Ham Radio
communication on 26 bands spaced from 1.8MHz to 275 GHz.by liscensed amateur operators (Hams). Also known as: Amateur Radio
See Also: Radio, Software Defined Radio, Radio Frequency, Mobile Radio, SWR Meters
-
Product
USRP-2974, 10 MHz to 6 GHz, x86 Processor, GPS-Disciplined OCXO, USRP Software Defined Radio Stand-Alone Device
785606-01
-
The USRP-2974 is built on the LabVIEW reconfigurable I/O (RIO) architecture with an onboard Intel Core i7 processor running the NI Linux Real-Time OS. The USRP-2974 is a USRP Software Defined Radio Stand-Alone Device, meaning that you can target the onboard processor with LabVIEW Communications System Design Suite to deterministically perform processing. The USRP-2974 is also equipped with a GPS-disciplined 10 MHz oven-controlled crystal oscillator (OCXO) Reference Clock. You can prototype a range of advanced research applications that include stand-alone LTE or 802.11 device emulation; Medium Access Control (MAC) algorithm development; multiple input, multiple output (MIMO); heterogeneous networks; LTE relaying; RF compressive sampling; spectrum sensing; cognitive radio; beamforming; and direction finding. The registered trademark Linux® is used pursuant to a sublicense from LMI, the exclusive licensee of Linus Torvalds, owner of the mark on a worldwide basis.
-
Product
Custom Radio Direction Finding Products
-
This assembly contains three sets of antennas, three RF summers, an antenna switch, a GPS and (optionally) a flux gate compass. The pod mounts to the roof with nylon straps, although it is recommended that it be bolted down for more permanent applications. Although this antenna is not stocked, we can provide them on relatively short notice. No minimums apply.
-
Product
Radio Frequency Probes (Industrial) HF860SMCm015G530MCXfP
1012585
-
The Radio Frequency Probes (Industrial) HF860SMCm015G530MCXfP is a precisely engineered coaxial probe designed to deliver optimal performance in high-frequency applications. With an operational temperature range of -45°C to +100°C, this probe is capable of enduring extreme environments while maintaining reliability. The design features a compact footprint, with a total length of 43 mm and a projection height of only 11.5 mm, making it an ideal choice for tight spaces in various industrial settings.
-
Product
5G NR FR1, FR2 Device Radio Conformance Test up to 50 GHz
N9040BP
-
The N9040BP bundle solution provides everything you need for 5G NR FR1 and FR2 device radio conformance test. Make measurements up to 50 GHz with a convenient hardware and software applications bundle.
-
Product
Radio Communication Tester
CMP200
-
The R&S®CMP200 is an IF tester that combines vector signal analyzer and ARB based generator functionality. The compact integrated solution can be customized with up to three R&S®CMPHEAD30 remote radio heads (RRH), for up/downconverting signals to 5G FR2 frequencies.
-
Product
Radio Communications & Signal Analysis
-
Finding the appropriate solution for your wireless communications needs is critical. At Morcom you will always be given a professional opinion and competitive pricing. We only carry the best brands and our proposals are always reviewed and approved by a professional communications engineer. So, whether your needs are for two-way radios, broadband wireless systems, or in-building wireless Morcom will give you the best solutions.
-
Product
Radios
-
Honeywell Aerospace Technologies
Honeywell communications and navigation radios are used in nearly every type of aircraft. As the aviation industry grows and our customer’ needs evolve to areas like Urban Air Mobility, you can count on Honeywell’s wide-ranging navigation and communications radios to meet your requirements.
-
Product
Radio Frequency Probes (Automotive) HF77MATEAXm0112G540MSMPmFV2
1116970
-
The Radio Frequency Probes (Automotive) HF77MATEAXm0112G540MSMPmFV2 are designed to offer high fidelity and reliability in automotive applications where precise measurements of electrical signals are crucial. Engineered with a coaxial probe design, these probes boast a pitch of 7.5 mm (295 mil), and a temperature range from -45°C to +100°C, ensuring their functionality in a wide variety of environments. The combination of advanced materials, including beryllium copper for the plunger and high-grade steel for the spring, enhances durability while maintaining exceptional electrical performance.
-
Product
Radio Frequency Probes (Industrial) HF860SMBf016G530MCXfS
1038930
-
The Radio Frequency Probes (Industrial) HF860SMBf016G530MCXfS are precision engineering components designed for high-performance applications in RF signal transmission. With a coaxial probe design, these probes ensure minimal signal loss and maximum reliability across a variety of industrial uses. The HF860 model features an exceptionally wide operational temperature range from -45°C to +100°C, making them suitable for demanding environments. Their robust construction includes a beryllium copper plunger and brass barrel, each plated with gold to enhance conductivity and resist corrosion, thus maintaining integrity over time.
-
Product
USRP-2945, 10 MHz to 6 GHz, 80 MHz Bandwidth, Reconfigurable USRP Software Defined Radio Device
785263-01
-
10 MHz to 6 GHz, 80 MHz Bandwidth, Reconfigurable USRP Software Defined Radio Device - The USRP-2945 provides an integrated hardware and software solution for rapidly prototyping high-performance wireless receiver systems. This software defined radio reconfigurable device is designed for over-the-air signal acquisition and analysis. It features a two-stage superheterodyne architecture with four independent receiver channels and shares local oscillators for phase-coherent operation. It also offers a Kintex-7 FPGA programmable with the LabVIEW FPGA Module. With these features, the USRP-2945 has the RF and processing performance for applications including spectrum monitoring, direction finding, signals intelligence, wideband recording, and radar prototyping.
-
Product
Radio Frequency Probe HF860PCBGGSGG014G960MCXfP
1033127
-
The HF860PCBGGSGG014G960MCXfP is a cutting-edge Radio Frequency Probe designed for optimal performance in consumer electronics testing. This probe features a precision coaxial design, ensuring reliable signal integrity and minimal signal loss, which makes it indispensable for PCB-GGSGG applications. With a total length of 44 mm and a unique tip style diameter of 4.0 mm, this probe is engineered for effective contact with circuit board components, offering both durability and high performance under varying conditions.
-
Product
Ettus USRP X410, 1 MHz to 7.2 GHz, 400 MHz Bandwidth, GPS-Disciplined OCXO, USRP Software Defined Radio Device
787272-01
-
The Ettus USRP X410 integrates hardware and software to help you prototype high-performance wireless systems and perform over-the-air signal generation and analysis. Additionally, the Ettus USRP X410 features a two-stage superheterodyne architecture with four independent transmitter and receiver channels. It also features a Xilinx Zynq Ultrascale+ RFSoC with programmable FPGA supporting the Open Source UHD tool flow as well as LabVIEW FPGA. With these features, the Ettus USRP X410 has the RF and processing performance for applications such as wireless communications prototyping, spectrum monitoring, and signals intelligence. The Ettus USRP X410 is equipped with a GPS-disciplined 10 MHz oven-controlled crystal oscillator (OCXO) Reference Clock, which improves frequency accuracy and synchronization.
-
Product
Vector Signal Transceiver-based Radio Solution (VRS)
ATS-3100 VRS
Vector Signal Transceiver
The ATS-3100 VRS, the newest member of the ATS-3100 PXI Integration Platform product family and fifth-generation radio test solution, is a single, consolidated platform for testing legacy, modern, and next-gen, software-defined radios for military, civil, and commercial users. Integrating the PXI Vector Signal Transceiver (VST) from National Instruments (NI), the platform enables faster test time with wider bandwidth (up to 1GHz) than any other radio test solution available today.
-
Product
Radio Frequency Probes (Automotive) HF860GT13m011G930MCXfS
1109014
-
The Radio Frequency Probes (Automotive) HF860GT13m011G930MCXfS is expertly designed for precision in automotive and electronic applications. This coaxial probe is engineered to operate reliably within a temperature range of -45°C to +100°C, making it suitable for various environments. With a compact pitch of 6.50 mm and the capability to handle a continuous current of up to 10 A, the HF860 provides robust electrical performance with an impedance of 50 ohms and a frequency range of up to 1 GHz. The cleverly constructed probe ensures optimal electrical connectivity while minimizing signal loss, allowing for clear and accurate transmission of radio frequencies.
-
Product
Radio Frequency Probes (Industrial) HF860RFm016G530MCXfP
1012588
-
The Radio Frequency Probes (Industrial) HF860RFm016G530MCXfP, with order code 1012588, are designed for precision measurements in high-frequency applications. Constructed with high-grade materials, these probes feature a nominal travel length of 4.00 mm with a maximum travel of 5.00 mm, ensuring reliable performance within temperature ranges from -45°C to +100°C. The coaxial design allows for minimal signal loss and a stable impedance of 50 ohms, making it suitable for laboratory environments as well as industrial settings.
-
Product
Tactical Radio Test Set
CTS-6100
-
The CTS-6100 brings an entire test bench to your front lines. Enable your technicians to detect equipment faults and verify operational capabilities at the I- and O-levels, saving valuable diagnostic time and cost.
-
Product
USRP-2901, Software Defined Radio Device Bundle
784114-01
-
USRP-2901 Software Defined Radio Device Bundle - The USRP-2901 Teaching Bundle includes two USRP (Universal Software Radio Peripheral) Software Defined Radio Devices, turnkey courseware, and other accessories such as USB 3.0 cables and SMA attenuators. Students can use USRP … Software Defined Radio Devices with LabVIEW to experiment with real-world signals in introductory communications and digital communications laboratories. The USRP-2901 Teaching Bundle helps students experiment with FM radio, GPS, GSM, Bluetooth, and ISM signals. The bundle also includes components of a lab station that students can use to gain hands-on experience with live communication links between multiple USRP Software Defined Radio Devices.
-
Product
Radio Frequency Probes (Automotive) HF77SMKMINIFAKRAm0412G2160MSMPmF
1134946
-
The Radio Frequency Probes (Automotive) HF77SMKMINIFAKRAm0412G2160MSMPmF, with order code 1134946, provide an essential solution for automotive RF testing applications. This precision-engineered coaxial probe features a compact design and robust construction, optimized for high-frequency measurements up to 12 GHz. The probe is capable of operating in extreme temperatures ranging from -45°C to +100°C, making it suitable for a wide range of automotive environments.
-
Product
Universal Panel, IR & Radio Receivers
-
Add more connections to your LocoNet system. UP5 Simplifies hook-up, maintenance & troubleshooting of LocoNet, add a few to make traditional tethered walk-around operation a snap.
-
Product
Radio Frequency Probes HF860MMCXf016G530MCXfP
1032011
-
Introducing the HF860MMCXf016G530MCXfP Radio Frequency Probe, designed for optimal performance in high-frequency applications. This coaxial probe boasts an impressive temperature range of -45°C to +100°C, ensuring reliability in various environments. With a sleek and robust design, the HF860 model features a 6.50 mm pitch, making it suitable for intricate and precise connections in consumer electronics. Its capabilities extend up to 6 GHz, making it a versatile tool for engineers and technicians alike.
-
Product
Radio Frequency Probe HF830SMBm015G520MCXfP
1043724
-
The HF830SMBm015G520MCXfP Radio Frequency Probe is a precision tool designed for extensive applications in electronic testing. Known for its robust build and versatile performance, this coaxial probe operates across a frequency range of up to 5 GHz, making it an essential component for professionals in the telecommunications and high-frequency domains. The probe maintains an impedance of 50 ohms and is capable of handling continuous currents of up to 10 amps, thus ensuring reliable data transmission even in demanding conditions. With a operating temperature range of -45°C to +100°C, it guarantees stability and functionality across various environments.
-
Product
Radio Frequency Probe HF860PCBCO016G530MCXfSV1
1038951
-
The HF860PCBCO016G530MCXfSV1 is a high-performance Radio Frequency Probe designed for precision applications in the consumer electronics sector. With an impressive frequency range of up to 6 GHz and a robust impedance of 50 ohms, this probe ensures reliable signal integrity, suitable for a wide array of testing and measurement scenarios. It is engineered to perform in a temperature range of -45°C to +100°C, making it versatile enough for both indoor and outdoor applications.
-
Product
Radio Frequency Probes (Industrial) HF890MMBXf-SMAf0112G910SMPmP
1042148
-
The Radio Frequency Probes (Industrial) HF890MMBXf-SMAf0112G910SMPmP is designed for high-performance applications, providing exceptional reliability and precision in environmental conditions ranging from -45°C to +100°C. Its innovative design features a pitch of 12.0 mm (472 mil) and incorporates both impedance and frequency ratings at 50 ohms and 12 GHz respectively, ensuring optimal signal integrity. This probe is particularly suited for demanding applications where electrical specifications, such as a continuous current rating of 10 A, are crucial for maintaining service stability.
-
Product
SPLIT MOUNT RADIO SYSTEM
CFIP PhoeniX C
-
CFIP PhoeniX C split mount system is designed to fit in a classic telecom architecture with a radio located outdoor and a sheltered indoor unit. CFIP PhoeniX C system has compact indoor unit that enables transition from TDM networks to hybrid TDM/IP networks providing up to 64E1, Gigabit Ethernet ports, or up to 16 ASI ports for transferring video signal. Total maximum capacity is up to 366 Mbps full duplex.
-
Product
Radio Frequency (RF) Testing
-
Comprehensive testing and certification services helping you ensure that your wireless or radio devices achieve compliance to international regulatory RF or immunity requirements.
-
Product
Radio Frequency Probe (Industrial) HF830SMAm014G500MCXfP
1133673
-
The Radio Frequency Probes (Industrial) HF830SMAm014G500MCXfP, with order code 1133673, is designed for precision measurements in testing and development environments. Engineered for a broad temperature range of -45°C to +100°C, this coaxial probe is essential for maintaining signal integrity in various applications. Its robust construction ensures longevity and reliability under rigorous conditions, thanks to materials such as beryllium copper and high-grade steel used in key components.
-
Product
Mixed-Signal Front Ends (MxFE) - Scalable Software-Defined Radio Solution with 7.5 GHz Bandwidth
-
The mixed-signal front end (MxFE®) provides today’s system designers working in communication infrastructure, instrumentation, and aerospace and defense with a scalable software-designed radio solution with a very wide 7.5 GHz bandwidth. This solves several complex challenges including increasing bandwidth demands and signal chain complexity as system operation moves from the RF to the mmWave spectrum domain and as bandwidth demands move from megahertz to gigahertz.
-
Product
Radio Frequency Probe HF819HSDf011G2020H819AEPP
1033153
-
The Radio Frequency Probes (Automotive) HF819HSDf011G2020H819AEPP, cataloged under order code 1033153, are essential tools designed for high precision in automotive applications. These coaxial probes feature a robust coaxial design, ensuring reliable performance even in challenging environments. With a temperature range of -45°C to +100°C, they tolerate extreme conditions while maintaining accuracy and efficiency. Their continuous current ratings of 10 A and 3 A ensure that they can handle various electrical demands, while a low typical contact resistance of just 1.00 mOhm guarantees minimal signal loss during measurements.
-
Product
Radio Frequency Probes (Industrial) HF860SMCm015G530MCXfS
1039106
-
The Radio Frequency Probes (Industrial) HF860SMCm015G530MCXfS is a highly specialized coaxial probe designed for advanced RF applications. With a generous operational temperature range from -45°C to +100°C, this probe is capable of delivering reliable performance in demanding industrial conditions. Its versatile design includes a pitch of 6.00 mm, making it suitable for a variety of setups, including precision testing and measurements. The probe also supports a continuous current of up to 10 A, with an impedance of 50 ohms, allowing it to function optimally at frequencies up to 5 GHz.
-
Product
Radio Conformance Analyzer
RCA G9200
-
LTE test solution for development, verification and conformance testing of LTE mobile equipment. The G9200 RCA is able to perform analysis of LTE mobile devices at all layers from the physical to the application layer, and is suitable for development, conformance, pre-conformance, and production test applications.
