground faults allows for critical systems to remain online in a single fault condition.Bender isolated power panels provide isolated power to electrical systems in operating rooms and other critical care areas. Utilizing the latest in technology, Bender equipment ensures that electrical ground faults are detected and located fast and automatically, in compliance with the latest standards and code requirements.

Product

2-Port CAN-Bus MIOe Module With Isolation Protection

MIOe-3680

-

Advantech Co. Ltd.

MIOe-3680 - Advantech Co. Ltd.

Operates two separate CAN networks at the same timeHigh speed transmission up to 1 Mbps16 MHz CAN controller frequencyOptical isolation protection of 2,500 VDC ensures system reliabilityI/O address automatically assigned by PCI PnPLED indicates Transmit/Receive status on each portWindows DLL library and examples includedSupports Windows CE5/CE6/XP/7 driver and utilitySupports Linux 2.4.xx / 2.6.xx; QNX 6.3x/6.4.x/6.5.x Intel x86 hardware platform2-Port CAN-Bus MIOe Module with Isolation ProtectionGet Quote

Product

Safe Isolation & Lockout Tagout

-

Di-Log

Di-Log

Our range of Safe Isolation Kits and and our NEW lockout devices for isolating circuit breakers, RCD's and MCCB's, enable you to work safely on installations, following the safe isolation procedure, without the risk of electric shock. All our devices and equipment are easy to use and all equipment is supplied with Lockout Tags to identify the device is locked and who to contact in the event of an emergency.

Product

TAP Signal Isolation Module

JT 2139

-

JTAG Technologies Inc.

JT 2139 - JTAG Technologies Inc.

The JT 2139 is a TAP signal isolation module designed for use in combinational test systems that utilise multiple instrument interfaces. To avoid parasitic capacitance effects and/or unwanted ground loops the JT 2139 can be used to completely galvanically isolate any JTAG Technologies boundary-scan controller from the remainder of the instrumentation system. JT 2139 isolators are a standard component of the JTAG Technologies ‘Symphony’ systems that integrate boundary-scan with In-Circuits Testers etc..

Product

RS422 Mode SI-module With Optical Isolation And RTS/CTS

MX422-PEP

-

TEAM SOLUTIONS, INC.

MX422-PEP - TEAM SOLUTIONS, INC.

RS422 mode SI-module with optical isolation and RTS/CTS

Product

Galvanic Isolation Amplifier

X005 Series

-

Positek Limited

X005 Series - Positek Limited

The X005 Galvanic Isolation Amplifier provides a regulated and resistively limited +5V dc power supply required by the sensors, it can be connected in three or five wire modes. Used in five wire mode positive and negative sense inputs enable the X005 to dynamically adjust the sensor supply thus ensuring the correct voltage across the sensor. Connected in this way the X005 can compensate for 15 conductor resistance. The sense terminals are linked internally so the end user can use the X005 in three wire or five wire mode without the need to fit or remove external links.

Product

Defect Isolation

-

Teseda Corporation

Teseda Corporation

*Traverse through the physical design to trace nets and vias down to the defect location*Utilizes industry standard LEF/DEF design files, scan-based test information, tester fail logs and diagnostic reports to determine and isolate the physical defect location*Enables the user to leverage their diagnostic experience to determine the root cause of the defect*Interactive layout viewer displays scan chains, mapped mismatches of scan cells, layers, nets and subnets with search capabilities(component, net, cell)*Physical XY coordinates are always displayed for components and nets to guide the user through the design to quickly identify suspect sites for FA using techniques like Emission, OBIRCH, LIVA, TIVA, or FIB

Product

JTAG Isolation Protection

-

Blackhawk

Blackhawk

Our line of JTAG isolators help protect your investment in computers, development boards, debug probes, and lab equipment. Each model connects easily between your target board and debug probe.

Product

4-port Serial Interface, Modular, With/without Optical Isolation, 3.3V/5V, With 9-pin Connectors

APCI-7500-3/4C

-

TEAM SOLUTIONS, INC.

APCI-7500-3/4C - TEAM SOLUTIONS, INC.

*This model has 4x 9-pin D-Sub male connectors on 2 brackets*RS232, RS422, RS485, 20 mA Current Loop*Modular structure through SI modules*With or without optical isolation*Mode configuration free for each port*128-byte FIFO-buffer, common interrupt*Transfer rate programmable up to 115,200 Baud*Option: up to 1 MBaud for RS485 and RS422*Automatic direction recognition for RS48*Mode: configurable RS232, RS422, RS485, 20 mA Current Loop (active, passive) with or without isolation (SI modules)

Product

Shunt Isolation Amplifier

-

Knick Elektronische Messgeräte GmbH & Co. KG.

Knick Elektronische Messgeräte GmbH & Co. KG.

Especially to accurately measure large DC currents via shunt resistors, ie for making isolated detection of mV voltage on shunts. Variants with calibrated range selection. Working voltage up to 3600 V AC / DC.

Product

8-Port Serial Interface, Modular, With/Without Optical Isolation, 3.3V/5V

APCI-7800-3

-

TEAM SOLUTIONS, INC.

APCI-7800-3 - TEAM SOLUTIONS, INC.

8-port serial interface, RS232, RS422, RS485, 20 mA CL, modular mounting

Product

Isolation Amplifier Digital Output

-

Renesas Electronics Corp.

Renesas Electronics Corp.

This coupler is an optically coupled isolation amplifier that uses an IC with a high-accuracy sigma-delta A/D converter and a GaAIAs light-emitting diode with high-speed response and high luminance efficiency on the input side, and an IC with a digital signal (MDAT, MCLK) output function on the output side. This coupler is designed specifically for high common mode transient immunity (CMTI) and high linearity (nonlinearity) applications, making it ideal for current sensing in motor drives.

Product

- RS-422 Opto Isolation Module

Model 8381

-

Telebyte, Inc.

Model 8381 - Telebyte, Inc.

FEATURES: Opto Isolation; Built-in Power Supply; 115.2 KBPS Data Rate; DIN Rail Mounted; Full Duplex; Programmable Terminations. The Model 8381 RS-422 Opto Isolator allows re-generating and extending the distance of RS-422 networks while maintaining optical isolation between the ports. Model 8381 allows for the extension of RS-422 links to a maximum limit of 3,300 feet or 1 km at any data rate up to 115 KBPS.

Product

Isolation Amplifiers

-

Knick Elektronische Messgeräte GmbH & Co. KG.

Knick Elektronische Messgeräte GmbH & Co. KG.

Unipolar and bipolar DC input signals 20 mV to 200 V and 0.1 mA to 100 mA calibrated range selection. Working voltage up to 1000 V AC / DC.

Product

Isolation Tester UIP

-

UNION INSTRUMENTS

UNION INSTRUMENTS

The devices of the UIP (Union Isolations Prüfer) isolation tester series are used to test the pore-free condition of corrosion protection coatings of pipes, vessels or plant system parts. The battery-powered device generates test voltages between 5 kV and 30 kV, which are applied to the grounded test object via test electrodes. The location of a defect is signalized by a spark-over with an additional audible warning.

Product

Current Loop 20 MA Constant Current SI-module With Optical Isolation

MXTTY

-

TEAM SOLUTIONS, INC.

MXTTY - TEAM SOLUTIONS, INC.

Current loop 20 mA constant current (active, passive) SI-module with optical isolation.

Product

Large Size RF Test Enclosure, ≥100 DB Isolation, 300 MHz - 18 GHz

dbSAFE MAX

-

DVTest Inc.

dbSAFE MAX - DVTest Inc.

Some applications require larger test environments. The dbSAFE MAX blends all the superior isolation characteristics of the standard dbSAFE DUO shielded box into a larger volume to guarantee you get better results.