Product

Clock And Trigger Synchronization System

CLKSYNC-40

-

Delphi Engineering Group, Inc

CLKSYNC-40 - Delphi Engineering Group, Inc

CLKSYNC-40 is a clock and trigger distribution system that provides multiple, independent copies of clock and trigger signals for multi-channel, Giga-sample ADC and DAC boards. Up to sixteen independent ADC or DAC clocks and triggers are synchronized.

Product

Synchronization

UDD25

-

Plura

UDD25 - Plura

UDD25 displays built with dual 6 digits, 25 mm digit height, 19”,1RU housing. UDD25 displays are designed and engineered to perfection.

Product

PCI Bit Synchronizer

LS-40-P

-

Lumistar Inc.

LS-40-P - Lumistar Inc.

The Lumistar LS-40-P PCI Bit Synchronizer provides optimal reconstruction of a serial PCM data stream that has been corrupted by noise, phase jitter, amplitude modulation, or base line variations. The all-digital design assures a consistent product with high reliability and long-term stability. The LS-40-P PCI Bit Synchronizer consists of the LS-40-DB Bit Synchronizer Daughterboard shown below mounted on a PCI carrier board.

Product

Synchronous Condenser

-

GE Vernova

GE Vernova

GE Vernova’s Synchronous Condenser Systems are engineered and designed to provide a highly reliable and efficient solution to address reactive compensation and voltage support requirements, providing transmission operators an optimized solution for cost, performance and operational flexibility.

Product

Bit Synchronizers, Decoms, and DACs

-

Lumistar Inc.

Lumistar Inc.

Lumistar offers bit synchronizer boards compatible with the PCI bus, VME bus, and daughter-boards for use with various Lumistar products.

Product

Clockand Trigger Synchronization Board

CLKSYNC-PCI

-

Delphi Engineering Group, Inc

CLKSYNC-PCI - Delphi Engineering Group, Inc

CLKSYNC-PCI is a clock and trigger distribution board designed to provide up to eight synchronous clock and trigger outputs. The CLKSYNC-PCI is designed for use with multi-channel, ADC and DAC systems where clock and trigger synchronization are required.

Product

Ethernet Extensions

-

CXR ANDERSON JACOBSON

CXR ANDERSON JACOBSON

CXR offers a full range of access solutions and Ethernet extension on any type of media - copper, fiber optics and wireless, as well as through a network TDM PDH / SDH or linkage via modem serial interface X21 / V35.

Product

Ethernet PHY

-

Macom Technology Solutions Holdings Inc.

Macom Technology Solutions Holdings Inc.

MACOM’s portfolio of 10G/25G/40G/50G/100G Ethernet Physical Layer (PHY) devices offer unparalleled performance while maintaining high density at low cost. Integrated high-speed, high performance mixed signal I/O using advanced CMOS process nodes support a variety of optical and copper connectivity interfaces allowing the Ethernet PHY product line to span rack and cluster connectivity within the data center, wireless fronthaul, midhual and backhaul connectivity for 5G wireless infrastructure, and seamlessly extend to core networks over DWDM optical links. Advanced features such as in-service eye monitors, traffic monitoring, optical module identification and link training are just a few of the advantages that MACOM’s portfolio provides for end users to leverage for faster bring up, higher reliability and smarter networks.

Product

Ethernet

-

Arasan Chip Systems, Inc.

Arasan Chip Systems, Inc.

Arasan Chip Systems has a complete portfolio of Fast (10/100) Mbps and Gigabit (10/100/1000) Mbps and now 10Gigabit Ethernet IP. Our high quality IP has completed the rigorous interoperability tests at UNH-IOL laboratories and has been widely licensed. Arasan also provides a portable Ethernet driver.

Product

Ethernet Switch and Router

VPX6-684

-

Curtiss-Wright Defense Solutions

VPX6-684 - Curtiss-Wright Defense Solutions

Curtiss-Wright's VPX6-684 FireBlade provides Systems Integrators with a fast, secure and unified approach to interconnect subsystems, chassis, cards, and compute nodes within any given platform using 1 or 10 Gigabit Ethernet links. Providing up to 24 wirespeed 10/100/1000 Mbps interfaces and up to four 10 Gbps interfaces in a single 6U VPX slot, the VPX6-684 Ethernet Switch is ideal for architecting system-wide Intra-Platform Networks (IPNs).

Product

Multibus Ethernet Card

MS 1750

-

Meltronics Systemtech

MS 1750 - Meltronics Systemtech

- Processor: LPC3250 processor with ARM 9 core running at 266 MHz- SDRAM Memory: DDR2 256 MB (scalable to 512 MB)- Flash Memory: NAND flash 512 MB- Display & Graphics: Programmable color LCD controller supports up to a TFT interface- Touch screen: Integrated touch screen controller- Network Support: 10/100 Base-T Ethernet PHY- PC Interface: One USB 2.0 high-speed On-the-Go interface- Multibus Interface- Serial Interfaces: Up to four external UARTs- CAN 2.0B controller- Three I2C ports- Three SPI ports- GPIO: Programmable I/O depending on peripheral requirements

Product

1000M Ethernet(Tap)

-

Xtramus Industrial Instruments

Xtramus Industrial Instruments

A specialized hardware test access point (TAP) device made by Xtramus Technologies designed to copy and monitor 10/100/1000 Mbps (Gigabit) Ethernet network traffic without interrupting data flow.

Product

Automotive Ethernet Tools

-

Intrepid Control Systems

Intrepid Control Systems

Automotive Ethernet (AE) represents the latest challenge to the status quo in automotive networking. Many OEMs are now moving forward with this exciting new technology, which promises high performance at low cost, especially for infotainment applications. Capturing Automotive Ethernet Frames. Automotive Ethernet traffic cannot be monitored using the same techniques employed for buses like CAN. Ethernet networks use star topology, so there is no single point to monitor an entire network. The sophisticated technology employed also means bit values cannot be interpreted directly from voltage levels. Finally, Ethernet hardware silently discards erroneous frames, making diagnosing problem conditions difficult. Intrepid’s tools are designed to address all of these issues conveniently and efficiently.

Product

EN50155 Ethernet Switches

EKI-9510 series

-

Advantech Co. Ltd.

EKI-9510 series - Advantech Co. Ltd.

EKI-9510 series switches, built for railway applications, feature rugged IP67 design, M12 connectors, PoE options, and comply with EN50155 & IEC61373.

Product

Synchronization And ASOPS Systems

-

Menlo Systems Gmbh

Menlo Systems Gmbh

The asynchronous optical sampling (ASOPS) technique allows high-speed scanning over some nanoseconds of time delay without a mechanical delay line. The SYNCRO-RRE, also available as stand-alone unit, provides state-of-the art phase lock electronics.

Product

Serial to Ethernet Connector

-

Electronic Team, Inc.

Electronic Team, Inc.

With Serial to Ethernet Connector you can share up to 255 serial devices over network turning your computer into a terminal server. With this serial over network solution any device connected to a COM port can be accessed and used from any spot on the globe as if it were physically connected to the local machine. The data sent by serial port device is transmitted over a TCP/IP network. This is achieved thanks to our virtual serial port technology that emulates standard COM ports behavior and Windows OS treats the virtual ports as the real ones. Although the ports are treated as physical you are not limited to the quantity of physical COM ports and can create COM port connections without occupying real serial ports. With Serial to Ethernet Connector you can: share serial port for incoming connections, connect the port to remote host, or share port using UDP connection. Starting from version 7.0 Serial to Ethernet Connector got absolutely new user interface for even easier creation and management of connections with latter conveniently visualized and more.

Product

M12 Ethernet Cables

-

NI

NI

Connect compatible FieldDAQ devices to network hubs or switches, without the need for a router in the middle.

Product

Synchronous GPS Based I/O Controller & Interrupter

interX

-

Dimax

interX - Dimax

interX was originally developed as a measurement instrument for industrial and trunk pipeline anodic or cathodic protection systems. interX allows facilitate measurement of galvanic parameters (instant-off polarized potentials, pipe-to-soil potential) across a wide range of timing cycles. It is used to make synchronous disconnect and reconnect of protection electrodes (anode or cathode) or rectifier's from/to buried underground pipeline to perform measurements.