Kelvin Clips
A spring clip where the jaws are insulated from each other at the hinge point. 4-wire
See Also: Clips, Alligator Clips, DIP Clips, IC Clips, Test Clips
-
Product
Kelvin Probes (F822) F82203S0001L650
1017322
-
The Kelvin Probes (F822) F82203S0001L650 is a precision coaxial probe designed for high-performance applications, capable of operating within a temperature range of -45°C to +200°C. This robust probe features a compact design with a total length of 31mm and an array of specifications that ensure reliable electrical performance. With a continuous current rating of 6.00A and a typical contact resistance of 60.00mOhm, the F822 is well-suited for precise measurements in various testing environments. The design incorporates durable materials, including beryllium copper and high-grade steel, ensuring longevity and consistent performance even under demanding conditions.
-
Product
Alligator Test Clips
-
Alligator clips are spring loaded clips that are used to temporarily connect wires to components on circuit boards, connector pins, or other terminals.
-
Product
Coaxial & Kelvin Probes
73 Series
-
American Probe & Technologies, Inc.
The 73 Series of coaxial probes are excellent for most low current applications. They are available in several styles that include coax with integrated mounting shank, single and dual (series resistor), and Kelvin dual SSMC connections. For lower cost of ownership the 73CT Series replaceable coax tips for the 74CJ-APT-KS Series offers similar results. (replacement tips found in this section)
-
Product
Kelvin Probes (F810) F81016S040L230S1
1024032
-
The Kelvin Probes (F810) F81016S040L230S1 is an exceptional coaxial probe designed for precision measurements across a temperature range of -45°C to +100°C. Built with a meticulous engineering focus, this product is not only reliable but also boasts a compact design with a pitch of 2.54 mm (100 mil). This probe excels in environments requiring durable and high-quality performance, supported by additional specifications that highlight its range of applications in the industry.
-
Product
100 clip nuts, used with HW-1 & HW-53
HW-52
-
HW-52: Package of 100 clip nuts, used with HW-1 & HW-53
-
Product
Off-Set Kelvin Test Sockets
-
This is an innovative and robust contact technology for making Kelvin contact to 0.5mm pitch QFNs. The contact uses a tip that is angled to one side, matched to an orientation that's flat on the tip. Two such contacts placed in opposition will touch the pad within 0.125mm. And because the tip is offset, the probe diameter is a robust 0.39mm and the load board pad pitch remains 0.5mm.
-
Product
Kelvin Probes (F835) F83505B0006G120
1029805
-
The Kelvin Probes (F835) F83505B0006G120 is designed to excel in a variety of temperature-sensitive applications, featuring a robust operational range from -45°C to +100°C. With a precision pitch of 3.50 mm (138 mils), it guarantees reliable connections and accurate readings, making it an invaluable tool for testing in various environments. The F835 series is engineered to sustain continuous current ratings up to 10 A, alongside a typical contact resistance of 20 mOhm, ensuring both efficiency and reliability in electrical applications.
-
Product
1 N Clip Grips
-
These very low force 1 N (0.22 lbf) clip grips are for tensile testing fibers, tapes, and other similar shaped specimens. They are designed for use with 50 N (11 lbf) and below load cells.
-
Product
Kelvin Probes (F832) F83205S0001L650
1008249
-
The Kelvin Probes (F832) F83205S0001L650, designated with order code 1008249, offer advanced coaxial probe technology designed for a variety of precision measurements. Operating effectively in environments ranging from -45°C to +200°C, these probes are constructed with premium materials including a beryllium copper plunger plated with gold, and a brass barrel also featuring gold plating. This ensures not only durability but also reliable electrical performance under various conditions, permitting continuous current levels of up to 6.00 A. The probes are engineered with a nominal travel of 2.00 mm and feature a spring force of 450 cN, offering precise contact and reducing the chances of wear over time.
-
Product
Ten Foot Test Leads w/Screw On Alligator Clips
629-10
-
After numerous requests, we are introducing 10 foot version of our popular 629 test lead. This test lead is 10 feet long, with no connectors or reels. This test lead can be deployed for various applications involving the need for a longer reach. Also, there are no connectors or extension plugs to snag, catch or scratch any part of the vehicle.
-
Product
Minigrabber® Test Clip For Max. .090" Wire Dia, Do-It-Yourself
3925
-
Minigrabber? test clip for max. .090" wire dia, Do-It-Yourself, available in ten colors
-
-
-
Product
MINIATURE SILICON DIODE TEMPERATURE SENSOR, 2 To 600 Degress Kelvin
-
Insight Product Company offers SILICON DIODE TEMPERATURE SENSORS CAN BE USED FOR TEMPERATURE Â MEASUREMENTS IN DIFFERENT FIELDS OF CRYOGENIC ENGINEERING AND EXPERIMENTAL PHYSICS. THEY ARE MINIATURE AND OPERATE IN THE TEMPERATURE RANGE FROM 2 TO 600 K.
-
Product
Kelvin Probes (F822) F82203S0003L650
1017248
-
The Kelvin Probes (F822) F82203S0003L650 are designed for precision measurements in a variety of applications, seamlessly integrating robust engineering with advanced design principles. These coaxial probes ensure reliable performance under extreme temperatures ranging from -45°C to +200°C, making them an ideal choice for demanding testing environments. With a pitch of 5.50 mm (217 mil), they facilitate efficient connectivity and signal transfer between components, ensuring that even fine measurements remain accurate and consistent.
-
Product
Kelvin Test Contactor
cCompact
-
cCompact™ test contactor offers a reduced site-to-site pitch concept enables high parallel test for power applications on strip test and pick and place handler platforms.Featuring compact Kelvin footprint with outstanding CRES stability by Denmark pin material. Automotive temperature range -60°C to +175°C. Integrated Socket Air-distribution.
-
Product
FPC Test Connector Clip Connectors
-
FPC Test Connectors (Clip Connectors) can easily be inserted and can be used for repeat testing, saving time and money as well as minimizing damage.
-
Product
PEEK & PTFE Glassy Carbon Electrode Clip
GCC1
-
GCC1 PEEK and PTFE glassy carbon electrode clips provide stable electrical contact for straight and L-shaped glassy carbon electrodes. Available in PTFE, PEEK-S01, PEEK-S02, and L-shaped designs for standard and small-volume electrochemical cells.
-
Product
Mini SMD Grabber® Test Clip Lead With 4mm Jack
72929
-
Mini SMD Grabber Test Clip Lead with 4mm Jack
-
-
-
Product
Kelvin Probes (F800/F805) F80518B0001G250
1000083
-
The Kelvin Probes (F800/F805) F80518B0001G250 is an essential tool designed for precision measurement in various applications. With a pitch of 2.20 mm (87 mil) and an operating temperature range of -45°C to +150°C, these probes ensure reliable performance in challenging environments. Their robust construction features a Beryllium copper plunger, both plated in gold, providing excellent electrical conductivity and corrosion resistance. The probes are engineered to deliver consistent results with a typical contact resistance of just 20 mOhm and an impedance of 50 ohm, making them ideal for high-precision applications.
-
Product
BNC (F) To Minigator Test Clips
2631
-
BNC (f) to minigator test clips. Converts BNC (male) cables / connectors to minigator test clips for test versatility. BNC connector is molded directly to the wire for pull strength durability and dust and moisture resistance.
-
Product
Ultra-High Vacuum Ф4 Scanning Kelvin Probe
-
The Ф4 Ultra-high Vacuum Scanning Kelvin Probe system gives the user full access to work function measurements under vacuum with the ability to alter the temperature from 77 K to 860 K. The Kelvin Probe measurement has resolution of 1 - 3 meV for a 2 mm tip on a conducting sample. The sample is mounted on a plate that is located on a motorized (x, y, z) translator attached to a stainless-steel vacuum chamber. Phi 4 also comes with a photoemission spectroscopy system with a tuneable source (3.4 - 7.0 eV). The deep ultra-violet (DUV) light spot measures approximately 3 x 4 mm. Absolute work function measurements can be obtained with this system in the range of 4.0 - 6.5 eV with an accuracy of 0.05 - 0.1 eV.
-
Product
Kelvin Probes (F832) F83203S0001L650
1017306
-
The Kelvin Probes (F832), specifically model F83203S0001L650, are high-performance coaxial probes expertly designed for exceptional performance across a temperature range of -45°C to +200°C. These probes are ideal for a variety of applications requiring precise temperature measurements, making them indispensable tools in both laboratory and industrial settings. The design focuses on ensuring not only accuracy but also durability, utilizing high-grade materials such as beryllium copper and brass for the construction of the plunger and barrel, respectively, both plated in gold for superior conductivity.
-
Product
SEA CLIP™ Sensor & Aqua MER™ Meter
-
The SEA CLIP™ by Swain Meter is a high-quality, hydraulically actuated clamp-on DC ammeter for ROV. It is useful for measuring DC currents in subsea cables, cathodic protection systems, and subsea pipes up to 4” in diameter. The SEA CLIP™ can be used with an optional 200-foot cable to a topside meter, or in concert with the Aqua MER™ subsea meter at depths up to 6900 feet of seawater.The Aqua MER™ ROV meter is based on Swain’s proven MER2™ technology, specially adapted to the demanding requirements of the subsea environment and updated to provide RS-485 communication over twisted pair, or fiber optic data transmission protocols.
-
Product
PEEK Platinum Sheet Electrode Clip
PCP1
-
PEEK platinum sheet electrode clip designed for securely holding working electrodes in electrochemical experiments. Compatible with carbon paper, carbon cloth, ITO glass, metal foils, and other flat electrode substrates. Manufactured from chemically resistant PEEK with a platinum contact for excellent electrical conductivity, making it suitable for electrocatalysis, fuel cell research, corrosion studies, battery testing, and laboratory applications.
-
-
Product
Self-Adhesive Clips for Liquid/Chemical Sensor Rope
ENVIROMUX-CLP10-LD
-
Use to prevent sensor rope cable from shifting after installation. Self-adhesive backing for easy installation. Material: Nylon. Quantity: 10 clips. Compatible with ENVIROMUX-LDSx-y, ENVIROMUX-CDSx-y, ENVIROMUX-LDx-y and ENVIROMUX-CDx-y.
-
Product
Kelvin Probes F81912B0002G2020
1137519
-
The Kelvin Probes F81912B0002G2020, part of the 1137519 SKU family, is a high-performance coaxial probe designed to operate within a temperature range of -45°C to +100°C. The F819 series is characterized by its precision engineering, making it ideal for high-precision measurements in various electronic testing environments. Featuring a compact design and robust construction, this probe guarantees reliable connections with minimal contact resistance, allowing for efficient testing applications across a wide range of devices.
