Kelvin Clips
A spring clip where the jaws are insulated from each other at the hinge point. 4-wire
See Also: Clips, Alligator Clips, DIP Clips, IC Clips, Test Clips
-
Product
Kelvin Probes (F822) F82241S0009L650S2
1018725
-
The Kelvin Probes (F822) F82241S0009L650S2, cataloged under Order code 1018725, are high-performance coaxial probes designed for precision in various electrical applications. These probes are capable of operating within a temperature range of -45°C to +200°C, ensuring reliability in extreme conditions. The F822 model stands out with a 5.50 mm pitch, and its robust design incorporates key mechanical features to enhance usability and effectiveness. With a continuous current rating of 6.00 A and a typical contact resistance of 60 mOhm, these probes demonstrate remarkable efficiency for critical measurement tasks.
-
Product
HW-2: 100 ea. front panel clip nuts. (Optima 19” Instrument Cases only).
HW-2
-
HW-2: 100 ea. front panel clip nuts. (Optima 19” Instrument Cases only).
-
Product
Replacement Long Alligator Clips for High Voltage Differential Probe
PK-HVA-04
-
Replacement Long Alligator Clips for High Voltage Differential Probe
-
Product
Kelvin Probes (F800/F805) F80518B0002G250
1031155
-
The Kelvin Probes (F800/F805) F80518B0002G250 is an advanced measurement tool designed for precision in low-temperature environments. With a versatile temperature range of -45°C to +200°C, this probe offers reliability for various applications in scientific research and industrial use. The specifications highlight a pitch of 2.20 mm (87 mil), making it suitable for detailed measurements where space is limited.
-
Product
Small Full Safety Insulated Crocodile Clip
126017/Colour
-
IEC 1010 Rating: 300 Volts CAT II Double/Reinforced Insulation 10AmpsStandard Colours: Black, Red, Green, Blue, Yellow, WhiteFeatures: Will accept all standard 4mm plugs.
-
Product
Conversion Kit for Kelvin Holders
KC-4
-
Integrating Spheres are essential tools for photometric research laboratories & lamp / luminaire manufacturers. To derive the best results from Integrating Sphere Photometry, precision lamp holders are necessary
-
-
Product
L-Type Multi-Purpose Platinum Sheet Electrode Clip
EH-1
-
EH-1 L-Type Multi-Purpose Platinum Sheet Electrode Clip is an electrode holder, clip or electrochemical cell accessory designed to position electrodes securely and provide stable electrical connection during laboratory electrochemical testing.
-
Product
Guide Bolt "clip"
-
Guide bolt for LOXX top part. The guide bolts are used for precise guidance between the board support plate and the hold-down plate. The "clip" version is an optimised guide bolt that can be attached quite easily with a "CLICK".
-
-
Product
Relative Humidity Kelvin Probe
RHC
-
The Relative Humidity Kelvin Probe (RHC) systems are the ideal solution for monitoring samples in a controlled atmosphere for contact potential difference (CPD)/work function (Φ) measurements.
-
Product
Wide Jaw Kelvin Lead Set
6730
-
Wide Jaw Kelvin Lead Set. True wire four wire lead set with gold plated alligator clips that open to a wide .800? (20.3mm).
-
Product
Kelvin Probe (F832) F83216S0023L650
1052948
-
The Kelvin Probes (F832) F83216S0023L650 represent a high-performance solution designed to meet the demanding requirements of precision electrical measurements in various environments. With a reliable temperature range of -45°C to +200°C, these coaxial probes can handle extreme conditions while maintaining accuracy. The design features a pitch of 5.50 mm, ensuring optimal signal delivery while minimizing contact resistance, which is typical at just 60 mOhm for the continuous current of 6A. This makes them ideal for applications requiring frequent and reliable connectivity.
-
Product
Kelvin Probe Systems
-
Kelvin probe measures the work function difference between the tip and the sample when in thermoequilibrium state (a), and measures the electrical potential when the sample is illuminated (b), which is the sum of the difference in workfunction and internal/external-applied voltages.
-
Product
Kelvin Probes (F832) F83239S0001L650
1000766
-
The Kelvin Probes (F832) F83239S0001L650 are precision-engineered coaxial probes designed for high-performance applications in temperature measurement and electrical connectivity. With a temperature range of -45°C to +200°C, these probes offer exceptional reliability and precision, making them ideal for a variety of demanding environments. The model F832 features a compact design with a pitch of 5.50 mm and a total length of 31.00 mm, allowing for easy integration into tight spaces.
-
Product
Kelvin Probes (F832) F83203S0003L650
1017308
-
The Kelvin Probes (F832) F83203S0003L650 offer robust performance and precision, designed specifically for rigorous applications in varying temperature settings from -45°C to +200°C. With a coaxial probe design and a pitch of 5.50 mm (217 mil), these probes ensure consistent performance, allowing for reliable measurements across a range of conditions. They are crafted for durability with materials such as beryllium copper for the plunger and brass for the barrel, both plated with gold to enhance conductivity and prevent corrosion, ensuring longevity in use.
-
Product
Kelvin Probe F83205S0003L650
1008284
-
The Kelvin Probes (F832) F83205S0003L650 is a high-precision coaxial probe engineered to perform optimally under extreme conditions, with a temperature range of -45°C to +200°C. This product is well-suited for applications requiring accuracy and durability, making it an invaluable tool in various sectors including electronics testing and laboratory research. With a design incorporating a nominal travel of 2 mm and a robust preload of 250 cN, users can expect reliability and consistent performance even in demanding environments.
-
Product
Alligator Clip Leads
U1781A
Accessory Kit
The Keysight U1781A is to be used with the U1700 Series Handheld Capacitor and LCR meters. These clips are shipped as standard with every handheld capacitor or handheld LCR meter.
-
Product
Kelvin Probes (F822) F82205S0007L650IK25
1009720
-
The Kelvin Probes (F822) F82205S0007L650IK25 is an essential coaxial probe designed for precise electrical and mechanical applications. With a pitch of 5.50 mm, this probe operates effectively in temperature conditions ranging from -45°C to +200°C, ensuring reliability in various environments. It is built to handle continuous currents of up to 6 A and features a typical contact resistance of 60 mOhm, making it suitable for high-frequency applications with an impedance of 50 Ohm and a frequency range of up to 1.2 GHz.
-
Product
Kelvin Probe F83211S0022L650
1045235
-
The Kelvin Probe F83211S0022L650 (item number 1045235) is a Contact Probe for precise four-wire resistance measurements. The separate current and voltage paths in F83211S0022L650 support four-wire measurements in which lead and contact resistance have minimal influence on the result. The impedance specified for F83211S0022L650 is 50 Ω. The frequency range of F83211S0022L650 extends up to 1.2 GHz. The pitch of F83211S0022L650 is 5.5 mm / 217 mil. For F83211S0022L650, spring forces for the outer and inner contacts are 450 / 200 cN.
-
Product
Ambient Single Point Kelvin Probe System
-
This single point Kelvin Probe System operates under ambient conditions and is small enough to be placed in a customized glowth box. The probe head operates with an oscillating membrane and can be easily exchanged. The preamplifier is integrated inside the probe head.
-
Product
Stainless Steel Electrode Clip (316 SS)
EC-1
-
EC-1 Stainless Steel Electrode Clip (316 SS) is an electrode holder, clip or electrochemical cell accessory designed to position electrodes securely and provide stable electrical connection during laboratory electrochemical testing.
-
Product
Kelvin Probes (F822) F82203S0015L650
1017249
-
The Kelvin Probes (F822) F82203S0015L650 is an advanced coaxial probe meticulously designed for high-precision measurements across a diverse temperature range of -45°C to +200°C. With a pitch of 5.50 mm (217 mil), it ensures optimal connectivity and performance, making it a reliable choice for various applications in demanding environments. This probe’s exceptional construction features a beryllium copper plunger, plated with gold, ensuring not only excellent conductivity but also resistance to corrosion and wear, thus enhancing its longevity and reliability in critical situations.
-
Product
Mag Lead w/Alligator Clips
138
-
*54" Test Lead Set *Mag Lead features a magnetic disconnect. *You can "stick" to any metallic ground or test point. *Time saving product - can substitute for alligator clips at metallic test points. *Now, when you need alligator clips, you've got them! *Fits almost all DMM's and hand held scopes. *Get the Mag Lead, it stays put and won't fall off!
-
Product
Kelvin Probes (F822) H832KBAT
1107999
-
The Kelvin Probes (F822) H832KBAT is a high-precision measurement tool designed for various industrial applications. With a pitch of 5.50 mm (217 mil), this probe is engineered to deliver accurate readings while ensuring durability and reliability. Its internal thread specification of 4.0X0.5 and flux-proof connection type (plug) enhance its functionality, making it suitable for various environments where precision is crucial.
-
Product
Test Clips
-
Angled Nose allows tight hold on 66 blockUse on 110 block with jumper and bed of nailsUse on larger cables with single piercing nail
-
Product
Plunger Clip
BU-00201-0
-
Plunger clip • Material: Cap & Body: glass filled nylon; Spring: Stainless steel; Contact: beryllium copper; insulator to a single contact point • Length: 1.75” (44 mm)(BU-00201-*); 2.50” (63 mm)(BU-00202-*); 3.50” (88 mm)(BU-00203-*); • *Std Colors: -0 Black -2 Red • Rating: 1000 Volts, 10 Amps.
-
Product
Bed of Nails Test Clips
142-2
-
These multi-purpose test clips are a great way to tap live readings. Unique micro pins cause less damage, should you decide to pierce the wire's insulation.
-
Product
Single-Point Kelvin Probe
-
Our Single-Point Kelvin Probe system (KP020) is the introductory system in the KP Technology product family. The off-null signal detection method allows high-quality measurements of the Work Function/Fermi Level of materials.
-
Product
Dip Clip, 14 Pin With Nickel Silver Contacts
5114
-
Pomona DIP Clip? test clips are designed fortesting dual-in-line IC packages on PC boards. Thesedevices incorporate many built-in features that assurea positive electrical connection as well as hands freetesting.
