TEGAM Inc.
TEGAM designs, manufactures and calibrates instrumentation that impacts your daily life in surprising ways. Our goal is to make your measurement task easier, faster and more accurate. We continuously invest in R&D of products and calibration techniques that allow you to make your critical measurements with the highest confidence. Our electrical measuring capabilities include temperature, RF power, and micro-Ohms.
- 800-666-1010
(440) 466-6100 - (440) 466-6110
- sales@tegam.com
- 10 Tegam Way
Geneva, OH 44041
United States
-
product
RTD / Thermistor Thermometer
866
Tegam's Model 865 & 866 digital, thermistor thermometers measure temperatures from -70°F to 300°F, (-55°C to 150°C). Compatible with all YSI Series 400 probes, temperature measurement is performed with a basic accuracy of .3%. These thermometers are specially constructed with a heavy duty ABS case specifically designed for durability and resistance to contaminants such as dust and most chemicals.
-
product
Temperature Probe, Type K, Penetration
8734
For measuring semi-soft materials within a restricted temperature range. Compact size makes this probe easy to transport. The 403 stainless steel sheath has a pointed tip and is 3-3/4" long with a 2" handle. Thermoplastic rubber, coil-styled cord extends from 1-1/2 feet to 5 feet.
-
product
Thermocouple Thermometer, Dual Input / Analog Output
871A
Industry''s leading handheld thermometers that feature analog outputs for use with chart recorders or computer I/O cards, the 870 series has dual thermocouple inputs and respective linear analog outputs which produce 1mV/C or 5/9 mV/F in the 200 ranges and .1mV/C or 5/90 mV/F in the other ranges. The Model 871A uses Type K thermocouples to measure a temperature range from -40 to 1999F (-40 to 1370C) and the Model 872A uses type J thermocouples to measure from -40 to 1400F (-40 to 760C).
-
product
Dual Input Handheld Digital Thermometer
820A
Model 820A dual input, digital, thermometers are compatible with type K or J thermocouple probes to provide temperature measurements from -346F to 2502F. The heavy-duty case is designed for durability and resistance to external contaminants such as dust and chemicals. The case has a built-in tilt bail for hands-free or bench top operation.
-
product
Temperature Probe, Type J, Immersion
8723
For fast response measurement of liquids, gases, or small area surfaces. Sheaths are 5" in length and are constructed with 304 stainless steel. The thermal junction is physically located at the tip of the probe. 3-ft vinyl-clad straight cord. Model 8713 is a Type-K thermocouple probe and Model 8723 is a Type-J thermocouple probe.
-
product
31 MHz Function / Arbitrary Waveform Generator
2720A
TEGAM combines the best of both worlds in signal generation: the low cost, ease of use, and sweep/modulation capabilities of the Direct Digital Synthesis (DDS), function generator architecture and the unprecedented accuracy and precision of a true arbitrary waveform generator. Create and generate high-speed, standard, or user-defined waveforms ranging from 1 Hz to 50 MHz.
-
product
Economical Thermocouple Thermometer °C (Type K)
874C
Tegam''s 874F and 874C Budget Series thermometers provide the economical solution for general-purpose temperature measurement needs. The units accept type K thermocouples and probes. Constructed with ABS material for resistance to inorganic salts, alkalies, and many acids and exceptional durability, this meter is designed for the toolbox and for use in the field.
-
product
Dual Input Handheld Digital Thermometer
821A
This dual input thermometer is functionally the same as the Model 820A except that type T thermocouple compatibility is added to expand the meters compatibility to the most common thermocouple types. Option #8204, protective rubber boot & belt clip, and other accessories compatible with Models 819 and 820, are also available for this device.
-
product
RH Setpoint Controller and Probe
RHS-1
Model RHS-1 Relative Humidity Set point controllers are simple to install and offer dependable performance for monitoring relative humidity. Each set includes a dial-type set point controller and a stainless steel humidity probe. The probe may be mounted up to several thousand feet from the controller.
-
product
Precision Power Amplifier, High Voltage, Single Channel
2340
The Model 2340/2350 High Voltage Amplifier expands the amplitude range of any standard, 50 function, pulse, or waveform generator to 400 volts p-p. Model 2340/2350 comes standard with a fixed gain of +50, and gains from 10 to 100 are available as special order.
-
product
1000V AC/DC Safety Voltmeter - Category III
110A
With a range of 1,000 volts it is more versatile than the Wiggy and smaller and more accurate than the Simpson 260. The instrument has over 1M of resistance in each test lead to protect the user and the instrument and is designed to withstand up to 2,500 volts and keep on working. This meter will not buzz, vibrate, blow up, or melt down. UL approved. Category III overvoltage tested
-
product
Low Cost RF Power Sensor Calibrator (100 kHz to 18 GHz)
1827
Calibrates 100 kHz to 18 GHz RF power sensors in 30 minutes or less; two Switchable RF inputs; Thermistor RF Power Standard is internally temperature controlled; Type IV Bridge Circuitry; DC Power Levels can be measured to within 0.003%.
-
product
Attenuator & Signal Calibrator (30MHz Receiver)
VM-7
The TEGAM Model VM-7 is a 30MHz receiver that performs precise measurement of RF power ratios over a wide dynamic range. It offers averaging, high resolution, and offset features to improve measurements and speed accessible through front panel keystrokes, or remotely through a GPIB controller.
-
product
Low Cost RF Power Sensor Calibrator (10 MHz to 18 GHz)
1825
Calibrates 10 MHz to 18 GHz RF power sensors in 30 minutes or less; Thermistor RF Power Standard is internally temperature controlled; Type IV Bridge Circuitry; DC Power Levels can be measured to within ±0.003%.
-
product
High Temperature RH & Temperature Probe Transmitters
HTRH-D
TEGAM''s high temperature solution for RH and temperature monitoring under high temperature conditions. The Humitran-T Series transmitters measure humidity levels from 3% to 95% RH and temperatures from -40F-356F (-40C-180C). Probes are constructed with stainless steel and Teflon cable. Model HTRH-W is a 2.5" long X .625" diameter probe supplied with a wall mounting bracket.
