Code
See Also: Programming, Scripts
-
Product
2-kbit 12C EEPROM for Fixture Coding
FXA-101 I2C EEPROM
-
The FXA-101 is a 2-kbit serial I²C bus EEPROM used for identification of systems components. With it’s DIP switch it’s easily addressable. The FXA-101 may be glued directly to the appropriate component or inserted into a UMK housing from Phoenix Contact and installed on a DIN rail.
-
Product
4-Pin Power D-Type Female to Unterminated With Tinned Ends
A008PF4-T-6A050
Cable Assembly
The 4-Pin Power D-Type Connector to Unterminated Cable Assy is constructed from PVC insulated 56/0.3 (12AWG) Copper wire. The connector can be secured to the product by screwlocks and the unterminated connections are coded to match the connector pin designation.
-
Product
Cable Assembly 68-Pin Micro-D Male to Unterminated
A068SMR-T-6A050
Cable Assembly
The 68-Pin Connector to Unterminated Cable Assy is constructed from 7/36 (28AWG) twisted pair wires with polypropylene insulation. The wires are colour coded to match the connector pin designation. The connector can be secured to the product by 2-56 UNC Screwlocks.
-
Product
Test Program Quality Verification
CodeReport
-
CodeReport is an easy-to-use application for verifying test program quality. CodeReport comes with many different, known quality screening rules that can be used to verify your test program is complete and ready for production. CodeReport also provides a graphical Rule Editor that allows you to create your own, custom rules. Ensure your coding standards and quality specifications are correct by generating your set of rules, checks, and screenings. Easily generate a detailed report for locating, correcting, and documenting the state of your test program. Quickly identify the tester hardware and instrumentation needed to run your program with the Tester Resource report. Save a session file to quickly return to your project after edits have been made or use the Session on other similar projects to transfer your configuration and custom rules.
-
Product
Portable Electrical Management Systems
EMS-LCHW30
-
Progressive Industries Portable Electrical Management Systems (EMS) provide full RV protection against all adverse power conditions. You will feel secure with multi-mode surge, voltage, polarity and lost/open neutral protection. Each unit includes a digital display, scrolling continuously through the power source information: Voltage(s), current, frequency, error code, and previous error code (if applicable). Replacement parts are simply plug-and-play, making repairs quick and easy. As with our portable models, the computer is driven by state of the art microprocessors. Should the software ever change, EMS owners can receive a free upgrade at no cost.
-
Product
Basic Contact Probes (100 Mil) F10033S090L225
1092045
-
The Basic Contact Probes (100 mil), identified by order code F10033S090L225, are engineered for precision and reliability. With a pitch of 2.54 mm (100 mil), these probes are designed to function effectively within a temperature range of -45°C to +80°C, making them suitable for various applications in demanding environments. The probes feature a robust design with a continuous current rating of 5.00 A and a typical contact resistance of merely 20 mOhm, ensuring optimal performance and minimal power loss during operation.
-
Product
Hybrid Verification Platform
HES-DVM
-
HES-DVM™ is a fully automated and scalable hybrid verification environment for SoC and ASIC designs. Utilizing the latest co-emulation standards like SCE-MI or TLM and newest FPGA technology, hardware and software design teams obtain early access to the hardware prototype of the design. Working concurrently with one another they develop and verify high-level code with RTL accuracy and speed-effective SoC emulation or prototyping models reducing test time and a risk of silicon re-spins.
-
Product
MIL-STD-1553 USB & LAN Test & Simulation Module
UXI-1553
-
Avionics Interface Technologies
Dual redundant, single, dual, or quad stream configurationsConcurrent BC, 31 RTs, and BM operations - Physical Bus ReplayFull error injection/detection capabilities - Programmable trigger and capture - Programmable Bus Coupling and Output Voltage Levels - Onboard IRIG-B time code encoder/decoder for Synchronization - Time Synchronization to IEEE 1588 via Ethernet LAN port - 10 Discrete I/O Interfaces (5 Outputs / 5 Inputs) - Operates from a single USB or Ethernet LAN connection - Supports SAE AS4112/4114 protocol testing requirements- Flight Simulyzer™ GUI Analyzer software
-
Product
Push Back Probes (VF3) VF383B0008G15
1007117
-
The Push Back Probes (VF3) VF383B0008G15, assigned order code 1007117, represents an efficient solution for contact probing across a variety of applications. With an operational range of -45°C to +100°C, these basic contact probes are designed for robust performance in both low and high-temperature environments. Featuring a pitch of 3.00 mm, the probes ensure dependable connectivity, especially in precise applications where accuracy is paramount. Equipped for a continuous current of 8.00 A, these probes provide the electrical capacity needed for demanding tasks while maintaining a typical contact resistance of just 30 mOhm, thus optimizing efficiency and minimizing energy loss.
-
Product
Cable Assembly 15-Pin D-Type, Male to Unterminated With Ferrules, 2m
40-972-015-2m-MU
Cable Assembly
The 15-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper Wire. The connector can be secured to the associated product by screwlocks.The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated. When using this product additional cable strain relief arrangements may be necessary and appropriate electrical safety precautions should be observed.
-
Product
Cable Assembly, 26-Pin D-Type, Male to Unterminated With Ferrules, 2m
40-972-026-2m-MU
Cable Assembly
The 26-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 7/0.15 (26AWG) Silver Plated Copper Wire. The connector can be secured to an associated product by screwlocks. The unterminated connections are coded to match the connector pin designation and include crimped on ferrules to ensure the wire strands cannot break when they are terminated. Please ensure appropriate electrical safety precautions are observed when using this product.
-
Product
Cable Assembly, 25-Pin D-Type, Male to Unterminated With Tinned Ends, 0.5m
A025DM5-T-0A050
Cable Assembly
The 25-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper wire. The connector can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation. Please ensure appropriate electrical safety precautions are observed when using this product.
-
Product
Step Probes (F732SP) F73211B1048G150SP
1008905
-
The Step Probes model F732SP (Order code 1008905) is meticulously designed for precision applications with a pitch of 2.54 mm (100 mil) and allows for a wide operating temperature range from -45°C to +100°C. These probes feature exceptional electrical specifications, including a continuous current rating of 5.00 A and a typical contact resistance of just 20.00 mOhm, making them ideal for reliable and efficient electrical connections in various environments.
-
Product
Switch Probes (Normally Open (NO)) F88517K230U350SM
1004338
-
The Switch Probes (Normally Open - NO) F88517K230U350SM, identified by order code 1004338, is a meticulously crafted basic contact probe from the F885-NO family. With a pitch of 3.50 mm and a temperature range from -45°C to +100°C, this product showcases reliability in various operating conditions. Its exceptional design guarantees robustness, making it an ideal choice for precision applications.
-
Product
802.11ad Testbed, Reference Solution
-
Generate and analyze 802.11ad fully coded PHY waveforms for complete component, subsystem, and system performance at baseband, IF, and millimeter-wave. This Reference Solution combines Keysight Technologies software and hardware to provide a flexible testbed for 802.11ad waveform generation and analysis. Software provides the flexibility to generate and analyze 802.11ad waveforms with a wide range of different attributes. Hardware provides the flexibility to support baseband, IF, and millimeter-wave test planes. Create waveform sequences with unique 802.11ad packet structures including Modulation Coding Scheme (MCS), packet length, payload data type, and interpacket gap length, etc.
-
Product
4-Pin Power D-Type Female to Unterminated With Tinned Ends
A008PF4-T-6A200
Cable Assembly
The 4-Pin Power D-Type Connector to Unterminated Cable Assy is constructed from PVC insulated 56/0.3 (12AWG) Copper wire. The connector can be secured to the product by screwlocks and the unterminated connections are coded to match the connector pin designation.
-
Product
Timing Systems
-
ime Codes, generally in serial form, are used to convey time information from one point to another. Many different time code formats have been developed over the years, by both commercial and military agencies. Many of our products support one or more of these time codes as a standard feature.
-
Product
Switch Probes (Normally Open (NO)) F88617K300U200SM
1006214
-
The Switch Probes (Normally Open (NO)) F88617K300U200SM, with order code 1006214, is designed to provide dependable performance for a variety of applications. Featuring a basic contact probe design, this product boasts remarkable technical specifications, including a pitch of 3.50 mm or 138 mil. This device can operate within a broad temperature range of -45°C to +100°C, ensuring versatility in various environments. With its family designation of F886-NO, the probe stands out due to its reliability and efficiency in signal detection, making it an essential component in electronic circuitry.
-
Product
Staple Lock Drum Sprays
2801
-
The Parker Conflow Code 2801 - staple lock drum spray provides a superior fluid spraying system for cutting drums in dust supression applications
-
Product
Basic Contact Probes (100 Mil) F77217B200G300H
1125623
-
The Basic Contact Probes (100 mil) F77217B200G300H, order code 1125623, is a highly precise and reliable tool designed for diverse electrical and mechanical applications. Capable of functioning within a temperature range of -45°C to +100°C, this probe ensures consistent performance under various environmental conditions, making it an ideal choice for engineers and technicians seeking robustness and accuracy. With a continuous current rating of 5.00 A and a typical contact resistance of only 100 mOhm, it guarantees efficient electrical connectivity, vital for high-performance circuitry.
-
Product
Cable Assembly, 25-Pin D-Type, Female to Unterminated With Tinned Ends, 2m
A025DF4-T-0A200
Cable Assembly
The 25-Pin Connector to Unterminated Cable Assy is constructed from PFA insulated 19/0.18 (21AWG) Tinned Copper wire. The connector can be secured to the product by screwlocks. The unterminated connections are coded to match the connector pin designation. Please ensure appropriate electrical safety precautions are observed when using this product.
-
Product
RE Family Development Environment
-
Renesas offers integrated development environments, driver software, sample code, an evaluation kit, and flash programmers for accelerating your system development.
-
Product
Laser Diode Source Product Family
LDS-7200
-
5 nanometers tuning range• 10 picometer setpoint accuracy• 0.1 picometer resolution• 20mW output power• 0.005 dB power stability• Built-in coherence control• Integrated function generator• USB remote interface• Application program with source code
-
Product
FEWZ-050E53
1014603
-
The FEWZ-050E53 is a high-quality plug-in probe designed for precision in various tools and equipment applications. Its compact dimensions, with an overall length of just 87.30 mm, make it suitable for tight spaces while still delivering reliable performance in demanding settings. This tool, identified by order code 1014603, is perfect for users requiring both efficiency and accuracy in their projects.
-
Product
Cable Assembly 68-Pin Micro-D Male to Unterminated, Tinned Ends, 0.5m, Spring Latch
A068SMR-T-5B050
Cable Assembly
The 68-Pin Connector to Unterminated Cable Assy is constructed from 7/36 (28AWG) twisted pair wires with polypropylene insulation. The wires are colour coded to match the connector pin designation. The connector can be secured to the product by a Metal Spring Latch.
-
Product
Basic Contact Probes (75 Mil) F07533S064L150L
1004663
-
The Basic Contact Probes (75 mil) model F07533S064L150L, order code 1004663, is an essential component for applications requiring precise electrical connectivity and reliability in harsh conditions. Operating in extreme temperatures ranging from -45°C to +80°C, the probe design ensures consistent performance even under challenging environmental factors. With the capacity to handle a continuous current of 4.00 A and a typical contact resistance of just 20 mΩ, it's perfect for those who need robust performance without sacrificing efficiency.
-
Product
Single Slot Intelligent Interface Card
IIB-3910-CPCI
-
The IIB-3910-CPCI is a single slot intelligent interface card providing complete STANAG 3838 and STANAG 3910 test, simulation and bus analysis capability for the CompactPCI Bus. The IIB-3910-CPCI supports concurrent Bus Controller (BC) and up to 31 Remote Terminals (RT) with Bus Monitor (BM). An additional stand-alone Chronological Bus Monitor (CBM) facility is also provided, with powerful multi-level triggering capability. Full error injection capability in both 3838 and 3910 modes is provided in BC and RTs modes, with full error detection in BC, RT, BM and CBM modes. Dual redundant 3838 interface, with user selectable dual redundant optical or single redundant electrical 3910 interface are featured. 2 Mbytes of dual ported RAM are provided. The board is supplied with C drivers in source code and Windows menu driven software as standard.
-
Product
Basic Contact Probes (100 Mil) F10005B150P200HP
1135348
-
The Basic Contact Probes (100 mil) F10005B150P200HP, identified by order code 1135348, are precision-engineered components designed for optimal performance across a range of applications. These probes are constructed to endure extreme temperatures from -45°C to +80°C, making them suitable for various environments. The robust design features a reliable connection, highlighted by a continuous current rating of 5.00 A and a typical contact resistance of just 40.00 mOhm. With a preload of 130.00 cN and spring force reaching up to 200.00 cN, these contact probes offer durability and strength without compromising on accuracy, boasting a pointing accuracy of +/- 0.08 mm.
-
Product
Testing solutions
-
From Manual Testing, to test automation Ideabytes Inc is a one stop shop for all testing needs. Among the specialities Model Based Testing that changes the approach to testing reducing cost and catching faults early. With our methodologies, automated test cases are ready just as the developers are releasing their code. Contact us for a free consultation!
-
Product
H888AES1
1155754
-
The H888AES1 is a robust and precision-engineered component, proudly representing the latest in mechanical design and functionality. With an order code of 1155754, this product integrates crucial features tailored for flux-proof solder connections, ensuring reliability in various applications. Its total length of 13.20 mm and an outer diameter of 2.90 mm allows it to fit seamlessly in compact assemblies, making it an ideal choice for engineers looking to optimize space without compromising performance.
