-
Product
In-Circuit Emulator - 80C186/80C188 Family
DS-186
-
* Support for 80C186/8/XL/EA/EB/EC, 8086/8, V20/25/30/40/50 and other Microprocessors * Full-speed Emulation up to 25MHz * 1MB of Zero-Wait-State Mapped Memory * 8K x 32-bit Frames Dynamic Trace Buffer * 1MB Hardware Breakpoints * 115 KBaud RS-232 Communication Link * Numeric Coprocessor Support * OMF Converter * Support for Borland, Microsoft and Intel Compilers * Full Support for C, C++, Pascal and Assembler
-
Product
C++ Test Framwork
Google Test
-
a unit testing library for the C++ programming language, based on the xUnit architecture. It can be compiled for a variety of POSIX and Windows platforms, allowing unit-testing of C sources as well as C++ with minimal source modification.
-
Product
NI-9485 , 8-Channel, SSR Relay, 60 VDC/30 Vrms, 750 mA C Series Relay Output Module
779600-01
Relay Output Module
The NI-9485 allows for direct connection to a wide array of industrial devices such as motors, actuators, and DC devices. Each channel provides access to a solid state relay (SSR) for switching voltages up to 60 VDC/30 Vrms with switching current up to 750 mA per channel or up to 1.2 A on four channels. Each channel also features channel-to-channel isolation.
-
Product
Basic Contact Probes (75 Mil) F07514S120L200
1017552
-
The Basic Contact Probes (75 mil) F07514S120L200 are precision-engineered tools designed for high-performance applications. With a temperature range of -45°C to +80°C and a continuous current rating of 4.00 A, these probes are built for durability and reliability in various operational environments. Their compact design, featuring a total length of 33.10 mm and a nominal travel of 4.30 mm, ensures ease of use in tight spaces while maintaining excellent pointing accuracy of +/- 0.08 mm.
-
Product
Integrating Spheres For UV
-
Konica Minolta Sensing Americas, Inc
Instrument Systems offers complete measurement solutions for UV-A, -B and -C radiation starting from 200 nm. The operation of the well-proven Instrument Systems spectroradiometers, e.g. CAS series, with integrating spheres made from PTFE facilitate high sensitivity measurements of UV radiant flux.
-
Product
Electronic DC Load, 80V, 80A, 400W With/without Remote Interfaces
LD400 Series
-
Versatile solution for testing dc power sourcesConstant current, resistance, conductance, voltage and power modesWide voltage and current range, 0 to 80V and 0 to 80A400 watts continuous dissipation at 28°C (360W at 40°C)600 watts short-term dissipation (up to 60 seconds)Low minimum operating voltage of <1V at 40AHigh resolution and accuracy for level settingBuilt-in transient generator with variable slewCurrent monitor output for waveform viewingVariable drop-out voltage for battery testingHigh resolution backlit graphic LCD with soft key controlAnalogue remote control of levels and TTL control of on/off and transient switchingFront and rear input terminals (front terminals 30A max.)Full bus control via USB, RS232 and LXI compliant LAN interfaces (LD400P)GPIB option (LD400P only)
-
Product
Cable Assembly. 9-Pin D-Type Male To Unterminated With Ferrules, 1m, HV
40-972-009-1m-MU-HV
Cable Assembly
A range of 9-Pin D-Type High Voltage cable assemblies with unterminated connections on one end, constructed from PTFE Type C insulated wire. The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot breakwhen they are terminated.
-
Product
Basic Contact Probe VF406B230G25
1172912
-
The VF406B230G25 Basic Contact Probe is an essential component for precise measurements in various applications. Engineered with a pitch of 4.00 mm (157 mil), this probe operates efficiently within a temperature range of -45°C to +100°C, ensuring reliability even in extreme conditions. Its design emphasizes durability and accurate performance, making it a trusted choice for professionals in demanding environments.
-
Product
C Series Multifunction I/O Module
Multifunction I/O
The C Series Multifunction I/O Module is a cost-effective, general-purpose I/O module that helps system designers fit more functionality into a single system. The module includes analog input, analog output, and 5 V TTL digital I/O channels. You can use the C Series Multifunction I/O Module with select APIs such as LabVIEW FPGA.
-
Product
FM Tokenless Transmitter & Receiver
MS 1522
-
Transmitter and Receiver units are designed to work at 24V DC voltage (nominal) with variation between 19.2 V to 28.8V. The system is designed to work with carrier frequency 1800/2700 Hz and modulated frequency 65Hz/85Hz. For 1800Hz Carrier Frequency RED border is used in Front Panel and for 2700Hz Carrier Frequency BLUE border is used in Front Panel. Maximum power consumed by transmitter and receiver are 1.2W and 8W, respectively. Sense level for receiver is less than –19 dBm and No sense level for receiver is more than –22 dBm with 1mw (0 dBm) transmitter power. The equipment is designed to work satisfactorily with temperature variation from 0°C to 55°C with relative humidity of 95% at 35°C. Suitable test points are provided in the back of the equipment to monitor the necessary parameters.
-
Product
Step Probe F73216B1064G300SP1
1011271
-
The F73216B1064G300SP1 Step Probe is designed for high-precision applications, merging the essential functionalities of the F732SP model with advanced technical capabilities. Built to operate efficiently within a temperature range of -45°C to +100°C, this probe maintains stability and reliability even in challenging thermal environments. The design features a pitch of 2.54 mm, optimizing it for various electronic testing applications where space and precision are critical.
-
Product
cDAQ-9185, 4-Slot, TSN-Enabled Ethernet CompactDAQ Chassis
785064-01
Chassis
4-Slot, TSN-Enabled Ethernet CompactDAQ Chassis - The cDAQ-9185 is a CompactDAQ Ethernet chassis designed for distributed sensor measurement systems. The chassis controls the timing, synchronization, and data transfer between C Series I/O modules and an external host. With this chassis, you can combine C Series I/O modules to create a mix of analog I/O, digital I/O, and counter/timer measurements. The chassis provides precise, synchronized timing over the network using TSN, ideal for highly distributed measurements over long distances. The chassis has an integrated network switch for simple daisy-chaining. The chassis also has four 32-bit general-purpose counters/timers, accessible through a hardware-timed digital C Series module for applications that involve quadrature encoders, PWM, pulse train generation, and more.
-
Product
Twist Proof Probes (F755) F75589B0001G300E13
1009861
-
The Twist Proof Probes (F755) F75589B0001G300E13 are precision-engineered contact probes designed for reliable performance in demanding applications. With a pitch of 4.50 mm, these probes are built to withstand extreme temperatures ranging from -45°C to +200°C, making them suitable for a variety of environments. The design ensures a stable connection with a continuous current capability of 10 Amperes and a typical contact resistance of only 30 mOhms, ensuring efficient electrical performance. Each probe is meticulously crafted to ensure exceptional pointing accuracy of ±0.10 mm, providing engineers with the reliability they need for critical measurements.
-
Product
Class 2 Sound Level Meter
SP79
-
The SP79 is a Class 2 sound level meter for on-site measurements in accordance with Noise at Work legislation in industrial and office environments. Featuring A and C frequency weighting and fast and slow time weighting, the compact design can be handheld, or mounted on a tripod for longer term monitoring of Min / Max values. Detailed recording and analysis can be made using the AC and DC outputs. The SP79 complies with BS EN 61672-1:2003 and is supplied with a detachable windshield and hard carry case. The large high contrast display includes both digital reading and analogue bar graph. An optional Class 2 sound level calibrator is available to verify accuracy before and after readings in accordance with international standards. The SPC70 is simple to use and provides a 1kHz reference at 94dB and 114dB.
-
Product
Basic Contact Probes (100 Mil) F10062B090G300
1013022
-
The Basic Contact Probes (100 mil) F10062B090G300, identified by order code 1013022, are engineered for precision and reliability across various applications. This contact probe features a design that is both compact and robust, made to deliver reliable electrical contacts in challenging environments. With a proven operating temperature range from -45°C to +80°C, it ensures optimal performance across diverse conditions, making it suitable for a wide range of testing and measurement tasks.
-
Product
ARINC 429 Test And Simulation PCIe Module
PCIe-C429
-
*4, 8, 16 or 32 software programmable TX / RX channels*X4 lane PCI Express host interface*Programmable high / low speed operation*Simultaneous operation of all TX / RX channels*Error entry and detection*128 MB RAM*Label selective triggering for recording / filtering*Sorting according to SDI field*IRIG-B timecode encoder / decoder for data correlation*Real-time recording and later analysis of multiple channels*Supports: C, C ++, C # and .net*Driver support: Windows, Linux, VxWorks and other systems
-
Product
Basic Threaded Probes (F175, F176) F17506B100G150
1021022
-
The Basic Threaded Probes (F175, F176) F17506B100G150 are essential components designed for a wide range of applications, ensuring reliable performance under critical conditions. This model specifically, with order code 1021022, features a basic contact probe design that operates effectively within a temperature range of -45°C to +100°C. The probes are engineered to accommodate a pitch of 1.90 mm, delivering precision measurements necessary for meticulous tasks. With a continuous current capacity of 4.00 A and a typical contact resistance of only 20.00 mOhm, these probes ensure efficient connectivity and minimal resistance for reliable data acquisition.
-
Product
Pogo Connectors (≤ 3,50mm / 138mil) P19711B130G050TL053ST
1037574
-
The Pogo Connectors (≤ 3,50mm / 138mil) P19711B130G050TL053ST offer exceptional reliability and performance in various applications. Designed as a basic contact probe, this product features a family designation of P-T / P197T-L053. With a pitch of 3.00 mm (118 mil) and an operating temperature range from -45°C to +200°C, these connectors excel in both extreme environments and standard usage scenarios, ensuring a robust connection no matter the conditions.
-
Product
Basic Contact Probes (75 Mil) F07536B120G200
1017551
-
The Basic Contact Probes (75 mil) F07536B120G200 offer robust performance and versatility, designed to meet the high standards required in various electrical applications. Optimally engineered for precision, these probes maintain a continuous current capacity of up to 4.00 A with an impressive typical contact resistance of just 20 mOhm, ensuring reliability and efficiency in signal transmission. They operate effectively across a wide temperature range of -45°C to +80°C, making them suitable for demanding environments.
-
Product
Basic Contact Probes (75 Mil) F56106B150G150
1019565
-
The Basic Contact Probes (75 mil) F56106B150G150 are specifically designed for high precision applications where reliability is critical. These probes feature a pitch of 75 mil and can operate effectively across a temperature range from -45°C to +80°C. With robust mechanical specifications including a preload of 70 cN and a spring force of 150 cN, they ensure consistent performance under varying load conditions. The nominal travel of 2.40 mm allows for ample flexibility in connector engagement, while maximum travel capped at 3.00 mm ensures safety in dynamic applications.
-
Product
Basic Contact Probes (100 Mil) F78610S080P300HP
1032612
-
The Basic Contact Probes (100 mil) F78610S080P300HP are essential components designed for precision in various electrical applications. Built to withstand extreme conditions ranging from -45°C to +80°C, these probes are ideal for demanding environments. Their robust construction features a nickel silver barrel and multiple plating options including gold for optimal conductivity. The unique design includes a retractable plunger made from durable steel, ensuring longevity and reliability in function.
-
Product
Basic Contact Probe HCF72306B230G080
1009987
-
The HCF72306B230G080 is a high-performance basic contact probe specifically designed for power electronics applications. With a continuous current rating of 30 A, this probe ensures reliable and efficient measurement capabilities in various testing environments. The temperature range extends from -45°C to +200°C, making it adaptable for both low and high-temperature applications. Its compact design features a pitch of 4 mm, which allows for precise placements in electronic assemblies, while maintaining accuracy in measurements with a pointing accuracy of ±0.1 mm.
-
Product
Basic Contact Probes (75 Mil) F07514S078L150
1128421
-
The Basic Contact Probes (75 mil) F07514S078L150 are designed to deliver reliable data connectivity in a variety of applications, outperforming typical conventional connectors. With a pitch of 75 mil (1.90 mm) and a temperature range of -45°C to +80°C, these probes are robust enough to handle extreme conditions while ensuring excellent signal integrity. Additionally, their exceptional mechanical specifications, including a preload of 70 cN and a spring force of 150 cN, make them ideal for applications that require precise measurements and consistent performance.
-
Product
Basic Contact Probes (138 Mil) F77318B180G300
1001532
-
Introducing the Basic Contact Probes (138 mil) F77318B180G300, a specialized solution designed for precision applications in demanding environments. This model boasts a pitch of 3.50 mm (138 mil), ensuring accuracy and reliability across various electrical and mechanical specifications. Able to operate within a temperature range of -45°C to +80°C, these probes are suitable for diverse settings, delivering consistent performance in critical applications.
-
Product
Step Probes (F731SP) F73111B0027G100SP
1032521
-
The Step Probes (F731SP), specifically the model F73111B0027G100SP, is designed for high-precision applications with its 2.40 mm pitch, allowing for effective connectivity in various electronic testing situations. This versatile probe operates within a temperature range of -45°C to +100°C, making it suitable for a wide array of environmental conditions. The enhanced build quality is imparted by materials like beryllium copper for the plunger and brass for the barrel, both plated with gold for improved conductivity and durability.
-
Product
Cable Assembly, 37-Pin D-Type, Female to Unterminated With Cut Ends, 1m, HV
A037DF4-C-HA100
Cable Assembly
The 37-Pin D-Type HV Cable assemblies are constructed from 7/0.2 (24AWG) Tinned Copper Wire with PTFE Type C insulation. The connector assembly can be secured to the mating part by a screwlock. The 37-Pin Female connector options of this product can be directly mated to a corresponding Pickering Interfaces switching product.
-
Product
5FE Unmanaged Ethernet Switch, ATEX/C1D2, -40~75℃
EKI-5525I
-
Communicates with SCADA software via Modbus/TCPCommunicates with NMS (Networking management system) via SNMPPort-based QoS for deterministic data transmission40~75°C operating temperature range8.4~52.8 V DC wide-range power inputEMS level 3 protection for extreme outdoor environmentsIEEE 802.3az Energy Efficient Ethernet (EEE)Supports redundant 12~48V DC power input and P-Fail relayLoop detection
-
Product
F50421B105G150L217
1013379
-
The F50421B105G150L217 is a highly reliable basic contact probe developed by Interface Solutions (Interface Probes), specifically designed to meet a range of technical requirements in various applications. With a pitch of 2.54 mm (100 mil), this probe is temperature resistant, operating effectively in environments ranging from -45°C to +80°C. The construction incorporates high-quality materials ensuring durability and precision in performance, making it suitable for both standard and demanding tasks in electronic applications.
-
Product
Basic Contact Probes (100 Mil) F77117B180G150
1043631
-
The Basic Contact Probes (100 mil) F77117B180G150, order code 1043631, are a critical component for applications requiring precision and reliability in electrical measurements. Designed with a pitch of 2.54 mm (100 mil), these probes operate efficiently in a temperature range from -45°C to +80°C, making them suitable for a variety of environments. Their construction ensures optimal functionality, with features that emphasize durability and performance.
-
Product
F87917K180U200
1017115
-
The F87917K180U200 Switch Probe (Order code 1017115) is designed for precision applications requiring a reliable normally open (NO) switch mechanism. Engineered within the F879-NO family, this basic contact probe offers stability and performance in diverse environments, functioning optimally between -45°C and +100°C. Its unique design incorporates a pitch measurement of 2.54 mm, making it perfect for advanced electronic testing applications. The total length of the probe measures 24.50 mm, with a pointed tip diameter of 1.80 mm, facilitating targeted contact in compact spaces.
