PCB Piezotronics, Inc.

Product

Reusable ICP® Strain Gauge

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

This high-resolution dynamic alternative to bond foil strain gauges uses a quartz sensing element in a durable, titanium housing. It has 0.0006 microstrain resolution, 5 volt output, 100k Hz frequency response and 0.5 gram mass for lightweight test articles. The reusable sensor comes with a calibration certificate, attaches to the test specimen in 60 seconds and is removed in 10 seconds.

Product

Modal Shakers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

The Modal Shop’s modal shakers are a proven solution in test laboratories around the world. With force ratings from 4.5 to 100 lbf (20 to 440 N), these shakers are suitable for a wide range of modal analysis applications. When performing experimental modal analysis and structural testing, the choice of excitation function and system will make the difference between a good measurement and a poor one. For many applications, an electrodynamic shaker system is the ideal choice. The Modal Shop’s line of modal shakers is designed to be highly portable, rugged and easy to set up in order to facilitate the best testing results. The exciter size allows a diversity of placement locations relative to the test structure, while minimizing any unwanted interaction between the exciter and test structure.

Product

ICP Microphone System

378A14

-

PCB Piezotronics, Inc.

378A14 - PCB Piezotronics, Inc.

This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration.

Product

Precision Condenser Microphone

377B02

-

PCB Piezotronics, Inc.

377B02 - PCB Piezotronics, Inc.

1/2" free-field, prepolarized condenser microphone, typical sensitivity= 50 mV/Pa (+/-1.5 dB), 3.15 Hz to 20 kHz (+/-2 dB).

Product

High Sensitivity Pressure Sensors

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

High sensitivity ICP® pressure sensors are for low pressure measurements requiring excellent resolution and small size. They are used to measure small dynamic hydraulic and pneumatic pressures such as turbulence, noise, sound, and pulsations, especially in adverse environments. They are capable of measuring high-intensity sound pressures from 111 to 210 dB at any static pressure level from full vacuum to 1,000 psi (6,895 kPa).

Product

Microphone Preamplifier

426A05

-

PCB Piezotronics, Inc.

426A05 - PCB Piezotronics, Inc.

Preamplifier for 1/4" side vented prepolarized microphones.

Product

Accelerometers

356A02

-

PCB Piezotronics, Inc.

356A02 - PCB Piezotronics, Inc.

Sensitivity (10 %)10 mV/g1.02 mV/(m/s) Measurement Range:500 g pk4900 m/s pk Frequency Range: (5 %)1 to 5000 Hz1 to 5000 Hz Frequency Range: (10 %)0.5 to 6000 Hz0.5 to 6000 Hz Resonant Frequency:25 kHz 25 kHz Broadband Resolution (1)0.0005 grms 0.005 m/s rms Non-Linearity: (400 g, 3920 m/s)1 % 1 % Non-Linearity (500 g, 4900 m/s)2 % 2 % Transverse Sensitivity:5 % 5 %.

Product

General Purpose Piezoelectric Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Piezoelectric accelerometers offer tremendous versatility for shock and vibration measurements. These rugged sensors can withstand adverse environmental conditions. A wide variety of configurations are available to support multiple application requirements. Specialty units are also available through mechanical or electrical design modifications or additional qualification testing.

Product

Microphone Preamplifier

426A11

-

PCB Piezotronics, Inc.

426A11 - PCB Piezotronics, Inc.

1/2-inch ICP preamplifier with gain and filter switches (for prepolarized microphones)ICP(R) low noise preamplifier with gain, filters, and TEDS

Product

Microphone Preamplifier

426A30

-

PCB Piezotronics, Inc.

426A30 - PCB Piezotronics, Inc.

1/2-inch preamplifier with 7-pin LEMO connector (for externally polarized microphones)

Product

Fatigue Rated Low Profile Cells

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Fatigue rated load cells are specifically designed for component durability and fatigue test machines where highly cyclical loading is present. These rugged load cells are extremely resistant to extraneous bending and side loading forces. They are used for material testing, component life cycle testing and structural testing. All fatigue rated load cells are guaranteed against fatigue failure for 100 million fully reversed cycles.

Product

Pressure Transducers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

An electromechanical device designed to measure pressure with a high degree of accuracy.

Product

ICP Microphone System

378C10

-

PCB Piezotronics, Inc.

378C10 - PCB Piezotronics, Inc.

This model includes a 1/4" microphone cartridge, a mated preamplifier with TEDS, and system calibration.

Product

Cryogenic ICP® Accelerometers

-

PCB Piezotronics, Inc.

PCB Piezotronics, Inc.

Cryogenic ICP® accelerometers are specifically designed to operate at temperatures below the typical -65 ºF (-54 ºC) temperature limit of most voltage mode sensors. The use of specialized, built-in, cryogenic circuitry and quartz shear sensing technology promote survivability in demanding environments such as liquid nitrogen. Each sensor is hermetically sealed and individually tested to determine the thermal coefficient of sensitivity at -320 ºF (-196 ºC) ensuring reliable operation and accurate measurements. These sensors have been successfully used in the presence of liquid helium during structural testing of rocket boosters.

Product

Precision Condenser Microphone

377C10

-

PCB Piezotronics, Inc.

377C10 - PCB Piezotronics, Inc.

Performance:Nominal Microphone Diameter:1/4"CharacteristicPressure Open Circuit Sensitivity1.0 mV/Pa1.0 mV/PaFrequency Range (2 dB)4 to 70000 Hz4 to 70000 Hz Lower Limiting Frequency (-3 dB)0.25 to 3.0 Hz0.25 to 3.0 Hz Resonant Frequency (90 Phase Shift)65000 Hz65000 HzHumidity Coefficient of Sensitivity (0 to 100%, non-condensing)0.0012 dB/%RH0.0012 dB/%