Abaco Systems Inc
With more than 30 years of experience, Abaco Systems is the global leader in open architecture rugged embedded systems. We deliver market-leading commercial off-the-shelf and custom products, together with best in class program lifecycle management. This, together with our 800+ professionals’ unwavering focus on our customers’ success, reduces program cost and risk, allows technology insertion with affordable readiness and enables platforms to successfully reach deployment sooner and with a lower total cost of ownership. With an active presence in hundreds of national asset platforms on land, sea and in the air, Abaco Systems is trusted where it matters most.
- 1-866-652-2226
- 8800 Redstone Gateway
SW, Ste 200
Huntsville, AL 35808
United States of America
-
Product
OpenVPX SBC
SBC347D 3U
-
The VPXcel3 SBC347D rugged single board computer is based on the highly integrated Intel® Xeon® D processor platform. The multiple core Xeon D brings the high performance of Intel Xeon processors into a dense, low power system-on-chip solution, ideal for High Performance Embedded Computing (HPEC) applications.
-
Product
Digital Input Board
VME-1128
-
VME-1128 is a 128-bit High-Voltage Digital Input Board with Built-in-Test. This product complies with the VMEbus specification (ANSI/IEEE STD 1014-1987, IEC 821 and 297) with the following mnemonics: A24:A16:D32/D16/D08 (EO): Slave: 39/3D:29/2D Form factor: 6U
-
Product
Mezzanine System
5041
-
ECM P/N 5041 provides eight channels of RS485 / RS422 I/O with fixed 120 ohm termination for each channel. Speeds are up to 30M bits per second. All channels power up as inputs. Also transceiver inputs are always enabled for loop back diagnostic use when the outputs are enabled. Software can enable outputs on a channel by channel basis.
-
Product
Software
LV-1553
-
The LV-1553 software is the interface to operate Abaco Systems' MIL-STD-1553 USB, XMC, PCIe, PCI, cPCI, ExpressCard, PCMCIA, Q104-Plus, AMC and VME boards with National Instruments’ LabVIEW graphical programming environment.
-
Product
Rear-Panel I/O Transition Module
CP3-GESW8-TM8
-
CP3-GESW8-TM8 is a rear-panel I/O transition module providing flexible access to CP3-GESW8 or NETernity™ CP3-GESW8N rear-panel I/O. Up to eight Gigabit Ethernet ports of the switch are accessible from the transition module's stacked RJ-45 connectors. Each Ethernet port is routed as four 100 Ohm differential pairs.
-
Product
GPGPU Board
GRA115Q
-
The GRA115Q is a rugged 3U VPX graphics output and high-performance computing GPGPU board based on the NVIDIA Turing™ architecture. It is an ideal solution for graphics/display processing applications such as situational awareness, and moving map applications as well as general purpose graphics processing unit (GPGPU) applications such as radar and video surveillance/analysis.
-
Product
Analog I/O Board
VME-3128A
-
The VME-3128A scans 16, 32, 48 or 64 channels, continually digitizes all of them and stores the results. Choose from 64 differential or single-ended inputs and program VMEbus interrupts and interval timer to meet the unique requirements of your mission.
-
Product
Mezzanine System
5158
-
The 5158 Electrical Conversion Module (ECM) provides eight (8) RS-232 outputs and eight (8) RS-232 inputs. Built around Maxim 1488 & 1489 chips for true RS232 levels and voltage tolerance, all outputs come up in the 1, mark or idle state. Electrically this is a negative output voltage, the start bit is always a 0 or a positive voltage level.
-
Product
FPDP XMC/PMC Module
SPR507B
-
Designed for applications where the sensor is geographically remote from the backend processor, the SPR507B combines high performance technologies with flexible integration options to deliver remote data at high speeds with accuracy and reliability.
-
Product
Expansion Adapter Chassis
TB3-TO-CMC-LP
-
The TB3-TO-CMC-LP is an expansion adapter chassis using the Intel Thunderbolt 3 interface. The adapter allows the use of a front I/O XMC or PMC card outside its normal confines of a single board computer (SBC) or PC hosted carrier card. The TB3-TO-CMC-LP enables the deployment of XMC or PMC modules in systems previously unable to host them -- laptops, small form factor PCs, and other computers lacking add-in slots.
-
Product
SBC
SBC314
-
The SBC314 offers a high performance option based on the T2081 processor and a low power option based on the T1042 processor, allowing users to select a solution tailored to their application. The T2081 brings the benefits of AltiVec co-processing to a dual threaded 4-core platform (offering 8 virtual cores); while, the T1042 is optimized for lower power consumption applications, consuming less than 7.5W.
-
Product
18" Ribbon Cable
RCONM50-D25-2
-
An 18" ribbon cable transitions from individual IP Module ribbon connectors on the PCI carrier board to a 25 pin female D-sub connector mounted on a PC expansion card end-panel.
-
Product
Interface
R15-LPCIE
-
Abaco Systems Embedded Systems’ R15-LPCIE is the latest generation of performance and flexibility for MIL-STD-1553A/B Notice II on a low profile PCI Express module. Available in -40 to +70 temperatures (with relays) and -40 to +85 temperatures (without relays) with one or two dual-redundant channels. The R15-LPCIE includes advanced API (Application Programming Interface) software that reduces application development time.
-
Product
Development Kit
-
The VP430 is 3U VPX RF processing system featuring the transformational Xilinx® Zynq® Ultrascale+™ RF system-on-chip technology (RFSoC). The ZU27DR device used on the VP430 includes eight integrated analog-to-digital converters at 4GSPS, eight digital-to-analog converters at 6.4 GSPS, a user-programmable FPGA fabric, and multi-core Zynq ARM® processing subsystem.
-
Product
Interface
RAR-USB
-
The RAR-USB is further evidence of Abaco Systems’ commitment to making available avionics solutions that are powerful and flexible, and that respond to the needs of customers.
Parent
-
AMETEK Inc.
AMETEK is a global leader in electronic instruments and electromechanical devices. AMETEK consists of two operating groups: Electronic Instruments - a leader in the design and manufacture of advanced instruments for the aerospace, power, process and industrial markets. Electromechanical - a differentiated supplier of electrical interconnects, precision motion control solutions, specialty metals, thermal management systems, and floor care and specialty motors.
Siblings
-
Ametek Compliance Test Solutions
AMETEK-CTS is a global leader in EMC compliance testing and RF power amplifiers. AMETEK has been designing and manufacturing precision instruments for more than 50 years. Under the brand names of EM TEST, Teseq, IFI and Milmega the company produce a wide range of specialist solutions aligned to the individual needs of equipment manufacturers across a variety of industries.
Siblings
-
MOCON, Inc.
AMETEK MOCON is the global leader in the design, development, manufacture, and support of gas measurement and control instruments and services
Siblings
-
AMETEK Measurement & Calibration Technologies Division
Measurement & Calibration Technologies provides calibration instruments for temperature, pressure and process control. It also is a leader in level measurement devices, continuous position sensors, hardness testers, force measurement devices and retractable cord reels. In addition, it offers a line of weathering test instrumentation along with laboratory and outdoor testing services.
Siblings
-
Ametek Materials Analysis Division
The AMETEK Materials Analysis Division´s goal is to be the recognized market leading provider of world-class analytical systems, nuclear instrumentation and digital imaging solutions.
Siblings
-
Process & Analytical Instruments division of AMETEK
Process & Analytical Instruments is a leader in analyzers, monitors and other instruments used by oil, gas, chemical/petrochemical, pharmaceutical, semiconductor, factory automation and other process industries. In addition, it offers a wide range of oil field and laboratory testing instruments, infrared temperature measurement devices, subsea and ultra-deep water fluid and flow measurement equipment, and specialized sampling, extraction, transport and conditioning systems.
Siblings
-
Ultra Precision Technologies Division of Ametek
Ultra Precision Technologies is a leader in the development of ultra precise measurement devices and precision machining systems. It also is a leader in ophthalmic instruments and eye care diagnostic devices, optical lens manufacturing equipment, vibration cancellation systems and enclosures, and advanced scanners used in reverse engineering, quality assurance and 3D printing.
Siblings
-
AMETEK Programmable Power, Inc.
Located in San Diego, CA, AMETEK Programmable Power designs, manufactures, and markets precision, AC and DC programmable power supplies, electronic loads, application specific power subsystems, and compliance test solutions for customers requiring and valuing differentiated power products and services. Also part of our business is VTI Instruments, which delivers precision modular instrumentation and systems for electronic signal distribution, acquisition, and monitoring, used in the world's most demanding test applications.
Siblings
-
Ametek Power Instruments
AMETEK Power Instruments serves the world-wide electric power generation and distribution industries with our advanced instruments and monitoring systems. We offer an extensive sales and service network around the globe including the US, UK and Asia. We can provide fault recorders, power line carriers, high accuracy revenue meters, alarm management and much more for your power generation, transmission and distribution needs. Our engineers have decades of design experience and work with each client to meet their stringent requirements. AMETEK Power Instruments has over 50 years of experience partnering with leading Fortune 500 companies.
Siblings
-
AMETEK Thermal Process Management
Thermal Process Management (TPM) is a Business Unit in the Process Analytical and Instrumentation Division of AMETEK. TPM is comprised of 5 companies with unique and distinguished product solutions, leading share in their respective market space, and operating with considerable market synergies. TPM manufactures industry leading thermal management systems, winterization solutions for instrumentation, and process extraction, transport, and conditioning systems.
Siblings
-
Barben Analytical
AMETEK® Barben Analytical is a market-leading supplier of analytical measurement solutions for the process industries. We design, manufacture, and sell a broad range of industrially hardened instruments, including pH and ORP electrochemical sensors, as well as gas and liquid phase optical oxygen analyzers.
Siblings
-
Ametek Spectro Scientific
Spectro Scientific, an ISO 9001:2008 company, specializes in analytical tools and software for machine condition monitoring. The company is one of the largest suppliers of oil and fuel analysis instruments to industry and the military worldwide. Industry clients include petrochemical, mining, marine and power generation companies as well as commercial testing laboratories. Spectro Scientific’s extensive product offerings include spectrometers for wear metal analysis, lubricant degradation and contamination analyzers, particle analysis instruments and complete turnkey systems for oil or fuel analysis laboratories, all managed by its SpectroTrack software platform.
Siblings
-
Haydon Kerk Pittman
Haydon, Kerk and Pittman are three world class AMETEK brands that supply advanced linear and rotary motion solutions to a diverse mix of global customers. We are recognized as a leading manufacturer of brushed and brushless DC motors, stepper motor based linear actuators, precision Acme lead screw and anti-backlash nut assemblies, linear rail and guide systems, gearmotors, drives and complete custom automation sub-systems.
Siblings
-
NSI-MI Technologies
NSI-MI Technologies is the leading global supplier of antenna, RF, and microwave testing equipment. With a team of highly respected technical experts, we are committed to providing top-notch engineering solutions and advanced products for a wide range of industries that require precise measurement, motion control, and data acquisition.
Siblings
-
United Electronic Industries, Inc.
Produces data acquisition hardware, signal conditioning and support software as needed in today's sophisticated, demanding test environments...
Siblings
-
RTDS Technologies
Being the first of its kind, the RTDS® Simulator is the world’s benchmark for performing real time power system simulation. With satisfied customers in 42 countries across the globe and over 1400 units in operation, RTDS Technologies is the undisputed world leader in our craft. We introduced the world’s very first fully digital real time power system simulator in 1989. RTDS Technologies continues to lead the way with our world-class, in-house research and development department. Our company is committed to innovation. We are continually developing our hardware, software, and support services in response to the needs of our customers.
