Product

RF Shielded Test Enclosure

JRE 0709-P

-

JRE Test, LLC

JRE 0709-P - JRE Test, LLC

Containing all the capability of the larger JRE enclosures, the compact JRE 0709-P is ideal for small wireless devices such as; cell phones, pagers, WiFi dongles and other small RF devices. Featuring rugged welded aluminum construction, you can be assured of its tight RF shielding effectiveness. Long life door gasket material along with double edge engagement not only provides solid RF shielding, but smooth troublefree operation over its lifespan.

Product

Closed-Loop Motor Controller

MS320

-

Electro-Sensors, Inc.

MS320 - Electro-Sensors, Inc.

Master and Ratio-Follower modes and programmable input functions. Options include analog speed feedback input, analog setpoint inputs and relay outputs. Works with incremental shaft encoders and pulsefrequency output shaft speed sensors. Optional explosion proof enclosure or NEMA 4X enclosure kit.

Product

KMD540 Series and RDR2000/2100 Panel

TA-3C

-

Tech-Aid Products

TA-3C - Tech-Aid Products

The TA-3C test fixture is a combination of the KMD540 testing requirements and the RDR-2000/2100 weather radar interface requirements. This panel allows the technician to test the KMD540 MFD as a stand alone item (with external simulators) or together with a radar sensor for a dynamic real time test. The panel includes the required switching for sensor alignment and KMD testing along with input jacks for the required data inputs. Also built into the fixture is an analog gyro simulator for checking the stabilization functions of the sensor. The full enclosure comes in standard panel width.

Product

VARIABLE TRANSFORMER DC POWER

208163V

-

Carl E. Holmes Company

208163V - Carl E. Holmes Company

Motorized Variable Transformer Controlled Power Supply, P/N 208163VInput power: 208 VAC, 6 Amps, 3 PH, 60 HzOutput: 0 to 120 VDC, 16 Amps max.Ripple: 5%Manual control with variable transformerCircuit breaker / ON OFF on the 208 VAC, 3 PH input lineProtection fuse provided on the outputPOWER ON lightIndoor enclosure: 24H x 20W x 9DVoltmeter and ammeter are installed to monitor the output.All input/output connections are available inside the enclosureSystem includes main unit and remote assembly.

Product

9025TR - 25 Module Solution with Platform

-

Virginia Panel Corporation

Virginia Panel Corporation

The 9025TR has over twice the I/O as the G12 and is outfitted with the same 20-inch platform to support enclosures while engaging and disengaging. The front-mount ITA is user-friendly, allowing the enclosure or fixture to be fastened from the mating side. The docking feature of the 9025TR provides an easy way of guiding a fixture into position prior to engagement. Runners along the platform provide a smooth-sliding action, ideal when using fixtures up to 180 pounds. The 9025TR uses all standard modules and contacts, includes a microswitch and is available with optional table legs and keyboard tray kit.

Product

16 Slot VME64x 19" Rackmount Development Platform

12V16OPX98Y5VPE0

-

ELMA Electronic, Inc.

12V16OPX98Y5VPE0 - ELMA Electronic, Inc.

Elma's Type 12V System Platform family of enclosures for VITA architectures (VME, VME64X, VPX and VXS) provides a rugged, versatile platform. This configuration is based on a 16-slot VME64X backplane. Assembled and tested.

Product

RF Test Enclosure Ideal For Repeatable Testing, ≥90 DB Isolation, 300 MHz - 18 GHz

dbCHECK

-

DVTest Inc.

dbCHECK - DVTest Inc.

The dbCHECK is an ideal solution for repeatable wireless device testing. Boasting a dual RF gasket design, high quality broadband RF absorber, and filtered I/O panels, the dbCHECK shielded box can achieve more than 90 dB* isolation from 300 MHz to 18 GHz. This level of isolation delivers maximum performance by attenuating all unwanted signals.

Product

Leak Detect Stik Liquid Level Sensor

7100

-

AMETEK Drexelbrook

7100 - AMETEK Drexelbrook

The 7100 leak detect stik is a liquid level sensor that takes field proven magnetostrictive sensing technology and packages it in a revolutionary new way for greater reliability and for easy installation and mounting.The 7100 leak detect stik has PPM (Pulse Position Modulated) outputs for product and interface level and for temperature measurement, which are all superimposed on the two wire power line.All sensor electronics used in this liquid level sensor are SMT components integrated into the 5/8” diameter sensing tube. This breakthrough in package design eliminates the bulky electronics enclosure at the top of the sensor and offers you greater options for insertion.

Product

HiCAM Fluo

-

Lambert Instruments BV

Lambert Instruments BV

The HiCAM Fluo is a high-speed camera for fluorescence imaging applications. It records high resolution images at a frame rate of up to 2000 fps in the most challenging low-light conditions by using a cooled image intensifier. Packed into a compact aluminum enclosure, it is easy to attach the HiCAM Fluo to any fluorescence microscope.

Product

Microwave / RF Synthesizers, Test & Measurement

-

Berkeley Nucleonics Corporation

Berkeley Nucleonics Corporation

The 825-M is an agile ultra-low phase noise RF signal source from 8 kHz to 20 GHz RF Synthesizer. It is available in single-channel or multichannel configurations. A single channel 825-M is packaged in a compact enclosure, or can be ordered with a touch-screen display, or a 1U 19" rackmountable version. The multi-channel version (2, 3, or 4 channels) is packaged in a 19” 1U rackmount enclosure.

Product

Protector Conductor Test / Ground Continuity Test / Ground Bond Test

-

LXinstruments GmbH

LXinstruments GmbH

Testing the protective conductor is indispensable for assemblies, devices and systems of protection class I because it reduces the risk of life-threatening electrical accidents.The test checks whether the protective earth (PE) fulfils the criteria specified in the standards and can correctly discharge the current occurring in case of a fault.The ground continuity test checks whether the protective earth conductor is connected continuously to all metallic enclosure parts that can be touched by the user. The test can be carried out with low currents and voltages (simple continuity test).

Product

Network Emulation System

Mini Maxwell

-

InterWorking Labs, Inc.

Mini Maxwell - InterWorking Labs, Inc.

Mini Maxwell -- Easy to use, portable, network emulator. Mini Maxwell''''s low cost of $1995 can fit into any testing budget. The Mini Maxwell is great if you have low power requirements, or need ultra quiet operation. Mini Maxwell supports packet drop/loss, duplication, delay (latency)/jitter, reorder, and burst. Includes: processor, memory, and three Ethernet interfaces in one enclosure with separate power supply, Linux OS, Mini Maxwell network emulator engine, graphical user interface, and 90 Day Warranty.

Product

IEC60068-2-75 Spring Operated Impact Hammer

CX-T04

-

Shenzhen Chuangxin Instruments Co., Ltd.

CX-T04 - Shenzhen Chuangxin Instruments Co., Ltd.

This Spring Impact hammer is strictly designed according to IEC60068-2-75, IEC884 and UL1244 GB/T2423.55-2006, GB4706.1, GB8898 and GB7000 standards. It is used to test the mechanical integrity of product enclosures. After applying the impact with the hammer, the product is examined with accessibility probes to determine access to shock, energy, and injury hazards. Built in exact accordance to IEC\EN, \UL\CSA and other international Standards.

Product

Conductor Damage Test Set

CD-2M

-

Lumetronics

CD-2M - Lumetronics

Is designed to carry out tests specified for Switches used for Domestic and similar applications as included under IS:3854:1997. It is used to ensure that Screwtype terminals of switches are such that they clamp the conductor without causing undue damage to the conductor strands. It is a compact and robust andequipment housed in a bench top enclosure. The CD-2M is motorized to allow easy operation. The Instrument is designed to meet the requirements of IS:3854:1997 and other related specifications.

Product

VPX Chassis 10U/84HP 10 Slots

BKP6-CEN10-11.2.4-4

-

Kontron

BKP6-CEN10-11.2.4-4 - Kontron

This 10 slot Hartmann Open VPX BKP6-CEN10-11.2.4-4 profile system chassis provides a high performance packaging solution for 6U VPX modules as SBC’s, GPU’s FPGA boards. The 84HP wide, rack-mountable enclosure for vertical mounting of boards is outfitted with two 1000W plug-in VPX power supplies and a 3U bottom mount fan tray.

Product

Broadband Antenna

OBDR

-

DVTest Inc.

OBDR - DVTest Inc.

Broad frequency range, ideal for complementing RF test enclosures in various test setups

Product

Wall-Mount Miniaturized Oxygen Analyser

Rapidox 2100-OEM-RSB-WALL

-

Cambridge Sensotec Ltd

Rapidox 2100-OEM-RSB-WALL - Cambridge Sensotec Ltd

The Rapidox 2100 OEM-RSB-WALL is a wall mount version of our miniaturised 24V OEM oxygen (O2) analyser. The compact (4.5″ x 3.0″) circuit is integrated into a neat IP65 wall mount polycarbonate box, with a clear smoked hinged lid. Behind this is a clear OLED display and menu keypad. The box is completely electrically isolated and meets all UL and IEC standards for these types of enclosures.

Product

LED Driver (V4, V5, PWM, 18CH)

SLAMMO

-

Creative Lighting

SLAMMO - Creative Lighting

When it comes to LED control, bigger IS better and the SLAMMO boasts class-leading capacity of up to 25Amps, 600W @24VDC (up to 450W in IP67 enclosures) / 300W at 12VDC. For constant current LEDs, the SLAMMO P can drive up to 96 luminaires equipped with PWM controlled CC drivers such as the Meanwell LDD series (350mA to 1.6A per LDD)

Product

Point Source

RL Series

-

Eastern Acoustic Works

RL Series - Eastern Acoustic Works

From the very outset, Redline was designed for you, the live audio professional. From corporate events to festivals, every aspect of the design has been targeted at making your life easier. From enclosure handling and fitments to acoustical and electronic components, Redline is built to live as you do: with demanding clients, tight schedules and even tighter budgets.

Product

Cylindrical Inductive Proximity Sensor

GX-U/GX-FU/GX-N

-

Panasonic Industrial Devices Sales Company of America

GX-U/GX-FU/GX-N - Panasonic Industrial Devices Sales Company of America

These compact Cylindrical Inductive Proximity Sensors with built-in amplifier offer an improved sensing range that is 1.6 times longer than Panasonic's previous model [GX-12ML(B)] and can be mounted at a greater distance from the object. Having their enclosure and pigtail cable entirely coated with a fluorine resin makes them splatter-resistant so they can be safely used in applications prone to splatter.

Product

Benchtop/Portable Cable/Harness Wiring Test System

CKT1175-10

-

CK Technologies, Inc.

CKT1175-10 - CK Technologies, Inc.

Designed for wiring testing requirements requiring up to 2,000 test points, the CKT1175-10 is ideal as a benchtop or portable test system. The system is packaged in an enclosure specifically designed to be used in rugged environments. The basic 500 test point system is 20.5 in. (521 mm) wide X 12.0 in. (305 mm) high X 16.05 in. (408 mm) deep; the 500 test point expansion units are 20.5 in. (521 mm) wide X 6.00 in. (153 mm) high X 16.05 in. (408 mm) deep.

Product

CPCI Test Extender 6Ux180mm

117FFE6018-0XXX

-

ELMA Electronic, Inc.

117FFE6018-0XXX - ELMA Electronic, Inc.

The cPCI extender boards are designed to bring a circuit card completely out of a card cage or enclosure so that it can be tested or debugged on each 2mm HM connector in P1-P5. Each line in rows A-E can be isolated with the DIP switches.