cPCI Digitizer
-
Product
DIGITAL TACHOMETER
IBL-DT2234C
-
International Biological Laboratories
This Hand Held Non Contact type Tachometer has 5 Digits LCD Display. It is used to measure RPM of equipment that is hard to reach. It is Battery operated. It is used to measure in the range of 5 to 99,999 rpm complete in a box with all standard accessories.
-
Product
Ethernet/LXI digitizerNETBOX 14 Bit High Speed Digitizer - 400 MS/s on 2 Channels, 2 Single-Ended Inputs
DN2.448-02
Digitizer
The digitizerNETBOX DN2.44x series allows recording of one, two, four or eight synchronous channels with sampling rates of 130 MS/s up to 500 MS/s. These products offer outstanding A/D features in resolution, bandwidth and speed as a remote instrument. The powerful A/D amplifier section offers six different input ranges, two input paths, AC/DC coupling and noise reduction filters.
-
Product
Digitizers
2740 Family
-
The 2740 Digitizer is a 64-channel digital signal processor for radiation detectors available in VME64 (V2740), VME64X (VX2740), and Desktop (DT2740) form factor. It offers not only waveform digitization and recording but also Multi-Channel Analysis for nuclear spectroscopy using Silicon strip, segmented HPGe, Scintillation detector with PMTs, Wire Chambers, and others. The 2740 can perform pulse height measurements (PHA), constant fraction timing (CFD), charge integration (QDC) and pulse shape discrimination (PSD) independently for each of the 64 channels.
-
Product
Digital Refrigerant Gauges
-
Our wireless digital manifolds are designed to measure a wide range of parameters in refrigeration, cooling and heat pump systems, including pressure, evacuation and overheating, as well as undercooling for over 100 different refrigerants.
-
-
Product
CPCI Or PXI Analog IO Board
MS 1808
-
*Bus Interface*PCI Bus Interface, 6U Form Factor*Facility for Calibrating all Output channels*Hot Swap facility*Driver interface for Windows2000/XP/VISTA and LINUX OS
-
Product
3U CPCI I/O & Comm Board W/Gig-E Switch
75D4-H2
Multifunction I/O
The 75D4-H2 is a Layer 2+ Gigabit Ethernet Switch built upon NAI’s multifunction, 3U cPCI board technology. The 75D4 motherboard contains a high-density I/O module slot that supports an H2 switch function. The 75D4 with H2 consumes approximately 9.5 W of total power at 5 V to operate at full 1000 Base-T speeds. In addition, the 75D4 motherboard can integrate four channels of RS232/423/422/485 serial communications. This adds an additional 1.5 W of 5 V power. Serial data is available on the cPCI bus or can optionally be available over Ethernet via the use of one of the switch ports.
-
Product
Digital Signage Player
-
Axiomtek's high performance digital signage box players are designed to support the latest Intel processors with integrated Intel HD Graphics to provide outstanding computing performance and superb full HD graphics capability. The entry-level signage box players are the surprisingly affordable, space saving, and superior graphics solutions. The fanless, compact chassis enhances reliability and enables the unit to easily fit into any space-limited environments.
-
Product
Digital Durometer
Model DD-4
-
The Rex DD-4 Digital Durometer is the successor to the popular Rex DD-3. With its impressive list of features, the DD-4 is truly state-of-the-art, and is the ideal instrument for lab use. Some of the new features are: a new, larger direct drive LCD display, USB data ports for computer compatibility, a locking feature to prevent accidental erasure of tolerances, automatic shutoff, and low battery warning. Available ASTM Types: A, D, B, C, DO, E, M, O, OO, OOO, and OOO-S.
-
Product
Digital Light Meter
ET130
-
Klein Tools ET130 is an easy-to-use precision light meter that measures illuminance levels in both Foot Candles (FC) and Lux. Backlit LCD display screen with bar graph assists when monitoring light levels and for retrofit projects. Includes custom carrying pouch and 9V battery.Auto and manual range: 4000 FC; 40,000 Lux
-
Product
VME & CPCI Systems
-
Verotec has a selection of configured systems plus individual elements such as backplanes, power supplies and cooling products, compliant with the PICMG / VITA specifications, and supported by a range of accessories. We offer these in standard VME and CompactPCI platforms across various mechanical form factors with customising options to suit specific applications.
-
Product
Digital Multifunction
-
Contrel Elettronica s.r.l. Company
The DIN rail and front panel multimeters are ideal for installation in secondary distribution panels. Measurement of the main electrical parameters. Measurement of active, reactive and apparent energy. Modbus RTU, Modbus TCP, Profibus, M-Bus protocol. Digital outputs programmable as alarms or pulses.
-
Product
3U cPCI Sensor Interface Unit
SIU31
Sensor Interface Unit
NAI's SIU31 is a highly configurable rugged COTS system or subsystem ideally suited for military, industrial, and commercial applications that require high-density I/O, communications, Ethernet switching, and processing. The SIU31 uses one NAI field-proven, 3U cPCI board to deliver off-the-shelf, SWaP-optimized COTS solutions that "Accelerate Your-Time-to-Mission."
-
Product
PXIe-5775, 12-Bit, 6.4 GS/s, 2-Channel PXI FlexRIO Digitizer
785590-01
FlexRio Digitizer
The PXIe-5775 is a PXI FlexRIO Digitizer that provides 6 GHz of AC-coupled analog bandwidth and 12 bits of resolution. You can operate the PXIe-5775 in a dual-channel mode at 3.2 GS/s or in a single-channel interleaved mode at 6.4 GS/s. With a passband from 1 MHz to more than 6 GHz, the PXIe-5775 is ideal for high-bandwidth frequency domain applications, including radar prototyping, LIDAR, and communications. The FlexRIO driver includes support for finite acquisition, and you can implement custom algorithms and real-time signal processing on the LabVIEW-programmable Xilinx Kintex UltraScale FPGA.
-
Product
1 A DIGITAL MILIOHMMETER
MO-2Ke
-
The MO-2Ke digital low resistance ohmmeter is a portable, microprocessor-controlled instrument used to accurately measure resistances of contacts, switches, transformer and motor windings, etc., using test currents from 1 mA up to 1 A.It uses the Kelvin-type (4-terminals) measurement principle, thus eliminating errors caused by lead and contact resistances.Resistance readings are shown in the alphanumeric display with up to a 4 digit-resolution. It allows to measure resistances of up to 2 kO, with resolution of 0.01 mO.Measurements accuracy is guaranteed by the state-of-the-art system for signal-amplification, offset-free and with long-term stability.
-
Product
Digital Pressure Gauges
-
Digital gauges with alarms, DC loop-powered gauges, differential pressure gauges, and a variety of features. They provide fast results with clear readability and very high accuracy.
-
Product
AstroAI Digital Multimeter
10000
-
AstroAI Digital Multimeter 10000 Counts TRMS Auto-Ranging Color LCD Screen Voltmeter, Fast Accurately Measures Voltage Current Amp Resistance Continuity Duty-Cycle Capacitance Temperature
-
Product
Digital Infrared Thermometer
IR-710
-
Shenzhen Calibeur Industries Co., Ltd..
'- Non-Contact Infrared Thermometer With Laser Targeting '- Range: -38° C to +520° C/-36.4° F to +968° F'- Accuracy : < 0°C： ±3% or ± 3°C ≥0°C： ±2% or ±2°C'- Distance spot ratio (D:S) : 8:1'- ℃/℉ exchange,'- Size: 180x80x40mm'- Weight: 120g'- Power: AAA1.5V 2pcs (not included)
-
Product
Digital Manometer
-
Shenzhen Graigar Technology Co.,Ltd.
A manometer is a pressure measuring instrument, or pressure gauge, often limited to measuring pressures near to atmospheric. Manometers come in two types Analog Manometers and Digital manometers. Analog Manometers. An analog manometer is a U-tube shaped glass tube partially filled with liquid.
-
Product
Digital Gauge Pressure
ZET 7012-I-VER.3
-
Digital gauge pressure ZET 7012-I-VER.3 meter is used for fast and simple overpressure measurements and measured values data transfer in digital format via RS-485 or 4-20 mA interface.
-
Product
Digital Electronic Scale
-
A type of electronic weighing machine, which is used to measure many readings
-
Product
PXI Semi-Dynamic Digital I/O Module, 48-Channel
40-419-002
Digital I/O Module
The 40-419-002 is a 48-channel digital I/O module suitable for operating external devices, such as power, RF and high voltage relays, solenoids and lamps. It can also be used for interfacing with external logic such as a programmable instrument with a BCD interface depending upon the module’s driving capabilities.
-
Product
Digital Clamp-On Multimeter
CMP-200
-
The CMP-200 meter is a small portable instrument for direct measuring of AC/DC current up to 400 A. The meter, when used with additional measurement cables, enables measuring the AC/DC voltage up to 600V. It can also measure resistance with acoustic continuous signal.
-
Product
Digital Surge Tester
25KV, 30KV & 40KV
-
The Digital Surge Tester is designed specifically to test the coils and windings of High range AC Rotating machines ranging up to 13.8KV. The Surge Tester has an Embedded Industrial PC with 8 inch Touch screen Display and software to Store, Recall and Print the Test Reports.
-
Product
Digital Lux Meters
Model KM LUX 99
-
Kusam Electrical Industries Limited
• Precise & easy readout.• High accuracy in measuring.• LSI - circuit use provides high reliability & durability.• Permits a wide range of light measurements.• Low Battery Indication.• Auto zero adjust.• Compact, light-weight, & excellent operation.• LCD display can clearly read out even in High Ambient Light• LCD display provides low power consumption.• Separate LIGHT SENSOR allows user take measurements at an optimum position.
-
Product
Digital Phase Shifters
-
An electronic device that changes the timing (phase) of an RF/microwave signal in precise, stepped increments, controlled by digital signals (like 0s and 1s), not continuously like analog versions.
-
Product
6U CPCI Switch Board
CP68302
-
LinkedHope Intelligent Technologies Co.,Ltd.
CP68302 is compliant with PICMG CompactPCI specification. The switch board is largely applicable to high speed data switching and routing among boards and payloads at the internal of CPCI and ATR chassis. With standard 6U CPCI form factor, the Switch is compatible with ATR mechanical designs. CP68302 is designed with two heat-dissipating solutions: traditional air-cooling and ruggedized conduction- cooling with reliable anti-shock and anti-vibration performance, and excellent heat dissipation capability.
-
Product
Digital Multiphase Controllers
-
Renesas' digital multiphase PWM controllers provide up to seven phases that are assignable in any combination across two outputs and combine with smart power stages to provide a scalable solution.
-
Product
Digital Multimeter
VA30
-
Shanghai Yi Hua V&A Instrument Co., Ltd. CO.,LTD
Digital multimeter 22000counts ACV DCV up to 1000V wih USB ,DC measurement accuracy reaches up to 0.01%.
-
Product
Digital Iodine Tester
MW13
-
The Milwaukee MW13 Iodine Photometer lets you go digital with your testing. No more hit and miss testing with strips. Great for aquariums, labs, water conditioning, classroom and more. This meter is also ideal for educators that want their students to learn the basics of water quality analysis to apply in the real world.
